怎么识别Molex式连接器

你好乔，
它看起来像头部和插座可能来自JST的前两个连接器。
标题为部件号455-1995-ND，配对连接器为455-2151-ND。
我正在寻找的更大的6位连接器将发布我找到的东西。



以下为原文

Hello Joe,
it does look like the first two connectors the header and receptacle might be from JST. The header will be part number 455-1995-ND and the mating connector will be 455-2151-ND.
The bigger 6 position connector I am searching for and will post with what I find for you.

6位置连接器看起来也像是来自JST。
我找到了一个可能的连接器。
它是部件号455-2352-ND
请看看这些，看看它们是否适合您。
一个注意事项是外壳的触点单独出售。
我只需要知道您正在使用的线规尺寸，我可以帮助您了解联系方式。



以下为原文

The 6 position connector also looks like it will be from JST. I did find a possible connector. It is part number 455-2352-ND
Please take look at these and see if they will work for you.
One note is on the housings the contacts are sold separate. I will just need to know the wire gauge size you are using and I can help get you the contacts.

嗨保罗，
这太棒了！
这些看起来就像我需要的！
对于6位，我需要公母连接器（与5一样）。
6位的线径为＃12。
5位的线径为＃16。
获得所有四种连接器类型及其联系人的联系信息后，我可以向采购部门下订单！
谢谢！
问候，
Joe Carcia，NJ1Q
W1AW站管理员



以下为原文

Hi Paul,
This is awesome! These look just like what I need!
For the 6-position, I need both male and female connectors (as with the 5).
The wire size for the 6-position is #12. Wire size for the 5-position is #16.
Once I get the contact information for all four connector types and their contacts, I can place an order with our Purchasing Department!
Thanks!
Regards,
Joe Carcia, NJ1Q
W1AW Station Manager

你好乔，
我们带有6位置连接器455-2352-ND的触点。
12awg电线的插座触点为455-2377-1-ND。
12awg的Pin触点为455-2349-1-ND。
如果您需要它，我们还有一个提取工具455-2370-ND和Crimp工具455-2368-ND，它们可以用于这两个联系人。
在连接器455-2151-ND上，我们对触点的最佳配置是20-24awg，并且只是插座触点。
它是部件号455-2051-1-ND。
如果需要，压接工具是455-2046-ND。
如果您需要标题，它将随附其中的联系人。
我希望这能够帮到你。
如果您有任何疑问，请告诉我。
谢谢，
保罗·伯梅斯特



以下为原文

Hello Joe,
We do carry the contacts for the 6 position connector 455-2352-ND. The Socket Contact for the 12awg wire is 455-2377-1-ND . The Pin contact for 12awg is 455-2349-1-ND .
If you need it we also have an extraction tool 455-2370-ND and Crimp tool 455-2368-ND that will work for both of those contacts.
On the connector 455-2151-ND the best we have for contacts will be 20-24awg and will be just the socket contact. It is part number 455-2051-1-ND.
The Crimp tool if needed is 455-2046-ND .
If you need the header it will come with the contacts already in it.
I hope this helps you out.
If you have any questions please let me know.
Thanks,
Paul Burmeister

嗨保罗，
完善！
我正在填写采购订单!!
非常感谢你！
我相信我已经定下来了。
问候，
乔



以下为原文

Hi Paul,
Perfect!
I’m filling out a purchase order!!
Thank you very much! I believe I’m all set.
Regards,
Joe