G753 - High Accuracy Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
G788 - ±1°C Remote and Local Temperature Sensor with SMBus Serial Interface
G524 - Power Distribu
tion Switch
G527 - Programmable Current Limited Load Switch
G5330A - High Efficiency 10A Synchronous Buck Converter for 5V System Power
G5332A - High Efficiency 8A Synchronous Buck Converter
G5335/A - High Efficiency 10/6A Synchronous Buck Converter
G5719C - 1MHz, 3A Synchronous Step-Down Regulator
G5016 - Dual Ultra-Low On-Resistance Load Switch with Controlled Turn-On
M5938 - Very Ultra-Low On-Resistance Load Switch
G2985 - DDR Termination Regulator DDR1/2/3/3L, LPDDR3/4
G753T11U :
general description
The G753 is a temperature sensor, analog-to-digital
converter, and digital over- temperature detector with
SMBus interface. The host can query the G753 at any
time to read temperature. The open-drain ALERT#
output becomes active when the temperature exceeds
a programmable limit which initialed by hardware
power-on setting. This pin can operate in either
“Comparator” or “Interrupt” mode.
Applications
System Thermal Management
Personal Computers
Office Electronics
Electronic Test Equipment
general description
general descriptionFeatures
SMBus interface
Hardware Power-on Setting & Programmable
over temperature limit
Separate open-drain output pin operates as
interrupt or comparator at output
Register readback capability
Power up defaults permit stand-alone operation
as thermostat
Shutdown mode to minimize power consumption
Key Specifications
Supply Voltage 3.0V to 3.6V
Supply Current operating 110µA (typ)
130µA (max)
shutdown 1µA (max)
Temperature Accuracy
-10°C to 80°C ±1°C (max)
-55°C to 125°C ±3°C (max)
深圳市凌晔科技有限公司
广东省深圳市福田区华强广场C座13L
Tel:0755-83660559
qq:869030400
E-mail:869030400@qq.com
0