在Linux中编译SDSoC中的硬件功能时出现问题

你好，
我在Linux Mint 18.2 Sonya中安装了没有重大问题的SDSoC。
我将一个在Windows中工作的C文件复制到Linux，创建了一个SDx项目，添加了文件，构建它没有任何硬件功能，而且工作正常。
当我选择在结构中运行一个函数时出现问题。
然后我收到了这个错误：
执行MMC_circuit的加速器源lin ting
信息：[Linting 83-3001] MMC_circuit
信息：[Linting 83-3001] MMC_circuit
执行pragma生成
信息：[PragmaGen 83-3231]成功生成了tcl脚本：/home/sdf/Documentos/Xilinx/HVDC_MMC/Debug/_sds/vhls/MMC_circuit.tcl
将功能MMC_circuit移动到可编程逻辑
错误：[HLS 200-70]发现编译错误：
Pragma处理器失败：/home/sdf/Documentos/Xilinx/HVDC_MMC/src/main.cpp:2:10：致命错误：'stdio.h'文件未找到
＃包括
^
错误：[SdsCompiler 83-5019]退出sds ++：调用'/opt/Xilinx/SDx/2017.1/Vivado_HLS/bin/vivado_hls /home/sdf/Documentos/Xilinx/HVDC_MMC/Debug/_sds/vhls/MMC_circuit_run.tcl'时出错
make：*** [src / main.o]错误1
sds ++日志文件另存为/home/sdf/Documentos/Xilinx/HVDC_MMC/Debug/_sds/reports/sds_main.log
错误：[SdsCompiler 83-5004]构建失败
src / subdir.mk：18：fallo en las instrucciones para el objetivo'src / main.o'
11:50:39建成（耗时4s.792ms）
有谁知道为什么在添加要在 FPGA中运行的函数后找不到stdio.h？
谢谢，
Cerilet



以下为原文

Hello,

I have installed SDSoC without major problems in Linux Mint 18.2 Sonya.

I copied a C file that was working in Windows to Linux, created a SDx project, added the file, build it without any hardware function and it worked.

The problem came when I chose a function to be ran in the fabric. Then I got this error:

Performing accelerator source linting for MMC_circuitINFO: [Linting 83-3001] MMC_circuitINFO: [Linting 83-3001] MMC_circuitPerforming pragma generationINFO: [PragmaGen 83-3231] Successfully generated tcl script: /home/sdf/Documentos/Xilinx/HVDC_MMC/Debug/_sds/vhls/MMC_circuit.tclMoving function MMC_circuit to Programmable LogicERROR: [HLS 200-70] Compilation errors found:Pragma processor failed: /home/sdf/Documentos/Xilinx/HVDC_MMC/src/main.cpp:2:10: fatal error: 'stdio.h' file not found#include ^ERROR: [SdsCompiler 83-5019] Exiting sds++ : Error when calling '/opt/Xilinx/SDx/2017.1/Vivado_HLS/bin/vivado_hls /home/sdf/Documentos/Xilinx/HVDC_MMC/Debug/_sds/vhls/MMC_circuit_run.tcl'make: *** [src/main.o] Error 1sds++ log file saved as /home/sdf/Documentos/Xilinx/HVDC_MMC/Debug/_sds/reports/sds_main.logERROR: [SdsCompiler 83-5004] Build failedsrc/subdir.mk:18: fallo en las instrucciones para el objetivo 'src/main.o'11:50:39 Build Finished (took 4s.792ms)Does anyone know why it cannot find stdio.h after adding a function to be ran in the FPGA?

Thanks,

Cerilet

0