怎么使用PSOC 3进行接近感应

你好，
我很新的PSoC和嵌入式编程。我一直在与CopSoSE接近感兴趣的问题。我创建了一个接近小部件并给它分配了一个传感器。我在我的板上还有其他的CasSoIP按钮，这些按钮已经配置好了，正在工作。我还没能找到如何使用接近传感器的调谐器。我读到除了默认小部件之外，所有部件都默认启用。如何手动启用邻近控件，以便在调谐器中使用它？下面是我的代码处理CAPSENSE的部分。谢谢你的帮助。
沃尔特
（这部分代码是我的主要部分）
*开始调谐器操作*/
CAPENSESE11TUNESTART（）；
CAPENSESE1LN EnababelSoor（CAPENSESE1 1SyrRoMyRealSistRoal1O0SY PROX）；/ /不确定把它放在哪里？？
（；）
{
CopsSeNe11TuneCube（）；
}
*结束调谐器操作*/



以下为原文
Hello,
I am very new with PSOC and embedded programming. I have been having issues with CapSense proximity sensing. I have created a proximity widget and assigned it a sensor. I have other capsense buttons on my board which have been configured as well and are working. I have not been able to figure out how to use the tuner with a proximity sensor. I read that all widgets are enabled by default except proximity widgets. How do you manually enable a proximity widget so you can use it in the tuner? Below is the part of my code that is dealing with CapSense. Thank you for your help.
-Walt

(This por tion of code is in my main)

/* start tuner operation */
CapSense_1_TunerStart();
CapSense_1_EnableSensor(CapSense_1_SENSOR_PROXIMITYSENSOR1_0__PROX); //Not sure where to put this??
for(;;)
{
CapSense_1_TunerComm();
}
/* end tuner operation */