你好,
虽然“任务”列表显示上传二进制,我不明白的地方放一个。
所以我上传到这里。如果这不是一个合适的地方,请让我知道它放在哪里。
这是第一次演示样本二矿井,采用cy8ckit-044简单迷宫项目
AdfRuIT 2.8“TFT触摸屏”。
HTTPS://www. ADAFRUIT.COM/PROTECT/1651
它利用kxtj2加速度计在cy8ckit-044通过I2C和
2.8“TFT通过SPI。
起点是左上角,目标是右下角。
你可以通过编辑“迷宫.h”来修改迷宫。
摩托罗拉
MaZe180611Cyrj.CaseV01.Zip
2.4兆字节
以上来自于百度翻译
以下为原文
Hi,
Although the "Mission" list suggests to upload binary, I could not figure out where to put one.
So I upload it here. If this is not an appropriate place, please let me know where to put it.
This is the first demo sample binary of mine, a simple maze project using CY8CKIT-044
and Adafruit 2.8" TFT Touch Shield.
https://www.adafruit.com/product/1651
It u
tilizes the KXTJ2 accelerometer on CY8CKIT-044 via I2C and
the 2.8" TFT via SPI.
The start point is upper-left and the goal is lower-right.
You can modify the maze by editing "maze.h."
moto
0