怎么通过BLE通知发送int16数组

很抱歉在我还有一个问题的时候打开一个新的问题（“我炸了我的OP AMPS吗？”）但我必须在相当短的时间内找出很多事情。
我想通过通知从我的PSoC设备向GATT客户端发送三个It16值数组。最终，我希望在GATT DB中更新这些值，用于客户端读取，但我只是尝试让通知工作。
到目前为止，我所看到的所有示例只在通知上发送了一个U tiT8值（虽然我已经看到一些代码将UTI8数组写入GATT DB），但是当我试图修改这些以与我的It16数组一起工作时，我总是得到以下警告：
从“It16（*）[ 3 ] ]分配给“Unt8*”（AKA“无符号char *”）的不兼容指针类型
我翻遍了BLE生成的代码和API文档，但是我还没有找到这个问题的解决方案。我敢肯定，这跟我不了解指针（*），地址（&；）、处理等。我想我是设置在BLE组件的自定义特性窗口的数据的类型，但我现在明白我只是改变“新字段的数据格式。”
我真的没有一个足够完整的后没有项目，但这是一段代码，我得到上面的警告。任何想法如何完成我所要做的将是最有帮助的。
谢谢，
唐
CyBLY-GATSH-HANDLYVALIONE.NTFFETT通知句柄；
如果（权重通知和0x01）{
//用新数据更新通知
NoTrimeActual.AtHuffRe= WebSythCARAL句柄；
NoTimeCaldLe.ValueVal=和权重数组；
NoTrimeChanel.ValueLe= Weethsl CalasDATAYLLN；
/ /报告数据的组件通过通知发送数据
cyble_gattsnotification（cyble_connhandle，&；notificationhandle）；
}



以下为原文
Sorry to open a new question while I still have one open ("Did I Fry my Op Amps?"), but I have to figure out quite a few things in a relatively short period of time.

I want to send an array of three int16 values from my PSoC device to a GATT client via a notification. I will eventually want to update these values in the GATT DB too, for client reads, but I'm just trying to get the notifications working for now.

All the examples I've seen so far only send a single uint8 value over notifications (although I have seen some code for writing a uint8 array to the GATT DB), but when I try to modify these to work with my int16 array, I always get the following warning:

incompatible pointer types assigning to 'uint8*' (aka 'unsigned char *') from 'int16 (*)[3]'

I've dug around in the BLE generated code and API docs, but I haven't yet found the solution to this issue. I'm pretty sure it has to do with my poor understanding of pointers (*), addresses (&), handles and so forth. I thought I was setting the type of data in the custom characteristic window of the BLE component, but I now see that I was only changing the data format of "New field."

I don't really have a project complete enough to post yet, but here is a snippet of code where I am getting the above warning. Any thoughts on how to accomplish what I am trying to do would be most helpful.

Thanks,
Don


CYBLE_GATTS_HANDLE_VALUE_NTF_T notificationHandle;

if (weightsNotification & 0x01) {

// update notification with new data
notificationHandle.attrHandle = WEIGHTS_CHAR_HANDLE;
notificationHandle.value.val = &weightsArray;
notificationHandle.value.len = WEIGHTS_CHAR_DATA_LEN;

// Report data to BLE component for sending data by notifications
CyBle_GattsNotification(cyBle_connHandle, ¬ificationHandle);
}