电源拨动开关

大家好，
我对PSoC创建者来说是相当新的。我正在与PSoC 5LP开发工具包一起工作。附加到这个消息是我的项目，我正在努力使用一个开关来打开一个LED，但也使用相同的开关关闭LED，然后打开另一个后，保持LED 4秒。我设计了一个我最有信心的设计，用一个借方到柜台。
我现在的问题是我正在建设的C。如果我使用DeBunter SypLeTy，我可以轻而易举地用开关拨动LED，但随着计数器的连接，我似乎失去了这种能力。我也似乎无法让另一个LED在4秒后打开。请帮忙。



以下为原文
Hi Everyone,
I'm fairly new to the PSoC creator. I'm working with the PSoC 5LP develeopment kit. Attached to this message is my project I am working on to use a switch to turn on a LED but to also use that same switch to turn off the LED and turn on another after holding that LED for 4 seconds. I set up a design that I'm most confident will work, with a debouncer to a counter.
The issue I am having is with the main.c that I am building. If I use the debouncer sperately I can toggle the LED on and off with the switch easily, but with the counter connected I seem to lose this capability. Also i cannot seem to get the other LED to turn on after 4 seconds. PLS HELP.