将NMD-2.4mm公连接器连接到普通的2.4mm电缆或适配器的正确步骤是什么？

我想知道，将NMD-2.4mm公连接器（如我的PNA上的端口）连接到普通的2.4mm电缆或适配器的正确步骤是什么？
NMD 2.4mm公连接器应该与普通的2.4mm连接器兼容，我从个人经验中知道你可以将它们连接在一起，这就是为什么它们有内螺纹。
对于NMD 2.4mm，建议的扭矩为12in-lbs，而对于正常的2.4mm，则为8 in-lbs。
似乎扭矩的合适原因是将扭矩扳手放在NMD 2.4mm公连接器连接螺母上并保持2.4mm适配器的静止状态。
我需要一个.750“的特殊扭矩扳手，以便安装在NMD侧和8英寸 - 磅，还是可以使用普通的12英寸 - 磅扳手？



以下为原文

I'm wondering, what is the correct procedure is for connec ting a NMD-2.4mm male connector (like the ports on my PNA have) to a normal 2.4mm cable or adapter?
The NMD 2.4mm male connectors are supposed to be compatible with normal 2.4mm connectors, and I know from personal experience you can connect them together and that is why they have the inner threads. The recommended torque for an NMD 2.4mm is 12in-lbs, and for a normal 2.4mm it is 8 in-lbs. It seems that the proper why to torque is to put the torque wrench on the NMD 2.4mm male connector coupling nut and hold the 2.4mm adapter still. Do I need a special torque wrench that is .750" to fit on the NMD side and 8 in-lbs or can I use the normal 12 in-lbs wrench?