[问答]

PIC32MZ0512EFE064仅与调试器一起运行

问答对人有帮助，内容完整，我也想知道答案 0 大家好，我收到了来自Microchip的一些样品，并开始测试一个。不幸的是，它似乎不能在发布模式下工作。只有PIC，MCLR电阻器，ICD连接器和3.3V电容器，内部振荡器，最小程序。xc32 1.42.到目前为止，已经尝试了：尝试使用另一个程序员，尝试使用另一个电源，检查所有电源和编程引脚连接，尝试使用几种配置（代码保护、jtag、调试关闭/打开），尝试直接在MCLR上应用复位电压。无事可做。我开始认为，作为一个示例，只需要附加调试器。随着调试器附加，PIC工作如预期！有什么想法吗？非常感谢你！约翰以上来自于百度翻译以下为原文 Hello all, I've received some samples from Microchip and started to test one. Unfortunately, it seems not to work in release mode. Minimal hardware. Only PIC, MCLR resistor, ICD connector and capacitors on 3.3V, internal oscillator, minimal program. xc32 1.42. Things tried so far: try with another programmer, tried with another power supply, checked all power and programming pins connections, tried with several configurations (code protect, jtag, debug off/on, ), tried to apply reset voltage directly on the MCLR. Nothing to do. I've come to think that, being a sample, only works with debugger attached. With the debugger attached, the PIC works as expected! Any idea? Thank you very much! John 0
2019-6-5 13:47:07　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × qun333 该类别下有 57 个回答。邀请回答 caoguiqun 该类别下有 56 个回答。邀请回答技术发广告该类别下有 56 个回答。邀请回答 psw30 该类别下有 44 个回答。邀请回答伊丹姿子该类别下有 41 个回答。邀请回答 uwufwjrw 该类别下有 39 个回答。邀请回答 hetao1111 该类别下有 38 个回答。邀请回答 lc123617 该类别下有 35 个回答。邀请回答欧阳大大该类别下有 32 个回答。邀请回答作死不止该类别下有 31 个回答。邀请回答 asd010 该类别下有 31 个回答。邀请回答 60user92 该类别下有 29 个回答。邀请回答 wy8719 该类别下有 29 个回答。邀请回答嘻嘻爱哈哈该类别下有 28 个回答。邀请回答 haikitty 该类别下有 28 个回答。邀请回答 ju978779 该类别下有 28 个回答。邀请回答 xiuzhen122 该类别下有 27 个回答。邀请回答 pol666 该类别下有 27 个回答。邀请回答 ueywyrsdfs 该类别下有 26 个回答。邀请回答 lhly23 该类别下有 25 个回答。邀请回答举报李小雯相关推荐 • PIC32MZ0512EFE064单片机利用ICSP下载程序不成功 3008 • PIC32MZ中断不起作用 746 • 外部中断服务程序无法启动 1222 • 主振荡器无法在PIC32MZ0512EFE064上启动 556 • 使用PIC32MZ0512EFK064出现错误 1418 • PIC32MZ Harmony DHCP DISCOVERER仅发送42个字节 827 • 开关PIC和I2C3不起作用 1520 • 如何在软件中重置18F420与水晶一起运行？ 1548 • 怎么从PIC32MX移植到PIC32MZ？ 2589 • Harmony 2.01中和声位爆炸I2C驱动程序代码中的两个相当大的错误 936 2个回答

答案对人有帮助，有参考价值 0 嗨，样品是原装设备，所以如果周围有电子电路或程序有问题，建议您在PIC32MZ启动器工具包用户手册上查看PIC32MZ周围的电路。您可能还想查看Olimex板示意图：https://www.olimex.com/Pr。Octus/PIC/Dealth/PIC32-EZ64／开源硬件。你使用和声来初始化PIC32吗？当做以上来自于百度翻译以下为原文 Hi, Samples are original devices so if there is an issue it has to see with either the electronic circuitry around or the program. I suggest you look at the circuitry arounf PIC32MZ on the PIC32MZ starter kit user manual. You may want also to check the Olimex board schematic : https://www.olimex.com/Products/PIC/Development/PIC32-EMZ64/open-source-hardware. Are you using Harmony to initialize your PIC32 ? Regards

2019-6-5 13:54:08 评论举报杨叶

答案对人有帮助，有参考价值 0 大家好，我几乎要发疯了，因为这个…#pragma configFDMTEN=OFFit是死人定时器重置PIC.mad：无论如何，非常感谢你们！以上来自于百度翻译以下为原文 Hello all, I've almost become mad because of this... #pragma config FDMTEN = OFF it was the dead man timer resetting the PIC. mad: Thank you very much, anyway!

2019-6-5 14:09:35 评论举报徐敏