如何采集解调的IQ样本

您可以通过“软决策IQ样本”来定义您的意思吗？
IQ Meas Time确实包含用于确定传输的位的IQ样本。



以下为原文

Could you please define what you mean by "soft decision IQ samples".
IQ Meas Time does contain the IQ samples that are used to determine the bits that were transmitted.

我想在解调之后但在它们被转换为Syms / Errs表中显示的符号之前捕获IQ样本。



以下为原文

I would like to capture the IQ samples after demodulation but before they are converted in the symbols which are displayed in the Syms/Errs table.

我知道这一点。
我在1点/符号和4点/符号处捕获了IQ测量时间样本。
1samplesymbol.emf是我最感兴趣的。它显示了1点/符号的IQ Meas Time样本图。
IQMeasTime_TraceD.bmp只是说明了我在VSA上看到的，我想使用捕获的解调样本离线重现。编辑：Suchita于2012年5月15日上午10:19



以下为原文

I am aware of that. I captured IQ Meas Time samples at both 1 Point/symbol and at 4 Point/symbol. 1samplesymbol.emf is what I am most interested in. That shows the plot of IQ Meas Time sample at 1 Point/symbol. IQMeasTime_TraceD.bmp just illustrates what I see on the VSA which I would like to reproduce offline using captured demodulated samples.

Edited by: Suchita on May 15, 2012 10:19 AM