[问答]

81150A pulsar.exe崩溃

问答对人有帮助，内容完整，我也想知道答案 0 我们将两个81150A集成到一个长期自动化测试系统中，并且每个月左右测量被其中一个“崩溃”中断。我相信确切的措辞是：“Pulsar.exe中发生了本机异常。” 其中一个是触发另一个，它们由PC定期重新配置。在某些循环中，“主”81150正在接收软件触发器，其间隔为几秒，但通常根据测试周期以突发模式操作半分钟到15分钟。我们现在已经看到两个发电机都出错了。最初我们认为这是一个I / O问题（使用labview来控制它们）并且已经使用USB，GPIB和LAN全部用于控制/触发并且现在全部用它们发出错误。因为我们不想太多停机时间（当我们重新启动实验时发生了崩溃）我们没有更新固件并且是2.04或2.05，而我认为最新版本是2.09。我们没有更新固件的另一个原因是建议不要降级，一些团队成员担心更新会引入其他问题而我们无法回复。我的主要问题是：是否曾见过此行为，是否是为解决此问题而专门设计的最后几个固件更新？如果是这种情况，那么我可以自信地告诉我的同事我们应该在下次停机时更新固件。以上来自于谷歌翻译以下为原文 We have two 81150A's integrated into a long-term automated test system, and every month or so the measurement is interrupted by one of them 'crashing'. I believe the exact wording is: "A native exception has occurred in Pulsar.exe." One of them is triggering the other, and they are reconfigured periodically by a PC. There are certain cycles in which the 'master' 81150 is receiving software triggers with intervals on the order of seconds, but generally it is operated in a burst mode for half a minute to 15 minutes depending on the test cycle. We have now seen that error on both generators. Initially we thought it was an I/O problem (using Labview to control them) and have used USB, GPIB, and LAN all for control/triggering and sen the error with all of them now. Because we've not wanted too much downtime (when there's a crash we restart the experiment) we haven't updated the firmware and are on 2.04 or 2.05, whereas I think the most recent revision is 2.09. Another reason we haven't updated the firmware is that it's recommended to NOT downgrade, and some team members fear that additional issues could be introduced with an update and we couldn't go back. My primary question is: Has this behavior been seen before, and were any of the last few firmware updates specifically designed to address this issue? If that's the case then I can tell my colleagues confidently that we should update the firmware at the next downtime. 0
2019-8-1 06:55:20　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × kingnet_52040 该类别下有 195 个回答。邀请回答 60user7 该类别下有 81 个回答。邀请回答蓝色冰汐该类别下有 45 个回答。邀请回答醉狼工作室该类别下有 41 个回答。邀请回答 ianwhoani 该类别下有 30 个回答。邀请回答 dkhwakd 该类别下有 25 个回答。邀请回答 aaabbb567 该类别下有 23 个回答。邀请回答 e08506806 该类别下有 20 个回答。邀请回答 szzjfyp 该类别下有 18 个回答。邀请回答 sonia87 该类别下有 16 个回答。邀请回答 ningee 该类别下有 16 个回答。邀请回答 zouqinxiang 该类别下有 15 个回答。邀请回答 xj5548 该类别下有 15 个回答。邀请回答 daichuangs 该类别下有 14 个回答。邀请回答 derek88 该类别下有 14 个回答。邀请回答 hzmbs2016 该类别下有 12 个回答。邀请回答 JST2006 该类别下有 12 个回答。邀请回答 bisong13 该类别下有 11 个回答。邀请回答 hu_wflllllllg21 该类别下有 11 个回答。邀请回答 fichesw 该类别下有 11 个回答。邀请回答举报陈迪相关推荐 • 81150A中的外部触发 1107 • 81150A是否可以通过vba加载文件？ 1078 • 81150A响应速度慢 761 • 怎么使用81150A脉冲发生器来操作激光器 2119 • _pn.exe崩溃 1393 • 生成EXE发生崩溃 6095 • LABVIEW生成EXE过程中软件崩溃！ 3522 • proteus 8.0仿真8086崩溃了，显示psd.exe停止工作，大神们，求教啊 6924 • makehex.exe崩溃 2035 • Windows 10上的ISE 14.7崩溃 1795 1个回答

答案对人有帮助，有参考价值 0 你好普雷斯顿，请更新到2.09。这将解决问题。在这种情况下，您还可以通过任何方式降级到2.04 / 2.05.Regards，Pulser支持以上来自于谷歌翻译以下为原文 Hello Preston, please update to 2.09. This will fix the issue. In this case, you can also downgrade to 2.04 / 2.05 if necessary by any means. Regards, Pulser Support

2019-8-1 07:14:36 评论举报刘羽扬