Windows 10 Pro中的vivado 2016.4安装停留在最终处理中

你好@ wessamafifi
当您在计算机上安装了2013或更高版本的Microsoft Visual C ++ Redistributables时，我已经看到了这个问题。
打开控制面板，看看您是否有更高版本。
如果是，请卸载它们。
谢谢，
维奈
--------------------------------------------------
------------------------------------------您是否尝试在Google中输入问题？
？
如果没有，你应该在发布之前。
此外，MARK这是一个答案，以防它有助于解决您的查询/问题。给予帮助您找到解决方案的帖子。
在原帖中查看解决方案



以下为原文

Hi @wessamafifi

I have seen this issue when you have 2013 or later versions of Microsoft Visual C++ Redistributables installed on the machine.
Open Control Panel and see if you have later versions. If yes, uninstall them.

Thanks,
Vinay
--------------------------------------------------------------------------------------------
Have you tried typing your question in Google? If not you should before posting. Also, MARK this is as an answer in case it helped resolve your query/issue.Give kudos to the post that helped you to find the solution.View solution in original post

你好@ wessamafifi
这是我从日志文件中看到的错误消息：
您可以从Xilinx安装位置安装此软件包。
导航到C： Xilinx Vivado 2016.4 tps win64并使用管理员权限运行xvcredist.exe。
谢谢，
维奈
--------------------------------------------------
------------------------------------------您是否尝试在Google中输入问题？
？
如果没有，你应该在发布之前。
此外，MARK这是一个答案，以防它有助于解决您的查询/问题。给予帮助您找到解决方案的帖子。



以下为原文

Hi @wessamafifi

Here is the error message I see from the log file:

You can install this package from Xilinx Installation location.
Navigate to C:XilinxVivado2016.4tpswin64 and run xvcredist.exe with admin privileges.

Thanks,
Vinay
--------------------------------------------------------------------------------------------
Have you tried typing your question in Google? If not you should before posting. Also, MARK this is as an answer in case it helped resolve your query/issue.Give kudos to the post that helped you to find the solution.

谢谢您的回复。
我之前试过这个。
它要我修理（请参见下图）。
我做到了，它说“设置成功”。
每当我尝试打开任何相关程序时（例如，Vivado 2016.4，Vivado HLS 2016.4）。
它向我显示了下面关于Microsoft visual的相同消息。
谢谢
最好的祝福，
Wessam



以下为原文

Thank you for your reply. I tried this before. It asked me for repair (please see figure below). I did that and it says "setup successful". Whenever I tried to open any related program (e.g., Vivado 2016.4, Vivado HLS 2016.4). It shows me the same message below about Microsoft visual.

Thanks
Best regards,
Wessam

你好@ wessamafifi
当您在计算机上安装了2013或更高版本的Microsoft Visual C ++ Redistributables时，我已经看到了这个问题。
打开控制面板，看看您是否有更高版本。
如果是，请卸载它们。
谢谢，
维奈
--------------------------------------------------
------------------------------------------您是否尝试在Google中输入问题？
？
如果没有，你应该在发布之前。
此外，MARK这是一个答案，以防它有助于解决您的查询/问题。给予帮助您找到解决方案的帖子。



以下为原文

Hi @wessamafifi

I have seen this issue when you have 2013 or later versions of Microsoft Visual C++ Redistributables installed on the machine.
Open Control Panel and see if you have later versions. If yes, uninstall them.

Thanks,
Vinay
--------------------------------------------------------------------------------------------
Have you tried typing your question in Google? If not you should before posting. Also, MARK this is as an answer in case it helped resolve your query/issue.Give kudos to the post that helped you to find the solution.

谢谢。
问题解决了。
最好的祝福，
Wessam



以下为原文

Thanks. The problem was solved.

Best regards,
Wessam

vuppala写道：
你好@ wessamafifi
当您在计算机上安装了2013或更高版本的Microsoft Visual C ++ Redistributables时，我已经看到了这个问题。
打开控制面板，看看您是否有更高版本。
如果是，请卸载它们。
谢谢，
维奈
我正在尝试为Design Edition生成许可证文件。
我有一个SDSoC节点锁定凭证我试图在Windows 10（家庭版）上激活
我是否应该将此表示2013年之后的任何版本（即2014,2015,2016 ..）应该卸载，因此需要使用旧版本（即2010年）？
或者应该卸载任何早于2013的Visual C ++版本。
对不起，这感觉应该是显而易见的，但术语“更高版本”可能意味着不同的东西取决于上下文。
谢谢



以下为原文

vuppala wrote:
Hi @wessamafifi

I have seen this issue when you have 2013 or later versions of Microsoft Visual C++ Redistributables installed on the machine.
Open Control Panel and see if you have later versions. If yes, uninstall them.

Thanks,
Vinay

I'm trying to generate a License File for Design Edition. I have a SDSoC node-locked voucher I'm trying to activate on Windows 10(Home Edition)

Should I take this to mean any version after 2013 (i.e. 2014,2015,2016..) should be uninstalled and therefor need to use an older version (i.e. 2010)? Or any version of Visual C++ older than 2013 should be uninstalled.

Sorry, this feels like it should be obvious but the term "later versions" could mean different things depending on context.

Thanks

嗨，
尝试在Windows 10 Home Edition上安装Vivado HLx 2017.1时遇到了同样的问题。
正如解决方案中所指出的，我去了控制面板并卸载了版本2013及更高版本的所有Microsoft Visual C ++ Redistributables。
但是，执行此步骤后，安装程序仍处于同一状态。
你能帮我解决一下吗？
谢谢，
Venky



以下为原文

Hi,

I faced the same issue while trying to install Vivado HLx 2017.1 on Windows 10 Home edition. As pointed out in the solution, I went to control panel and uninstalled all Microsoft Visual C++ Redistributables of version 2013 and later.

However, after doing this step, the installer is still hanged at the same state.

Can you please help me fix it?

Thanks,
Venky

喜
我有同样的问题。
安装停留在最终处理中：启动配置管理器以关联......我正在尝试安装vivado2017.1。
我有Windows 10专业版。
我查看过：http：//www.xilinx.com/support/answers/69076.html但这些建议都不适合我的情况。
我尝试了以下内容
手动运行vcredist可执行文件。
已经安装了vcredist dll。
试图直接运行vivado.bat。
同样的错误
请帮我解决这个问题。
提前致谢



以下为原文

hi,

I'm having the same issue. The installing is stuck in final processing: Launch configuration manager to associate...I'm trying to install vivado 2017.1. I have windows 10 pro. I have looked at https://www.xilinx.com/support/answers/69076.html but none of the suggestions worked in my case. I have tried the following

• manually ran the vcredist executable.
  
• vcredist dlls have already been installed.
  
• tried to Run vivado.bat directly. same error
  

Please help me solve this problem. thanks in advance

你好@ atharbaig，
你可以分享/附上安装日志文件（C： Xilinx .xinstall Vivado_2017.x xinstall.log）进行检查吗？
请检查您的服务设置，确保“服务器”状态为“已启动”或“正在运行”。
有关此问题的更多信息，请访问：https：//www.xilinx.com/support/answers/70194.html
您还可以尝试通过设置此环境变量来绕过vcredist检查：
XIL_PA_NO_REDIST_CHECK = 1
...然后看看你是否仍然看到相同的行为？
谢谢
亲切的问候，
阿纳托利
亲切的问候，Anatoli Curran，Xilinx技术支持-----------------------------------------
--------------------------------不要忘记回复，工作，并接受解决方案.----
--------------------------------------------------
-------------------



以下为原文

Hello @atharbaig,

Can you please share/attache the installation log file (C:Xilinx.xinstallVivado_2017.xxinstall.log) for examination?

Please check your Services settings and ensure that the 'Server' status is Started or Running. For more info regarding this, please check here: https://www.xilinx.com/support/answers/70194.html

Can you also please try bypassing the vcredist check with/by setting this environment variable:
XIL_PA_NO_REDIST_CHECK = 1

….and then see if you still seeing the same behavior or not? Thanks

Kind Regards,
Anatoli
Kind Regards,
Anatoli Curran,
Xilinx Technical Support
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------