频谱E4443A如何连接到MATLAB程序

如何尝试打开套接字并手动发出命令：http：//www.mathworks.com/help/instrument/tcpip.html



以下为原文

How about trying to open a socket and issuing the commands manually:

http://www.mathworks.com/help/instrument/tcpip.html

感谢您的回复，我会尝试它但是安捷伦提供的驱动程序可以下载并安装到matlab程序，它可以自动读取设备。
像BenchView和许多其他程序



以下为原文

thanks for the respond

i will try it but does agilent provide a driver that can be download and installed to matlab program which it can read the device automatically.

like BenchView and many other program

我不知道有哪些驱动程序可用，但是当使用SCPI进行通信时，您可以直接从仪器中读取。
您可能需要参考“程序员指南”以获取SCPI命令列表。
任何socket通信方法都应该有效;
您将需要仪器以太网IP地址并使用端口号5025.例如，在Linux计算机上，如果我向E4445A（类似于您的仪器）发送“：TRACE？TRACE1”查询，则测量数据将作为文本返回
逗号分开。
这可以直接绘制。
我没有和我的乐器在同一网络上使用Matlab，但Mathworks展示了如何通过SCPI读/写：http：//www.mathworks.com/help/instrument/writing-and-reading-data-1.html
安捷伦文档：http：//www.home.agilent.com/agilent/techSupport.jspx？pid = 1000004298：epsg：pro＆amp; pageMode = MN＆amp; pl = eng＆amp; cc = CA程序员指南（第1卷）http：/
/cp.literature.agilent.com/litweb/pdf/E4440-90607.pdf第262页有“TRACE？”
我使用的示例中的语法第279页讨论了SCPI基础知识



以下为原文

I don't know what drivers are available, but when using SCPI to communicate you can read directly from the instrument. You may need to refer to your Programmers Guide for the list of SCPI commands. Any socket communication method should work; you will need your instrument Ethernet IP address and use port number 5025.

For example, on a Linux computer if I send a query ":TRACE? TRACE1" to an E4445A (similar to your instrument), the measurement data is returned as text and comma separated. This can be plotted directly.

I don't have Matlab on the same network as my instruments, but Mathworks shows how to read/write via SCPI:
http://www.mathworks.com/help/instrument/writing-and-reading-data-1.html

Agilent documents here:
http://www.home.agilent.com/agilent/techSupport.jspx?pid=1000004298:epsg:pro&pageMode=MN&lc=eng&cc=CA

Programmer's guide (Vol 1)
http://cp.literature.agilent.com/litweb/pdf/E4440-90607.pdf
page 262 has the "TRACE?" syntax in the example I used
page 279 talks about SCPI basics

嗨 - 这是安捷伦的输入......我们确实有一个简单的驱动程序，用于从PSA获取IQ数据。
该驱动程序发布在：http：//www.home.agilent.com/agilent/editorial.jspx？cc = US＆amp; cs = eng＆amp; ckey = 897981＆amp; nid = -11143.0.00＆amp; id = 897981我们也有一些
MATLAB示例：www.agilent.com/find/sa_programming问候 -



以下为原文

Hi -

Here is Agilent's input...

We do have a simple driver for getting IQ data out of PSA. The driver is posted at:
http://www.home.agilent.com/agilent/editorial.jspx?cc=US&lc=eng&ckey=897981&nid=-11143.0.00&id=897981

We also have some MATLAB examples here:
www.agilent.com/find/sa_programming

Regards -