求助：Cadence生成光绘文件出现警告，无法消除

Cadence生成光绘文件后出现以下类似警告，并且我调整精度、尺寸什么的均不起作用，警告依然存在警告如下： WARNING: Segment with same start and end points at (342.123 1076.217)will be ignored. Increasing output accuracy may allow segment to be generated. WARNING: Segment with same start and end points at (1221.057 1072.204)will be ignored. Increasing output accuracy may allow segment to be generated. WARNING: Segment with same start and end points at (1218.757 1074.502)will be ignored. Increasing output accuracy may allow segment to be generated. WARNING: Segment with same start and end points at (2097.478 2230.525)will be ignored. Increasing output accuracy may allow segment to be generated. WARNING: Segment with same start and end points at (2297.480 2230.525)will be ignored. Increasing output accuracy may allow segment to be generated. WARNING: Segment with same start and end points at (1884.360 2665.827)will be ignored. Increasing output accuracy may allow segment to be generated. WARNING: Segment with same start and end points at (3562.512 1834.255)will be ignored. Increasing output accuracy may allow segment to be generated. WARNING: Segment with same start and end points at (179.519 2143.857)will be ignored. Increasing output accuracy may allow segment to be generated. WARNING: Segment with same start and end points at (179.519 2104.487)will be ignored. Increasing output accuracy may allow segment to be generated. WARNING: Segment with same start and end points at (2427.170 1695.526)will be ignored. Increasing output accuracy may allow segment to be generated. WARNING: Segment with same start and end points at (3214.390 1885.527)will be ignored. Increasing output accuracy may allow segment to be generated. WARNING: Segment with same start and end points at (3744.810 1705.527)will be ignored. Increasing output accuracy may allow segment to be generated.