Benchlink 1.4与时间标记不兼容

您好，我不知道还有其他人发布这个，所以我在这里做。
我对Benchlink软件有几个问题。
在我们的实验室中，我们仍然使用Benchlink 1.4作为Benchlink-3 4.3的最爱。
为什么，因为它更易读，线条更清晰，时间标记更好，另外几件事。
我也遇到了新软件和Agilent 34970A设备与USB2RS232接口相结合的问题。
它在Windows 7中仍然运行良好。最新的Benchlink与时间标记不兼容，每次单击标记时，您必须再次将其调整为所需的时间（令人沮丧）。
在Benchlink 1.4中，您可以设置一次，然后只需单击所有通道进行检查，标记就会保留在时间位置设置上。
新的Benchlink可能有一些优势，但是，即使单独出现标记问题，我们也不会使用新的Benchlink，除非该软件具有与Benchlink 1.4完全相同的可能性。
我们将新版本视为退一步。
现在最大的问题是，我们无法在Windows 8上安装Benchlink 1.4（来自原始cd）（即使不是兼容模式），尽管它在Windows 7上运行得非常好。
有没有人有这方面的解决方案，所以我们能够在Windows 8上安装它？
如果没有，那么我们将不得不重新安装Windows 7。
感谢您的帮助！编辑：Jerry003于2014年4月7日上午6:50



以下为原文

Hello,

i don't know were else to post this so i do it here.
I have a few ques tions about the Benchlink software.
In our lab we still use Benchlink 1.4 in favorite of Benchlink-3 4.3.
Why, because it is better readable, the lines are sharper, the time markers work better and another few things. I also encounter problems with the new software and our Agilent 34970A devices in combination with USB2RS232 interfaces.
It still works good in Windows 7.
The latest Benchlink doesn't work well with the time markers, every time you click a marker you have to adjust it again to the elapsed time you need(frustrating). In Benchlink 1.4 you can set it once and then just simply click all the channels to check and the markers stay on the time position set.
The new Benchlink may have some advantages but, but even alone on the marker issue, we are not going to use the new Benchlink, unless the software will have exactly the same possibilities as Benchlink 1.4. We see the new version more as a step back.
The biggest issue now is, we can't install Benchlink 1.4 (from original cd) on windows 8 (even not in compatibilty mode), alltough it does work on Windows 7 very well.

Does anyone have a fix for this, so we are able to install it on Windows 8? if not then we will have to put Windows 7 back on it.

Thanks for your help!

Edited by: Jerry003 on Apr 7, 2014 6:50 AM