[问答]

Benchlink 4.3不会使用ICS GPIB扫描到USB

1513 GPIB

问答对人有帮助，内容完整，我也想知道答案 0 我正在运行Windows 7 x64 Professional我有一个ICS GPIB到USB并安装了ICS的488.2V4驱动程序我更新了IO Libraries套件17.019013.0并且有Benchlink 4.3我按照ICS的说明进行了操作，一切都看到了：ICS看到了 GPIB到USB和连接的仪器，IO Libraries套件可以看到GPIB和附带的仪器。 Benchlink看到附件。问题是，当我开始扫描时，它会立即终止。我只是弹出一个说扫描终止。如果我切换RS232连接一切正常。我尝试过卸载并重新安装多次，但似乎没有任何帮助，有没有其他人有这个问题？以上来自于谷歌翻译以下为原文 I am running windows 7 x64 Professional I have a ICS GPIB to USB and have installed it with ICS's 488.2V4 drivers I have updated the IO Libraries suite 17.019013.0 And have Benchlink 4.3 I followed the instructions from ICS and everything is seen: ICS sees the GPIB to USB and the attached instrument, IO Libraries suite sees the GPIB and the attached instrument. Benchlink sees the attached instrument. The issue is when I start the scan it immediately terminates for no reason. I just get a pop up saying the scan terminated. If I switch the RS232 connection everything works fine. I have tried uninstalling and reinstalling multiple times but nothing seems to help, has any one else had this issue? 0
2018-11-7 10:03:08　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × kingnet_52040 该类别下有 195 个回答。邀请回答 60user7 该类别下有 81 个回答。邀请回答蓝色冰汐该类别下有 45 个回答。邀请回答醉狼工作室该类别下有 41 个回答。邀请回答 ianwhoani 该类别下有 30 个回答。邀请回答 dkhwakd 该类别下有 25 个回答。邀请回答 aaabbb567 该类别下有 23 个回答。邀请回答 e08506806 该类别下有 20 个回答。邀请回答 szzjfyp 该类别下有 18 个回答。邀请回答 ningee 该类别下有 16 个回答。邀请回答 sonia87 该类别下有 16 个回答。邀请回答 zouqinxiang 该类别下有 15 个回答。邀请回答 xj5548 该类别下有 15 个回答。邀请回答 derek88 该类别下有 14 个回答。邀请回答 daichuangs 该类别下有 14 个回答。邀请回答 hzmbs2016 该类别下有 12 个回答。邀请回答 JST2006 该类别下有 12 个回答。邀请回答 fichesw 该类别下有 11 个回答。邀请回答 www037 该类别下有 11 个回答。邀请回答 ToGoodSoft 该类别下有 11 个回答。邀请回答举报贾桂林相关推荐 • Benchlink不会停止扫描34970A 3008 • BenchLink Data Logger和34970A扫描时错误 9226 • Benchlink V4.3中的错误？ 870 • Benchlink 1.4与时间标记不兼容 1119 • CH582F如何扫描到我需要的广播？ 519 • 请问Benchlink data logger的最大记录时间是多久 1705 • GPIB扫描无法完成是怎么回事？ 1914 • 扫描到的BLE设备始终不会显示AT+BLEADVDATA 定义的设备名称是哪里出了问题? 197 • Benchlink Data Logger 3将无法运行 11081 • 为什么我会在扫描一段时间后看到此提示弹出 1112 1个回答

答案对人有帮助，有参考价值 0 我之前没有见过这个问题，如果你创建一个IO监视器日志，我可能能够找出问题所在。如果打开连接专家/ IO库并选择仪器，则在右侧会显示一个“启动IO监视器”链接。点击它，一旦IO监视器打开，转到工具/选项，确保Visa COM，Keysight Visa和SICL都经过检查标记。然后按下播放按钮启动IO监视器，然后打开并运行Benchlink Datalogger。完成数据记录器后，返回IO监视器，点击停止，然后保存文件并上传，这样我就可以看看发生了什么。以上来自于谷歌翻译以下为原文 I haven't seen this issue before, if you create an IO monitor log, I may be able to figure out the problem. If you open up Connection expert/IO libraries and have your instrument selected, on the right hand side there is a link that says Start IO Monitor. Click on that, once IO monitor opens go to tools/options make sure Visa COM, Keysight Visa, and SICL are all check marked. Then start IO monitor by hitting the play button, then open up and run Benchlink Datalogger. Once finished with datalogger, go back to IO monitor, hit stop, then save the file and upload it so I can have a look at what's happening.

2018-11-7 10:09:56 评论举报杨梅