怎么使用e4433B进行RF空白

您好，我正在使用E4433B，加载并成功传输波形。
我希望能够像以前使用e4438C一样使用标记，这样我就可以在波形传输完成时将空白消隐。
我所做的是创建并加载到VSG上的波形。
选择标记2并设置点范围以捕获所有波形点。
我将RF空白打开到MKR2，并在标记上显示正极性。
我将触发设置为前面板按钮，单个。
当我按下触发器时，波形会发送，但消隐不起作用。
如果我设置相同的命令序列，但在设置点的范围时，我跳过样本，然后我空白（但我当然不想跳过样本，所以这不符合我的目的）。
我已将固件更新到最新版本B.03.86谢谢，Reese



以下为原文

Hello,

I am using a E4433B, loading and successfully transmit ting a waveform. I would like to be able to use the markers as I have done previously using the e4438C so that I can blank the RF when the waveform transmission completes. What I have done is to create and load the waveform on to the VSG. Selected marker 2 and set the range of points to capture all waveform points. I turn RF blank to MKR2 on with positive polarity on the markers. I set triggering to the front panel button, single. When I hit the trigger, the waveform transmits, but blanking does not work. If I set the same sequence of commands, but when setting the range of points, I skip samples, then I blank (but of course I don't want to skip samples, so this doesn't suit my purposes).

I've updated the firmware to the latest version B.03.86

Thanks,

Reese