[问答]

使用SampleDoorLock开启一个定时器来检测按键抢包没有抢出来的原因？

2020-4-28 10:44:37 1230

0 描述： 1、CC2530 非开发套件，使用 SampleDoorLock 作为协调器、SampleDoorLockController作用终端 2、终端（SampleDoorLockController）开启一个定时器来检测按键（100ms），例如：P1_5 ==1时，来发起Becon reques 请求并且可以入网（入网抓包如下图） 3、例如：P1_6 ==1时，来发送解锁命令，但是数据发来出来，抢包没有抢出来。debug能正常进入定时器检测，例程其他地方没有改动，请问问题出在那里呢？谢谢，代码如下： if ( events & SAMPLEDOORLOCK_wds ) [ osal_start_timerEx( zclSampleDoorLockController_TaskID, SAMPLEDOORLOCK_wds, 100 ); // zcl_EZModeAction ( EZMODE_ACTION_TIMED_OUT, NULL ); // EZ-Mode timed out if(P1_6==1) [ // increase PIN number if ( giDoorLockScreenMode == DOORLOCK_PINMODE ) [ if ( giDoorLockPINColumnCount < 4 ) [ if ( giDoorLockPINCount > 8 ) [ giDoorLockPINCount = 0; ] else [ giDoorLockPINCount++; ] ] ] // for all other modes, lock/unlock door else [ zclDoorLock_t cmd; cmd.pPinRfidCode = aiDoorLockPIN; static bool locked = TRUE; giDoorLockScreenMode = DOORLOCK_MAINMODE; if ( locked ) [ zclClosures_SendDoorLockUnlockDoor( SAMPLEDOORLOCKCONTROLLER_ENDPOINT, &zclSampleDoorLockController_DstAddr, &cmd, false, zclSampleDoorLockControllerSeqNum++ ); locked = FALSE; ] else [ zclClosures_SendDoorLockLockDoor( SAMPLEDOORLOCKCONTROLLER_ENDPOINT, &zclSampleDoorLockController_DstAddr, &cmd, false, zclSampleDoorLockControllerSeqNum++ ); locked = TRUE; ] ] ] if(P1_5==1) [ if ( ( giDoorLockScreenMode == DOORLOCK_MAINMODE ) \|\| ( giDoorLockScreenMode == DOORLOCK_HELPMODE ) ) [ giDoorLockScreenMode = DOORLOCK_MAINMODE;#ifdef ZCL_EZMODE [ zclEZMode_InvokeData_t ezModeData; static uint16 clusterIDs[] = [ ZCL_CLUSTER_ID_CLOSURES_DOOR_LOCK ]; // only bind on the on/off cluster // Invoke EZ-Mode ezModeData.endpoint = SAMPLEDOORLOCKCONTROLLER_ENDPOINT; // endpoint on which to invoke EZ-Mode if ( ( zclSampleDoorLockController_NwkState == DEV_ZB_COORD ) \|\| ( zclSampleDoorLockController_NwkState == DEV_ROUTER ) \|\| ( zclSampleDoorLockController_NwkState == DEV_END_DEVICE ) ) [ ezModeData.onNetwork = TRUE; // node is already on the network ] else [ ezModeData.onNetwork = FALSE; // node is not yet on the network ] ezModeData.initiator = TRUE; // DoorLock Controller is an initiator ezModeData.numActiveInClusters = 0; ezModeData.pActiveInClusterIDs = NULL; ezModeData.numActiveOutClusters = 1; // active output cluster ezModeData.pActiveOutClusterIDs = clusterIDs; zcl_InvokeEZMode( &ezModeData );#ifdef LCD_SUPPORTED HalLcdWriteString( "EZMode", HAL_LCD_LINE_2 );#endif ]// NOT ZCL_EZMODE, Use EndDeviceBind#else [ zAddrType_t dstAddr; HalLedSet ( HAL_LED_4, HAL_LED_MODE_OFF ); // Initiate an End Device Bind Request, this bind request will // only use a cluster list that is important to binding. dstAddr.addrMode = afAddr16Bit; dstAddr.addr.shortAddr = 0; // Coordinator makes the match ZDP_EndDeviceBindReq( &dstAddr, NLME_GetShortAddr(), SAMPLEDOORLOCKCONTROLLER_ENDPOINT, ZCL_HA_PROFILE_ID, 0, NULL, // No incoming clusters to bind ZCLSAMPLEDOORLOCKCONTROLLER_BINDINGLIST, bindingOutClusters, TRUE ); ]#endif // ZCL_EZMODE ] ] return ( events ^ SAMPLEDOORLOCK_wds ); ] 0
2020-4-28 10:44:37　　评论淘帖0 举报相关推荐 • 大联大抢楼活动ing好礼抢抢抢 18854 • 【名单公布】抢五折（35元包邮）购Nanopi NEO开发板资格，小伙伴速来抢抢抢！ 11068 • 如何实现一个软件定时器？ 632 • 如何快速实现一个定时器 767 • 分享一个厨房定时器电路 1441 • STM32实战四定时器和按键 18 • 双十一抢货开启！小心别上假车！ 6384 • C51中如何通过一个外部中断和定时器来实现对速度的检测？ 1008 • 请问怎么用一个硬件定时器来实现多个不同的软件定时器？ 2115 • 小程序也来“抢”商业闭环？ 1148 1 个讨论

0 如果定义了ZCL_EZMODE的话，首先需要进行两个设备在EZ_MODE下绑定的过程。确保SampleDoorLock和SampleDoorLockController都处于EZ_MODE的状态下。另外在一般应用中SampleDoorLock是实际的锁，是低功耗设备，所以是zigbee网络里的end device SampleDoorLockController是控制端，一般可能是协调器等设备。

2020-4-28 10:50:50 评论举报 1^# 李果