PSoC 3编程连接/引脚

大家好，
我正在使用PSoC 3芯片制作一个板。
我用CY8CKIT-030的示意图作为参考。在这种设计中，有一个10针头。我的问题如下：
1）芯片的编程和调试所需的连接是什么？在参考示意图中，它们具有：
P10-SWDIO
P11—SWDCK
P13- SWO
P14-TDI
这些似乎是JTAG。我虽然MiMig 3可以做SWV/SWD，只需要2针？请澄清。
2）我可以在哪里找到女首长上场？我看了DigiKy，它们似乎已经脱销了。
3）如果我选择不使用USB插针，我该怎么办？
谢谢，
亚历克斯



以下为原文
Hello All,
I am in the process of making a board using the PSoC 3 chip.
I was using the schema tics of the CY8CKIT-030 as a reference. In that design, there is a 10 pin header. My questions are as follows:
1) What are the connections needed for the chip to program & debug? In the reference schematic, they have:
p10 - SWDIO
p11 - SWDCK
p13 - SWO
p14 - TDI
These seem to be JTAG. I though miniprog 3 could do SWV/SWD which only required 2 pins? Please clarify.
2) Where can I find the female header to put on the board? I looked at Digikey, and they seem to be out of stock.
3) What should I do with the USB pins if I choose not to use them?
Thanks,
Alex