对于带有emFile的PSOC-5，“构建错误：device.h：没有这样的文件或目录”

我使用PSOC-5与PSOC创建者4.2的059个套件，并试图通过EMFLASH应用程序与SD卡接口。我已经按照EMFLASH数据表链接了所有的库，并从示例中复制了代码（删除了LCD部分）。然而，我得到以下错误：
生成错误：设备.h：没有这样的文件或目录
生成错误：命令“ ARME EABI GCC .exe”退出代码“1”失败。
工作空间和项目包与此帖子连接。
我在 论坛上看到，ARMGGC.EXE问题可能是由一个错误的安装引起的，所以我卸载了PSoC创建者——重新启动PC——然后从网站上下载文件并重新安装并重新启动了PC。什么也没变。
请让我知道我做错了什么，以及如何修复它。
注意：工作区是闪烁的LED文件（因为我修改了闪烁的LED示例项目），项目是FATFS文件。
提前感谢，
Sujoy。
CE195352O-PSoCl 5LPFATFS.Cyrj.CaseVo.01.Zip
543.1 K
CE195352O-PSoCl 5LpBLink
1.2兆字节



以下为原文
I am using PSOC-5 with the 059 Kit with PSOC creator 4.2 and trying to interface it with a SD card via the emFile applica tion. I have linked all the libraries as per the emFile datasheet and copied the code from the example (removed the LCD part). However, I get the following errors:-

Build error: device.h: No such file or directory
Build error: The command 'arm-none-eabi-gcc.exe' failed with exit code '1'.

The workspace and project bundle are attached with this post.

I read on the forum that the arm_gcc.exe issue can be caused by a faulty installation so I uninstalled PSOC creator - restarted PC - then downloaded the file from the website and installed it again and restarted the PC again. Nothing changed.

Please let me know what I am doing wrong and how to fix it.

Note:- the workspace is the Blinking LED file (as I modified the Blinking LED example project) and the Project is the FATFS file.

Thanks in Advance,
Sujoy.

• CE195352_PSoC_5LP_FATFS.cyprj.Archive01.zip543.1 K
• CE195352_PSoC_5LP_Blinking_LED.cywrk.Archive01.zip1.2 MB