1
完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
嘿,我在Windows 8上使用带有34405A数字万用表的BenchVue,我遇到了问题。
每当我开始录音时,一切都会顺利进行(几秒钟或几分钟),直到最后DMM大声发出几声嘟嘟声,然后给出一条错误信息,说明“查询中断”,然后录音就会停止。 最初我认为它是固件,所以我更新了一点,效果不大。 在线查看文献,似乎发生此错误是因为设备尝试在完全接收前一个数据包之前将数据包发送到计算机。 为了缓解这种情况,我将采样间隔更改为1秒,这是我测试的最长可接受间隔。 这有不同的结果,但最终在我的录音中大约10分钟再次中断。 我现在以1.25秒的间隔运行,现在进行采样,它已经好几次没有停止我的测试。 有什么我可以采取不同的措施来阻止这种错误发生吗? 谢谢 以上来自于谷歌翻译 以下为原文 Hey, I'm using BenchVue on Windows 8 with a 34405A DMM and I'm having an issue. Whenever I start recordings, everything will be going smoothly (for seconds or minutes) until eventually the DMM beeps loudly a few times and then gives me an error message to the effect of "Query INTERRUPTED" and then recordings will stop. Initially I thought it was firmware so I updated that to little effect. Looking at the literature online, it seems like this error occurs because the device tries to send a data packet to the computer before the previous one is fully received. In order to mitigate this, I changed the sample interval to 1 sec, which is the longest acceptable interval for my testing. This had mixed results but eventually around 10 minutes in my recordings were interrupted yet again. I'm currently running at 1.25 s intervals for sampling now and it has beeped several times without stopping my test. Is there anything I could be doing differently to stop this error from happening? Thanks |
|
相关推荐
1个回答
|
|
|
|
|
|
只有小组成员才能发言,加入小组>>
1283 浏览 0 评论
2371 浏览 1 评论
2189 浏览 1 评论
2062 浏览 5 评论
2946 浏览 3 评论
1103浏览 1评论
关于Keysight x1149 Boundary Scan Analyzer
750浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
921浏览 0评论
1283浏览 0评论
小黑屋| 手机版| Archiver| 德赢Vwin官网 ( 湘ICP备2023018690号 )
GMT+8, 2024-12-22 16:36 , Processed in 1.350003 second(s), Total 77, Slave 61 queries .
Powered by 德赢Vwin官网 网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
德赢Vwin官网 观察
版权所有 © 湖南华秋数字科技有限公司
德赢Vwin官网 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号