[问答]

ESP MESH各节点无法互联是为什么？如何解决？

问答对人有帮助，内容完整，我也想知道答案 0 最近测试esp-mesh，发现使用例程编译后没两个esp32开发板没办法组网，已经试遍所有办法。 SDK是Arduino 2.0.0 rc1(idf 4.4)。之前用IDF3.3.1测试也是相同的结果。使用idf 4.4的代码如下(两块开发板刷入相同内容）。 Code: Select all #include #include #include "esp_wifi.h" #include "esp_system.h" #include "esp_event.h" #include "esp_log.h" #include "esp_mesh.h" #include "esp_mesh_internal.h" #include "nvs_flash.h" #include "esp_netif.h" static bool is_mesh_connected = false; static mesh_addr_t mesh_parent_addr; static int mesh_layer = -1; static esp_netif_t netif_sta = NULL; #define CONFIG_MESH_ROUTE_TABLE_SIZE 50 uint8_t g_meshAddr[6] = {0}; uint8_t g_deviceId[6] = {0}; #define CONFIG_MESH_TOPOLOGY MESH_TOPO_TREE / MESH_TOPO_TREE / MESH_TOPO_CHAIN / #define CONFIG_MESH_PS_DEV_DUTY 10 / 1 - 100 / #define CONFIG_MESH_PS_DEV_DUTY_TYPE MESH_PS_DEVICE_DUTY_REQUEST / MESH_PS_DEVICE_DUTY_REQUEST / MESH_PS_DEVICE_DUTY_DEMAND / #define CONFIG_MESH_PS_NWK_DUTY 10 #define CONFIG_MESH_PS_NWK_DUTY_DURATION -1 #define CONFIG_MESH_PS_NWK_DUTY_RULE MESH_PS_NETWORK_DUTY_APPLIED_ENTIRE //#define CONFIG_MESH_ENABLE_PS void mesh_event_handler(void arg, esp_event_base_t event_base, int32_t event_id, void event_data) { mesh_addr_t id = {0}; static uint8_t last_layer = 0; switch(event_id) { case MESH_EVENT_STARTED: { esp_mesh_get_id(&id); Serial.printf("ID:%02x:%02x:%02x:%02x:%02x:%02xn", MAC2STR(id.addr)); is_mesh_connected = false; mesh_layer = esp_mesh_get_layer(); } break; case MESH_EVENT_STOPPED: { Serial.printf("n"); is_mesh_connected = false; mesh_layer = esp_mesh_get_layer(); } break; case MESH_EVENT_CHILD_CONNECTED: { mesh_event_child_connected_t child_connected = (mesh_event_child_connected_t )event_data; Serial.printf("aid:%d, %02x:%02x:%02x:%02x:%02x:%02xn", child_connected->aid, MAC2STR(child_connected->mac)); } break; case MESH_EVENT_CHILD_DISCONNECTED: { mesh_event_child_disconnected_t child_disconnected = (mesh_event_child_disconnected_t )event_data; Serial.printf("aid:%d, %02x:%02x:%02x:%02x:%02x:%02xn", child_disconnected->aid, MAC2STR(child_disconnected->mac)); } break; case MESH_EVENT_ROUTING_TABLE_ADD: { mesh_event_routing_table_change_t routing_table = (mesh_event_routing_table_change_t )event_data; Serial.printf("add %d, new:%dn", routing_table->rt_size_change, routing_table->rt_size_new); } break; case MESH_EVENT_ROUTING_TABLE_REMOVE: { mesh_event_routing_table_change_t routing_table = (mesh_event_routing_table_change_t )event_data; Serial.printf("remove %d, new:%dn", routing_table->rt_size_change, routing_table->rt_size_new); } break; case MESH_EVENT_NO_PARENT_FOUND: { mesh_event_no_parent_found_t no_parent = (mesh_event_no_parent_found_t )event_data; Serial.printf("scan times:%dn", no_parent->scan_times); } / TODO handler for the failure / break; case MESH_EVENT_PARENT_CONNECTED: { mesh_event_connected_t connected = (mesh_event_connected_t )event_data; esp_mesh_get_id(&id); mesh_layer = connected->self_layer; memcpy(&mesh_parent_addr.addr, connected->connected.bssid, 6); Serial.printf( "layer:%d-->%d, parent:%02x:%02x:%02x:%02x:%02x:%02x%s, ID:%02x:%02x:%02x:%02x:%02x:%02xn", last_layer, mesh_layer, MAC2STR(mesh_parent_addr.addr), esp_mesh_is_root() ? "" : (mesh_layer == 2) ? "" : "", MAC2STR(id.addr)); last_layer = mesh_layer; is_mesh_connected = true; if(esp_mesh_is_root()) { // 根节点需要在这里开启DHCP获取IP esp_netif_dhcpc_start(netif_sta); } else { } // 开启2个任务 // -> esp_mesh_comm_p2p_start(); } break; case MESH_EVENT_PARENT_DISCONNECTED: { mesh_event_disconnected_t disconnected = (mesh_event_disconnected_t )event_data; Serial.printf( "reason:%dn", disconnected->reason); is_mesh_connected = false; mesh_layer = esp_mesh_get_layer(); } break; case MESH_EVENT_LAYER_CHANGE: { mesh_event_layer_change_t layer_change = (mesh_event_layer_change_t )event_data; mesh_layer = layer_change->new_layer; Serial.printf("layer:%d-->%d%sn", last_layer, mesh_layer, esp_mesh_is_root() ? "" : (mesh_layer == 2) ? "" : ""); last_layer = mesh_layer; if(mesh_layer == 1) { // 这里1是根节点，意味着节点此时变化为根节点 // 此处可以添加节点切换的用户自定义功能 } else { } } break; case MESH_EVENT_ROOT_ADDRESS: { mesh_event_root_address_t root_addr = (mesh_event_root_address_t )event_data; esp_mesh_get_id(&id); Serial.printf("root address:%02x:%02x:%02x:%02x:%02x:%02x, ID:%02x:%02x:%02x:%02x:%02x:%02xn", MAC2STR(root_addr->addr), MAC2STR(id.addr)); // 此处登记自身在路由表中的地址 int route_table_size = 0; mesh_addr_t route_table[CONFIG_MESH_ROUTE_TABLE_SIZE]; esp_mesh_get_routing_table((mesh_addr_t ) &route_table, CONFIG_MESH_ROUTE_TABLE_SIZE * 6, &route_table_size); memcpy(g_meshAddr, route_table[0].addr, 6); Serial.printf("meshAddr:%02x:%02x:%02x:%02x:%02x:%02xn", MAC2STR(g_meshAddr)); // 此处设置默认设备ID memcpy(g_deviceId, g_meshAddr, 6); } break; case MESH_EVENT_VOTE_STARTED: { mesh_event_vote_started_t vote_started = (mesh_event_vote_started_t )event_data; Serial.printf( "attempts:%d, reason:%d, rc_addr:%02x:%02x:%02x:%02x:%02x:%02xn", vote_started->attempts, vote_started->reason, MAC2STR(vote_started->rc_addr.addr)); } break; case MESH_EVENT_VOTE_STOPPED: { Serial.printf("n"); break; } case MESH_EVENT_ROOT_SWITCH_REQ: { mesh_event_root_switch_req_t switch_req = (mesh_event_root_switch_req_t )event_data; Serial.printf( "reason:%d, rc_addr:%02x:%02x:%02x:%02x:%02x:%02xn", switch_req->reason, MAC2STR( switch_req->rc_addr.addr)); } break; case MESH_EVENT_ROOT_SWITCH_ACK: { /* new root / mesh_layer = esp_mesh_get_layer(); esp_mesh_get_parent_bssid(&mesh_parent_addr); Serial.printf("layer:%d, parent:%02x:%02x:%02x:%02x:%02x:%02xn", mesh_layer, MAC2STR(mesh_parent_addr.addr)); } break; case MESH_EVENT_TODS_STATE: { mesh_event_toDS_state_t toDs_state = (mesh_event_toDS_state_t )event_data; Serial.printf("state:%dn", toDs_state); } break; case MESH_EVENT_ROOT_FIXED: { mesh_event_root_fixed_t root_fixed = (mesh_event_root_fixed_t )event_data; Serial.printf("%sn", root_fixed->is_fixed ? "fixed" : "not fixed"); } break; case MESH_EVENT_ROOT_ASKED_YIELD: { mesh_event_root_conflict_t root_conflict = (mesh_event_root_conflict_t )event_data; Serial.printf( "%02x:%02x:%02x:%02x:%02x:%02x, rssi:%d, capacity:%dn", MAC2STR(root_conflict->addr), root_conflict->rssi, root_conflict->capacity); } break; case MESH_EVENT_CHANNEL_SWITCH: { mesh_event_channel_switch_t channel_switch = (mesh_event_channel_switch_t )event_data; Serial.printf("new channel:%dn", channel_switch->channel); } break; case MESH_EVENT_SCAN_DONE: { mesh_event_scan_done_t scan_done = (mesh_event_scan_done_t )event_data; Serial.printf("number:%dn", scan_done->number); } break; case MESH_EVENT_NETWORK_STATE: { mesh_event_network_state_t network_state = (mesh_event_network_state_t )event_data; Serial.printf("is_rootless:%dn", network_state->is_rootless); } break; case MESH_EVENT_STOP_RECONNECTION: { Serial.printf("n"); } break; case MESH_EVENT_FIND_NETWORK: { mesh_event_find_network_t find_network = (mesh_event_find_network_t )event_data; Serial.printf("new channel:%d, router BSSID:%02x:%02x:%02x:%02x:%02x:%02xn", find_network->channel, MAC2STR(find_network->router_bssid)); } break; case MESH_EVENT_ROUTER_SWITCH: { mesh_event_router_switch_t router_switch = (mesh_event_router_switch_t )event_data; Serial.printf("new router:%s, channel:%d, %02x:%02x:%02x:%02x:%02x:%02xn", router_switch->ssid, router_switch->channel, MAC2STR(router_switch->bssid)); } break; default: Serial.printf("unknown id:%dn", event_id); break; } } void ip_event_handler(void arg, esp_event_base_t event_base, int32_t event_id, void event_data) { ip_event_got_ip_t event = (ip_event_got_ip_t ) event_data; Serial.printf("IP: %d.%d.%d.%dn", IP2STR(&event->ip_info.ip)); } #define DEFAULT_MESH_SSID "aaaaaaaaaa" /* Max=30+1 Min=8+1(Base64编码6字节MAC有8位)/ #define DEFAULT_MESH_PASSWORD "bbbbbbbbbb" / Max=60+1 / #define DEFAULT_MESH_CHANNEL 6 #define DEFAULT_MESH_MAX_PLAYER 6 #define DEFAULT_MESH_AP_PASSWD "MESH_AP_PASSWORD" #define DEFAULT_MESH_AP_CONNECTIONS 6 static const uint8_t MESH_ID[6] = { 0x77, 0x77, 0x77, 0x77, 0x77, 0x77}; //static const uint8_t MESH_ID[6] = { 0x88, 0x88, 0x88, 0x88, 0x88, 0x88}; void setup() { // put your setup code here, to run once: Serial.begin(115200); / 初始化NVS / nvs_flash_init(); / 初始化底层TCP/IP堆栈 / esp_netif_init(); / 事件初始化/ esp_event_loop_create_default(); / 为 Mesh 创建STA和AP模式网络接口（仅保存STA接口供进一步处理），并关闭DHCP服务器和客户端（DHCP客户端只有设备升根节点才启用） / esp_netif_create_default_wifi_mesh_netifs(&netif_sta, NULL); / Wi-Fi 初始化 / wifi_init_config_t config = WIFI_INIT_CONFIG_DEFAULT(); esp_wifi_init(&config); / 注册 IP 事件处理程序 / esp_event_handler_register(IP_EVENT, IP_EVENT_STA_GOT_IP, &ip_event_handler, NULL); esp_wifi_set_storage(WIFI_STORAGE_FLASH); esp_wifi_start(); / Mesh 初始化 / esp_mesh_init(); / 注册 Mesh 事件处理程序 / esp_event_handler_register(MESH_EVENT, ESP_EVENT_ANY_ID, &mesh_event_handler, NULL); / set mesh topology / esp_mesh_set_topology(CONFIG_MESH_TOPOLOGY); / 设置 Mesh 最大层 / esp_mesh_set_max_layer(DEFAULT_MESH_MAX_PLAYER); / 设置 Mesh 根节点推举百分比（只有达到此阈值才可成为根） / esp_mesh_set_vote_percentage(1); // ??? esp_mesh_set_xon_qsize(128); #ifdef CONFIG_MESH_ENABLE_PS / Enable mesh PS function / esp_mesh_enable_ps(); / 设置 Mesh AP模式关联过期时间（在AP模式下此时间内未收到某个子节点的任何数据，Mesh将子节点置为不活跃的并分离它） / esp_mesh_set_ap_assoc_expire(60); / better to increase the announce interval to avoid too much management traffic, if a small duty cycle is set. / esp_mesh_set_announce_interval(600, 3300); #else / Disable mesh PS function / esp_mesh_disable_ps(); esp_mesh_set_ap_assoc_expire(10); #endif / Mesh 配置 / / 默认启用 Mesh IE 加密 / mesh_cfg_t cfg; cfg.crypto_funcs = &g_wifi_default_mesh_crypto_funcs; / Mesh ID / memcpy((uint8_t ) &cfg.mesh_id, MESH_ID, 6); /* 路由器 / / 信道（需与路由器信道匹配）/ cfg.channel = DEFAULT_MESH_CHANNEL; // 这里为了方便直接填写了要接入WIFI的SSID和密码 cfg.router.ssid_len = strlen(DEFAULT_MESH_SSID); strcpy((char)cfg.router.ssid, DEFAULT_MESH_SSID); strcpy((char)cfg.router.password, DEFAULT_MESH_PASSWORD); / Mesh softAP / esp_mesh_set_ap_authmode(WIFI_AUTH_WPA2_PSK); cfg.mesh_ap.max_connection = DEFAULT_MESH_AP_CONNECTIONS; strcpy((char)cfg.mesh_ap.password, DEFAULT_MESH_AP_PASSWD); esp_mesh_set_config(&cfg); /* Mesh 启动 / esp_mesh_start(); #ifdef CONFIG_MESH_ENABLE_PS / set the device active duty cycle. (default:10, MESH_PS_DEVICE_DUTY_REQUEST) / esp_mesh_set_active_duty_cycle(CONFIG_MESH_PS_DEV_DUTY, CONFIG_MESH_PS_DEV_DUTY_TYPE); / set the network active duty cycle. (default:10, -1, MESH_PS_NETWORK_DUTY_APPLIED_ENTIRE) */ esp_mesh_set_network_duty_cycle(CONFIG_MESH_PS_NWK_DUTY, CONFIG_MESH_PS_NWK_DUTY_DURATION, CONFIG_MESH_PS_NWK_DUTY_RULE); #endif Serial.printf("mesh starts successfully, heap:%d, %s<%d>%s, ps:%dn", esp_get_minimum_free_heap_size(), esp_mesh_is_root_fixed() ? "root fixed" : "root not fixed", esp_mesh_get_topology(), esp_mesh_get_topology() ? "(chain)":"(tree)", esp_mesh_is_ps_enabled()); } void loop() { // put your main code here, to run repeatedly: //delay(10); Serial.println(esp_mesh_get_type()); delay(1000); } 运行结果输出以下内容： setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz mesh starts successfully, heap:106896, root not fixed<0>(tree), ps:0 scan times:60 scan times:60 scan times:60 scan times:60 scan times:60 ... 0
2023-2-20 06:39:56　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × hgimtk 该类别下有 38 个回答。邀请回答 wang21cj 该类别下有 38 个回答。邀请回答新星之火12138 该类别下有 33 个回答。邀请回答 zyh34997 该类别下有 32 个回答。邀请回答就好国dd 该类别下有 32 个回答。邀请回答 chm5 该类别下有 32 个回答。邀请回答 heks 该类别下有 31 个回答。邀请回答 zaichenxi 该类别下有 31 个回答。邀请回答四川赵赵该类别下有 29 个回答。邀请回答 flowerddd 该类别下有 29 个回答。邀请回答 muwersddg 该类别下有 29 个回答。邀请回答星星公交站该类别下有 28 个回答。邀请回答 vinww特烦恼该类别下有 28 个回答。邀请回答 caosurround 该类别下有 28 个回答。邀请回答 overheat 该类别下有 27 个回答。邀请回答 gvjhvbc 该类别下有 27 个回答。邀请回答安德森大该类别下有 27 个回答。邀请回答 xwgc888 该类别下有 27 个回答。邀请回答 lkjflksjfsa 该类别下有 27 个回答。邀请回答 h1654155143.8331 该类别下有 27 个回答。邀请回答举报 caosurround 相关推荐 • ESP32能够既作为mesh节点又作为wifi节点？ 307 • 请问ESP-mesh如何禁止设备入网？ 236 • ESP MESH可以将所有的节点都连接至路由上吗？ 252 • 使用“espconn_mesh_get_node_info”获取节点父节点或子节点时，它无法正常工作怎么解决？ 184 • 如何将ble_mesh_node和ble_mesh_provisioner上传到ESP WROOM32板上？ 251 • ESP32怎么触发节点进入ESP_BLE_MESH_NODE_PROV_RESET_EVT事件？ 154 • BLE Mesh Node启用/禁用手动一键入网为什么找不到节点? 490 • ESP BLE MESH快速配置问题求解 261 • 如何在ESP-IDF的组件中使用传感器服务器和客户端模型？如何使用esp32 ble Mesh协议构建传感器网络？ 254 • 请问有人用过ESP_BLE_MESH的heartbeat的功能吗？ 195