使用带有81960A TLS的Labview包装器文件产生错误

嗨Joanne，如果唯一的问题似乎是解决81960A，那么可能需要更新版本的816x PnP驱动程序。
引入版本4.4.1以识别新的81960A激光器。
与此同时，还有一个版本4.4.2，其中一个是好的。
你可以在这里找到它：[http://www.home.agilent.com/agilent/software.jspx?ckey=112417&lc=eng&cc=US&nid=-536900319.0.00&id=112417]那应该
与其他型号相比，使用此激光驱动器的唯一区别。
如果您认为已经安装了此设备，那么如果之前使用过此系列设备的计算机，您可以确认硬盘驱动器上仍然没有旧版本的驱动程序。
该文件名为hp816x_32.dll，通常位于如下目录中：C： Program Files（x86） IVI Foundation VISA WinNT Bin但是如果程序可以找到的其他文件夹中存在较旧的副本，那么
过去曾造成问题。
您是否尝试使用安捷伦功率计协调激光以进行扫描波长光谱测量？
在这种情况下，您也可以使用N7700A IL引擎开始，这是一个免费的GUI程序，也使用816x驱动程序。
[www.agilent.com/find/n7700]最好的问候，迈克



以下为原文

Hi Joanne,
If the only issue seems to be addressing the 81960A, then maybe a newer version of the 816x PnP driver is needed. The version 4.4.1 was introduced to recognize the new 81960A laser. In the meantime there is also a version 4.4.2 and either one is fine.
You can get it here:
[http://www.home.agilent.com/agilent/software.jspx?ckey=112417&lc=eng&cc=US&nid=-536900319.0.00&id=112417]
That should be the only difference between using the driver with this laser compared to other models.

If you think you already have this installed, then if the computer has been used before with this line of equipment you could confirm that no older version of the driver is still on the hard drive. The file is named hp816x_32.dll and is usually located in a directory like this:
C:Program Files (x86)IVI FoundationVISAWinNTBin
But if older copies are present in other folders that the program can find, that has caused problems in the past.

Are you trying to coordinate the laser with an Agilent power meter to make swept-wavelength spectral measurements? In that case you could also start by using the N7700A IL engine which is a free GUI program that also uses the 816x driver.
[www.agilent.com/find/n7700]

Best regards,
Mike

嗨，迈克，非常感谢您的回复。
我有最新版本 - 4.4.2。
但是，我的安装光盘上有4.4.1，所以在发现新版本之前，我正在玩这个。
我将尝试删除与先前版本相关的所有内容，然后重新开始。
在相关的说明中，CD上的I / O套件版本为16.1，我在您的网站上看到它现在高达16.3。
这会引起问题吗？
不，我没有使用安捷伦功率计。
我有一个用于表征光纤光栅的自定义设置 - 它不进行波长扫描，而是逐步通过波长（以用户定义的间隔），并使用高动态范围光谱分析仪比较两个信号的功率。
无论如何，我会尝试你的建议，希望会有更多的成功！
再次感谢，乔安妮



以下为原文

Hi Mike,

Thanks very much for your reply.
I do have the latest version - 4.4.2. However, it was 4.4.1 that came on my install CD so I was playing around with that before discovering the newer version. I will try deleting everything related to the previous version and start again.

On a related note, the version of the I/O suite that came on the CD is 16.1 and I saw on your website that it is now up to 16.3. Will this also cause problems?

No I'm not using an Agilent power meter. I have a custom set-up for characterising fibre gratings - it doesn't do a wavelength sweep, but rather steps through wavelength (at user-defined intervals) and compares the power of two signals using a high dynamic range optical spectrum analyser.

Anyway, I will try what you sugget and hopefully will have more success!

Thanks again,
Joanne

嗨再次迈克，删除DLL似乎已经修复了一切！
非常感谢您的帮助 - 谢谢！
亲切的问候，乔安妮



以下为原文

Hi again Mike,

Deleting the DLL seems to have fixed everything!
Your help is much appreciated - thank you!

Kind regards,
Joanne