Psoc3 Capsense Tunner I2C连接无法传输数据

嗯，一定是错的，如果我们不想什么，最好是上传你的完整的项目，这使我们大家都可以看看。使用造物主的功能”创建工作捆绑”并上传生成的归档文件在这里。
鲍勃



以下为原文
Well, something must be wrong and if we are not trying to guess what, best would be to upload your complete project here so that we all can have a look at. Use Creator's function "Create Workspace Bundle" and upload the resulting archive-file here.

Bob

谢谢你的回复。我是PSOC3的CasSeple的初学者。我已经设计了四个按钮的CasSoC和线性滑块的CAPSENSE。我使用MixPrime3作为T2OB转换的I2C桥，并且我已经成功地连接了MyPrim3和我设计的PCB布局，但是它不能传输数据。附件中的具体设计。非常感谢！
PSOC3-CAPENSEX.ZIP
2.6兆字节



以下为原文
Thanks for your reply . I am the beginner of Psoc3's Capsense . I have designed four buttons of Capsense and linear sliders of Capsense . I use MiniProg3 as I2C bridge in order to USB conversion ,and I have successfully connected MiniProg3 and the PCB layout which I have designed, but it can not transfer data . Specific design in Annex . thank you very much !

• Psoc3-capsense.zip2.6 MB
  
  

我还没有使用调谐器，但请记住：它只是一个调谐器，以适应参数为您的CAPSENSE按钮和滑块。
使用调谐器的程序看起来与我在文档中发现的完全不同，看看这个线程，有一个CasSoq调谐器的例子：HTTP://wwwyCysP.com／？APP =论坛和ID ID＝2232和；RID＝53237
另外，我建议您更新您的（以及示例项目）！）到Creator的用户模块的最新版本，到目前为止已经发生了变化。
快乐编码
鲍勃



以下为原文
I did not use the tuner yet, but remember: it is just a tuner to adapt the parameters for your capsense buttons and sliders.
The program to use the tuner looks quite different from what I've found in the docs, have a look at this thread, there is a capsense tuner example: http://www.cypress.com/?app=forum&id=2232&rID=53237
Additionally I would suggest you to update your (and the example project!!) to the latest version of Creator's usermodules, there have been changes made so far.

Happy coding
Bob

非常感谢你的建议，我会再试一次。如果我仍然有问题，我不得不麻烦你帮我回答。非常感谢。祝你有美好的一天！



以下为原文
Thanks very much for your suggestions，I would try again . If I still have problems,I have to trouble you to help me answer.Thanks very much.Have a good day !

欢迎您再来！
鲍勃



以下为原文
You are always welcome!

Bob