完善资料让更多小伙伴认识你，还能领取20积分哦， 立即完善>
3天内不再提示
德赢Vwin官网
论坛|
嗨，我想保存两个正弦波形，相移来自两个通道。
我必须在两个单独的步骤中保存这两个波形。 我可以在这两个保存的BIN文件中获得保存相移吗？ Senmeis 以上来自于谷歌翻译 以下为原文 Hi, I want to save two sine waveforms with a phase shift coming from two channels. I must save these two waveforms in two separate steps. Can I get the save phase shift in these two saved BIN files? Senmeis 
0
|
|
相关推荐
5个回答
|
|
|
只要从同一触发器捕获两个波形，就会保留相位。
要自己测量相位，您必须编写一个程序来读取两个波形，并计算相位。 你为什么不用范围来衡量阶段？ 免责声明：为了获得更可靠的响应，您应该考虑致电当地的Keysight技术呼叫中心。 Keysight论坛在“可用”的基础上进行监控，并不一定是解决技术问题的最快方式。 以上来自于谷歌翻译 以下为原文 As long as the two waveforms were captured from the same trigger, the phase will be preserved. To measure the phase yourself, you will have to write a program to read the two waveforms, and calculate the phase. Why don't you just use the scope to measure the phase? Al Disclaimer: For more reliable response, you should consider calling your local Keysight Technical Call Center. The Keysight Forums are monitored on an "as available" basis, and aren't necessarily the fastest way to get technical questions answered. |
|
|
|
|
nvywyerwer 发表于 2018-10-23 16:56 我只需要原始sata进行进一步分析。 我可以通过两种方式保存数据：1：暂停测量 - >“屏幕数据”选项 - >将数据保存到两个文件中2：运行测量 - >“屏幕数据”选项 - >将数据保存为两个 文件这两种方式的相移是否相同？ Senmeis 以上来自于谷歌翻译 以下为原文 I just need the raw sata for further analysis. I can save the data in two ways: 1: pause the measurement -> „On-screen Data“ option -> save data into two files 2: run the measurement -> „On-screen Data“ option -> save data into two files Are the phase shifts in these two ways the same? Senmeis |
|
|
|
|
xj5548 发表于 2018-10-23 17:02 您是要保存示波器所做的测量，还是保存文件，以便进行测量？ 它们是非常不同的东西。 免责声明：为了获得更可靠的响应，您应该考虑致电当地的Keysight技术呼叫中心。 Keysight论坛在“可用”的基础上进行监控，并不一定是解决技术问题的最快方式。 以上来自于谷歌翻译 以下为原文 Do you want to save the measurement that the scope makes, or save the files, so that you can do the measurement? They are very different things. Al Disclaimer: For more reliable response, you should consider calling your local Keysight Technical Call Center. The Keysight Forums are monitored on an "as available" basis, and aren't necessarily the fastest way to get technical questions answered. |
|
|
|
|
nvywyerwer 发表于 2018-10-23 17:07 我想将测量的波形保存到文件中。 关键问题是在保存与否之前停止测量是否有所不同。 Senmeis 以上来自于谷歌翻译 以下为原文 I want to save the measured waveforms into files. The key question is if it makes difference to stop the measurement before saving or not. Senmeis |
|
|
|
|
|
另外，我不认为将数据捕获为进行测量。 测量相位或峰峰值电压更像是我认为的测量方法。 作为一种形式，您应该在保存数据之前始终停止范围。 如果作用域正在运行，它将停止，保存数据（之前指定的所有通道），然后继续。 停止允许您查看屏幕上的数据，并确定它是否是好数据，或者是否某种异常导致捕获到不良数据。 它还允许您检查是否已告知范围以保存两个通道，并且文件名是正确的。 免责声明：为了获得更可靠的响应，您应该考虑致电当地的Keysight技术呼叫中心。 Keysight论坛在“可用”的基础上进行监控，并不一定是解决技术问题的最快方式。 以上来自于谷歌翻译 以下为原文 As an aside, I don't think of capturing data as making a measurement. Measuring phase, or peak-to-peak voltage, is more what I think of as making a measurement. As a matter of form, you should always stop the scope before you save the data. If the scope is running, it will stop, save the data (all of the channels previously specified), then continue. Stopping allows you to look at the data onscreen, and make a decision as to whether it's good data, or if some sort of anomaly caused bad data to be captured. It also allows you to check that you have told the scope to save both channels, and that the filename is correct. Al Disclaimer: For more reliable response, you should consider calling your local Keysight Technical Call Center. The Keysight Forums are monitored on an "as available" basis, and aren't necessarily the fastest way to get technical questions answered. |
|
|
|
|
只有小组成员才能发言，加入小组>>
1285 浏览 0 评论
2373 浏览 1 评论
2192 浏览 1 评论
2064 浏览 5 评论
2948 浏览 3 评论
1110浏览 1评论
关于Keysight x1149 Boundary Scan Analyzer
753浏览 0评论
N5230C用“CALC:MARK:BWID？”获取Bwid,Cent,Q,Loss失败，请问大佬们怎么解决呀
925浏览 0评论
1287浏览 0评论
/7 
关注我们的微信
下载发烧友APP
德赢Vwin官网 观察
版权所有 © 湖南华秋数字科技有限公司
德赢Vwin官网 （电路图） 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证：合字B2-20210191
工商网监
湘ICP备2023018690号
1582
评论
淘帖
968
