Linux怎么支持N6705B的SCPI命令

嗨，我有一台N6705B直流 电源分析仪，我把这台设备通过USB连接到Linux设备后，从lsu***命令连接到Linux设备，我可以看到设备已找到。
现在我的要求是这样的：1。我喜欢从这个linux设备远程连接到N6705B并发送SCPI命令来操作它。
这背后的意图是我必须在各种情况下自动从N6705B收集/获取数据值，所以我必须从linux设备连接到N6705B（目前我的自动化框架仅支持linux）并且执行
SCPI为此命令。
如果有人对此感谢varun.p有任何想法，请告诉我



以下为原文

Hi

I had an N6705B DC power analyzer, I connected this device via USB to an Linux device after connec ting it to and Linux device from lsu*** command i can see that the device is found.

Now my requirement is like this:

1. I like to remotely connect to the N6705B from this linux device and send SCPI commands to operate it .

The intention behind this is I have to do an automation for collecting/fetching data values from the N6705B under various scenarios, so i have to connect to the N6705B from the linux device(currently my automation framework has support only in linux) and do the SCPI commands for this.

Please let me know if any one has any idea about this

Thanks
varun.p