你好。
我在网上和puwer供应的手册中搜索,但我没有找到如何在NI
labview中实现它的说明。
有人可以帮我做吗?
我需要控制电压(根据仪器的温度波来上下)。
我使用了此消息中附带的Vi。
手动,
电源工作:如果我设置2V它给出2V使用GPIB控制,如果我设置2V我在程序中读取2V但电源给出0V!
如何解决这个问题?
谢谢你们
以上来自于谷歌翻译
以下为原文
Hi.
I searched in the web and in the manual of the puwer supply but i haven't found istruc
tions how to implement it into NI Labview.
Anyone could help me do it?
I need to control voltage (up and down in function of the temperature wave of an instrument).
I used the Vi attached in this message.
Manually, the power supply works: if i set 2V it gives 2V
With the GPIB control, if i set 2V i read 2V in the program but the power supply gives 0V!
How to fix this?
Thank you all
附件
0