怎么从E4443A读取数据到PC

嗨 - 请附上一个示例，使用我们今天开始研究的C＃从MXA读取跟踪数据，以演示C＃中用于轮询仪器和读回binblock数据的一些基本概念。
我们将更多地研究这个例子并将其发布到SA示例页面：www.agilent.com/find/sa_programming。
请注意PSA不支持hislip，因此您将使用VXI11.3并通过LAN打开连接，如“TCPIP0 :: 192.168.1.2 :: inst0 :: INSTR”您也可以使用VEE或C ++或MATLAB或LABVIEW
我们在www.agilent.com/find/sa_programming上发布了其他示例您还可以使用BenchVue问候从仪器中获取跟踪数据 -



以下为原文

Hi -

Please find attached an example for reading trace data from an MXA using C# that we started working on today to demonstrate some basic concepts in C# for polling an instrument and reading back binblock data. We will work on this example more and post it to the SA examples page at: www.agilent.com/find/sa_programming. Please note that PSA doesn’t support hislip, so you would use VXI11.3 and would open the connection via LAN as “TCPIP0::192.168.1.2::inst0::INSTR”

You could also use VEE or C++ or MATLAB or LABVIEW or VB6 or VB#, etc. We have other examples posted to www.agilent.com/find/sa_programming

You could also get trace data out of the instrument using BenchVue

Regards -

感谢BenchVue的先生，我可以长时间记录数据，如24小时的数据？
如果是这样，那将更容易做到



以下为原文

thanks sir

for BenchVue, can i record a data for long time like 24 hrs of data ??


if it does , it will be much easier to do

嗨 - 我们的开发团队正在考虑8月即将发布的BenchVue版本的数据记录。
让我们更多地了解您的应用程序以及您对所返回数据的要求，我们将把它反馈给我们的开发团队。
有关您希望如何格式化数据以及您正在进行哪些测量的任何信息都会有所帮助。
谢谢 -



以下为原文

Hi -

Our development team is considering data logging for the upcoming BenchVue release in August.

Let us know more about your application and what you want for the data returned, and we’ll feed that back to our development team.

Any information on how you want the data formatted and what measurement you are making will be helpful.

Thanks -

谢谢你的回复，我检查了benchview，似乎用频谱它唯一的捕获单个图像只有不长的数据。
我们的项目类似于陀螺仪，我们正在构建改进的系统，但我们现在想要进行近24小时的测量，因为我们想要在提取噪声后提取噪声并读取实际数据。
我知道你说有我可以使用的示例代码，但遗憾的是我根本不知道如何使用它们。
谢谢，祝你有美好的一天



以下为原文

thanks for the reply ,

i check benchview , it seems that with spectrum its only capture single image only not long data .


our project is something similar to gyroscope and we are building improved system but we now want to do some measurement for almost 24hrs because we want to extract the noise and read the actual data after extract the noise.


i know you said that there is sample codes that i can use but sadly i have no idea in how to use them at all .


thanks and have great day