1
完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
扫一扫,分享给好友
我正在尝试开始使用IFN003V1板。
我是STMicro软件工具和评估板的新手。 我找不到MC库的V3.0,所以我安装了V3.2。我没有找到IFN003V1项目,因此我尝试将IFN003V1贴片应用于3.2 MC库。修补程序详细信息报告“无需修补”。 我随后找到了MC库V3.0的链接,所以我卸载了V3.2并安装了V3.0。当我试图安装IFN003V1补丁时,我收到错误'无法打开crosscheck.h',我发现crosscheck.h丢失了。然后我忽略了错误并继续修补。修补程序详细信息报告它无法打开其他几个文件,似乎没有修补任何内容。 (该补丁是从V3.0 MC库的安装文件夹运行的。) 我需要做些什么来设置IFN003V1的工作? MC Library V3.2是否已经有针对V3.0的IFN003V1补丁中的更改? 如果没有,那么为了修补V3.0我需要做什么? 如果设置正确,我在哪里可以找到IFN003V1项目? 谢谢你的帮助, 插口 #3.2#ifn003v1#mc-libr-3.0 以上来自于谷歌翻译 以下为原文 I'm attempting to get started with an IFN003V1 board. I am new to STMicro software tools and eval boards. I could not find V3.0 of the MC Library, so I installed V3.2. I didn't find an IFN003V1 project, so I attempted to apply the IFN003V1 patch to the 3.2 MC Library. The patch details reported 'nothing to patch'. I subsequently found the link to V3.0 of the MC Library, so I uninstalled V3.2 and installed V3.0. When I attempted to install the IFN003V1 patch I got an error 'can't open crosscheck.h' and I found that crosscheck.h was missing. I then ignored the error and proceeded with the patch. The patch details reported that it could not open several other files and it appears that nothing was patched. (The patch was run from the installation folder of the V3.0 MC Library.) What do I need to do to get set up for work on the IFN003V1? Does MC Library V3.2 already have the changes that are in the IFN003V1 patch for V3.0? If not, then what do I need to do in order to patch V3.0? When things are set up properly, where will I find an IFN003V1 project? Thanks for any help, Jack #3.2 #ifn003v1 #mc-libr-3.0 |
|
相关推荐
1个回答
|
|
梁咏琪,
感谢您的回复。我做了你的建议,补丁显然已成功应用。 我仍然对我的另一个问题感到好奇: 3.0应用IFN003V1补丁是否具有3.2没有的功能?这也适用于3.3吗? 再次感谢你的帮助, 插口 以上来自于谷歌翻译 以下为原文 Gigi, Thanks for your reply. I did what you suggested and the patch apparently applied successfully. I am still curious about my other question: Does 3.0 with the IFN003V1 patch applied have some features that 3.2 does not have? Will this be true of 3.3 as well? Thanks again for your help, Jack |
|
|
|
只有小组成员才能发言,加入小组>>
请教:在使用UDE STK时,单片机使用SPC560D30L1,在配置文件怎么设置或选择?里面只有SPC560D40的选项
2730 浏览 1 评论
3239 浏览 1 评论
请问是否有通过UART连接的两个微处理器之间实现双向值交换的方法?
1808 浏览 1 评论
3647 浏览 6 评论
6035 浏览 21 评论
1339浏览 4评论
198浏览 3评论
对H747I-DISCO写程序时将CN2的st-link复用为usart1,再次烧录时无法检测到stlink怎么解决?
350浏览 2评论
STM32G474RE芯片只是串口发个数据就发烫严重是怎么回事?
442浏览 2评论
STM32处理增量式编码器Z信号如何判断中断是正转的还是反向转的?
273浏览 2评论
小黑屋| 手机版| Archiver| 德赢Vwin官网 ( 湘ICP备2023018690号 )
GMT+8, 2024-12-23 12:01 , Processed in 1.153603 second(s), Total 78, Slave 62 queries .
Powered by 德赢Vwin官网 网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
德赢Vwin官网 观察
版权所有 © 湖南华秋数字科技有限公司
德赢Vwin官网 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号