怎么降低流数据速率

嗨，大家好，
事实上，我们正在使用CyPress StuffER从控制中心写入FX3到PC的数据。我们从感测器捕获图像并发送到FX3@ 100MHz频率，并且感测器以4帧/秒的速度捕获帧，当我们从数据写入时，每个帧是（752×480，i，360960）。Stuffer-to文件在写入文件时速度非常快，有些数据丢失了。所以我们想减少流线型的写入速度，我们想解决这个数据丢失或移位问题。我已经把输入的图像附加到FX3和写入文件后的图像。F问题请告诉我。
谢谢，
韦伦德拉
小文件名30.JPG
50.9 K
小文件名32.JPG
33.3 K
151.JPG
13 K



以下为原文
hi every one,
actually we are using cypress streamer to write data from FX3 to Pc in the presense of control center .we are capturing the images from senser and sending to fx3 @ 100Mhz frequency and senser captures the frames at the rate of 4 frames/s each frame is of (752*480 i.e 360960) when we write data from streamer to file it is very fast and some data is missing while wri ting to the file .so we want reduce the streamer writing speed and we want to solve that data missing or shifting issue .i have attached the input image coming to FX3 and image after writing to files .can any one sorted such kind of issues please let me know.




thanks regards ,
veerendra

• smallFileName30.jpg50.9 K
• smallFileName32.jpg33.3 K
• 151.jpg13.0 K