[问答]

ESP32-S3连不上WIFI怎么解决？

63 esp32s3 WIFI

问答对人有帮助，内容完整，我也想知道答案0 使用的ESP32-S3的模组,IDF版本是5.0,提交是a82e6e63d98bb051d4c59cb3d440c537ab9f74b0,连接WIFi时会报wifi:AP not PMF Capable when STA requires, reject profile,导致无法连上WIFI. 详细log如下: D (2480) esp_ne tif_lwip: LwIP stack has been initialized[0m D (2480) esp_netif_lwip: esp-netif has been successfully initialized[0m D (2482) event: created task for loop 0x3fccc1cc[0m D (2482) event: running task for loop 0x3fccc1cc[0m D (2486) event: created event loop 0x3fccc1cc[0m D (2494) esp_netif_objects: esp_netif_add_to_list 0x3fccced4[0m D (2500) esp_netif_objects: esp_netif_add_to_list netif added successfully (total netifs: 1)[0m I (2510) pp: pp rom version: e7ae62f I (2514) net80211: net80211 rom version: e7ae62f D (2518) nvs: nvs_open_from_partition misc 1[0m I (2526) wifi:wifi driver task: 3fccf70c, prio:23, stack:6656, core=0 D (2530) nvs: nvs_open_from_partition nvs.net80211 1[0m D (2534) nvs: nvs_get opmode 1[0m D (2538) nvs: nvs_get_str_or_blob sta.ssid[0m D (2542) nvs: nvs_get sta.authmode 1[0m D (2546) nvs: nvs_get_str_or_blob sta.pswd[0m D (2550) nvs: nvs_get_str_or_blob sta.pmk[0m D (2554) nvs: nvs_get sta.chan 1[0m D (2556) nvs: nvs_get auto.conn 1[0m D (2560) nvs: nvs_get bssid.set 1[0m D (2564) nvs: nvs_get_str_or_blob sta.bssid[0m D (2568) nvs: nvs_get sta.lis_intval 2[0m D (2572) nvs: nvs_get sta.phym 1[0m D (2574) nvs: nvs_get sta.phybw 1[0m D (2578) nvs: nvs_get_str_or_blob sta.apsw[0m D (2582) nvs: nvs_get_str_or_blob sta.apinfo[0m D (2588) nvs: nvs_get sta.scan_method 1[0m D (2590) nvs: nvs_get sta.sort_method 1[0m D (2594) nvs: nvs_get sta.minrssi 1[0m D (2598) nvs: nvs_get sta.minauth 1[0m D (2602) nvs: nvs_get sta.pmf_e 1[0m D (2606) nvs: nvs_get sta.pmf_r 1[0m D (2608) nvs: nvs_get sta.btm_e 1[0m D (2612) nvs: nvs_get sta.rrm_e 1[0m D (2616) nvs: nvs_get sta.mbo_e 1[0m D (2618) nvs: nvs_get_str_or_blob ap.ssid[0m D (2624) nvs: nvs_get_str_or_blob ap.passwd[0m D (2628) nvs: nvs_get_str_or_blob ap.pmk[0m D (2632) nvs: nvs_get ap.chan 1[0m D (2634) nvs: nvs_get ap.authmode 1[0m D (2638) nvs: nvs_get ap.hidden 1[0m D (2642) nvs: nvs_get ap.max.conn 1[0m D (2644) nvs: nvs_get bcn.interval 2[0m D (2648) nvs: nvs_get ap.phym 1[0m D (2652) nvs: nvs_get ap.phybw 1[0m D (2654) nvs: nvs_get ap.sndchan 1[0m D (2658) nvs: nvs_get ap.pmf_e 1[0m D (2662) nvs: nvs_get ap.pmf_r 1[0m D (2664) nvs: nvs_get ap.p_cipher 1[0m D (2668) nvs: nvs_get lorate 1[0m D (2672) nvs: nvs_get_str_or_blob country[0m D (2676) nvs: nvs_get ap.ftm_r 1[0m D (2680) nvs: nvs_set ap.sndchan 1 1[0m I (2682) wifi:wifi firmware version: e887b51 I (2686) wifi:wifi certification version: v7.0 I (2690) wifi:config NVS flash: enabled I (2694) wifi:config nano formating: disabled I (2698) wifi:Init data frame dynamic rx buffD (2702) efuse: In EFUSE_BLK2__DATA4_REG is used 2 bits starting with 0 bit[0m D (2710) efuse: In EFUSE_BLK2__DATA4_REG is used 8 bits starting with 21 bit[0m D (2716) efuse: In EFUSE_BLK2__DATA4_REG is used 3 bits starting with 29 bit[0m D (2724) efuse: In EFUSE_BLK2__DATA5_REG is used 3 bits starting with 0 bit[0m D (2730) efuse: In EFUSE_BLK2__DATA5_REG is used 6 bits starting with 3 bit[0m D (2738) efuse: In EFUSE_BLK2__DATA5_REG is used 6 bits starting with 9 bit[0m er num: 32 I (2746) wifi:Init management frame dynamic rx buffer num: 32 I (2752) wifi:Init management short buffer num: 32 I (2756) wifi:Init static tx buffer num: 16 I (2760) wifi:Init tx cache buffer num: 32 I (2764) wifi:Init static tx FG buffer num: 2 I (2768) wifi:Init static rx buffer size: 1600 I (2772) wifi:Init static rx buffer num: 10 I (2776) wifi:Init dynamic rx buffer num: 32 I (2780) wifi_init: rx ba win: 6 I (2784) wifi_init: tcpip mbox: 32 I (2788) wifi_init: udp mbox: 6 I (2792) wifi_init: tcp mbox: 6 I (2794) wifi_init: tcp tx win: 5744 I (2800) wifi_init: tcp rx win: 5744 I (2804) wifi_init: tcp mss: 1440 I (2808) wifi_init: WiFi/LWIP prefer SPIRAM D (2812) nvs: nvs_get opmode 1[0m D (3816) nvs: nvs_get_str_or_blob BleConfWiFiSSID[0m D (3816) nvs: nvs_get_str_or_blob BleConfWiFiPW[0m I (3816) wifi: 检测到有配网的数据,SSID:AAC@NET,密码:AACAAC50 D (3820) wifi:clear blacklist D (3824) nvs: nvs_set_blob sta.ssid 36[0m D (3828) nvs: nvs_set_blob sta.pswd 65[0m D (3832) nvs: nvs_set bssid.set 1 0[0m D (3834) nvs: nvs_set sta.lis_intval 2 3[0m D (3838) nvs: nvs_set sta.chan 1 0[0m D (3842) nvs: nvs_set sta.scan_method 1 0[0m D (3846) nvs: nvs_set sta.sort_method 1 0[0m D (3850) nvs: nvs_set sta.minrssi 1 -127[0m D (3854) nvs: nvs_set sta.minauth 1 0[0m D (3858) nvs: nvs_set_blob sta.apsw 2[0m D (3862) nvs: nvs_set sta.pmf_e 1 1[0m D (3866) nvs: nvs_set sta.pmf_r 1 80[0m D (3870) nvs: nvs_set sta.rrm_e 1 0[0m D (3872) nvs: nvs_set sta.btm_e 1 0[0m D (3876) nvs: nvs_set sta.mbo_e 1 0[0m D (3880) nvs: nvs_set_blob sta.apinfo 700[0m D (3886) ADC: Wi-Fi takes adc2 lock.[0m D (3888) wifi:filter: set rx policy=0 I (3890) wifi:mode : sta (7ca0:e0:86:e8) I (3894) wifi:enable tsf D (3896) wifi:filter: set rx policy=1 D (3900) wifi:connect status 0 -> 0 D (3904) wifi:Start wifi connect D (3906) wifi:connect status 0 -> 0 D (3910) wifi:connect chan=0 D (3912) wifi:first chan=1 D (3914) wifi:connect status 0 -> 1 D (3918) wifi:filter: set rx policy=3 D (3922) wifi:clear scan ap list D (3924) wifi:start scan: type=0x50f, priority=2, cb=0x420c7d28, arg=0x0, ss_state=0x1, time=3929823, index=0 D (3934) wifi:perform scan: ss_state=0x9, chan<1,0>, dur<0,120> D (3940) event: running post WIFI_EVENT:2 with handler 0x42078a2c and context 0x3fccd000 on loop 0x3fccc1cc[0m D (3950) wifi_init_default: wifi_start esp-netif:0x3fccced4 event-id2[0m D (3956) wifi_init_default: WIFI mac address: 7c de a0 e0 86 e8[0m D (3962) esp_netif_handlers: esp_netif action has started with netif0x3fccced4 from event_id=2[0m D (3970) esp_netif_lwip: check: remote, if=0x3fccced4 fn=0x4207288c [0m D (3978) esp_netif_lwip: esp_netif_start_api 0x3fccced4[0m D (3982) esp_netif_lwip: esp_netif_get_hostname esp_netif:0x3fccced4[0m D (3988) esp_netif_lwip: check: local, if=0x3fccced4 fn=0x42073280 [0m D (3996) esp_netif_lwip: esp_netif_update_default_netif_lwip 0x3fccced4[0m D (4002) esp_netif_lwip: call api in lwip: ret=0x0, give sem[0m D (4008) event: running post WIFI_EVENT:2 with handler 0x4200b71c and context 0x3fcdaa78 on loop 0x3fccc1cc[0m I (4018) wifi: wifi_event_handler:WIFI_EVENT_STA_START D (4024) wifi:Start wifi connect E (4026) wifi:sta is connecting, return error I (4082) wifi:AP not PMF Capable when STA requires, reject profile D (4180) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (4180) wifi:perform scan: ss_state=0x9, chan<2,0>, dur<0,120> D (4420) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (4422) wifi:perform scan: ss_state=0x9, chan<3,0>, dur<0,120> D (4662) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (4664) wifi:perform scan: ss_state=0x9, chan<4,0>, dur<0,120> D (4904) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (4904) wifi:perform scan: ss_state=0x9, chan<5,0>, dur<0,120> D (5144) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (5146) wifi:perform scan: ss_state=0x9, chan<6,0>, dur<0,120> D (5386) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (5386) wifi:perform scan: ss_state=0x9, chan<7,0>, dur<0,120> D (5628) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (5628) wifi:perform scan: ss_state=0x9, chan<8,0>, dur<0,120> D (5868) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (5868) wifi:perform scan: ss_state=0x9, chan<9,0>, dur<0,120> D (6110) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (6110) wifi:perform scan: ss_state=0x9, chan<10,0>, dur<0,120> D (6350) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (6350) wifi:perform scan: ss_state=0x9, chan<11,0>, dur<0,120> D (6590) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (6592) wifi:perform scan: ss_state=0x9, chan<12,0>, dur<360,360> D (6832) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (6832) wifi:perform scan: ss_state=0x9, chan<13,0>, dur<360,360> D (7072) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (7074) wifi:filter: set rx policy=4 D (7074) wifi:first chan=1 D (7074) wifi:handoff_cb: status=0 D (7076) wifi:clear rc list D (7078) wifi:clear blacklist D (7080) wifi:send disconnect event D (7084) wifi:connect status 1 -> 3 D (7088) wifi:disable connect timer D (7090) wifi:clear scan ap list D (7094) event: running post WIFI_EVENT:5 with handler 0x42078a44 and context 0x3fccd090 on loop 0x3fccc1cc[0m D (7104) esp_netif_handlers: esp_netif action disconnected with netif0x3fccced4 from event_id=5[0m D (7112) esp_netif_lwip: check: remote, if=0x3fccced4 fn=0x42072ad4 [0m D (7118) esp_netif_lwip: esp_netif_down_api esp_netif:0x3fccced4[0m D (7124) esp_netif_lwip: esp_netif_start_ip_lost_timer esp_netif:0x3fccced4[0m D (7132) esp_netif_lwip: if0x3fccced4 start ip lost tmr: no need start because netif=0x3c484900 interval=120 ip=0[0m D (7142) esp_netif_lwip: check: local, if=0x3fccced4 fn=0x42073280 [0m D (7148) esp_netif_lwip: esp_netif_update_default_netif_lwip 0x3fccced4[0m D (7156) esp_netif_lwip: call api in lwip: ret=0x0, give sem[0m D (7160) event: running post WIFI_EVENT:5 with handler 0x4200b71c and context 0x3fcdaa78 on loop 0x3fccc1cc[0m I (7170) wifi: wifi_event_handler:WIFI_EVENT_STA_DISCONNECTED D (7178) wifi:Start wifi connect D (7180) wifi:connect status 3 -> 0 D (7184) wifi:connect chan=0 D (7186) wifi:first chan=1 D (7188) wifi:connect status 0 -> 1 D (7192) wifi:filter: set rx policy=3 D (7194) wifi:clear scan ap list D (7198) wifi:start scan: type=0x50f, priority=2, cb=0x420c7d28, arg=0x0, ss_state=0x1, time=7203263, index=0 D (7208) wifi:perform scan: ss_state=0x9, chan<1,0>, dur<0,120> I (7214) wifi: retry to connect to the AP I (7256) wifi:AP not PMF Capable when STA requires, reject profile I (7360) wifi:AP not PMF Capable when STA requires, reject profile D (7454) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (7454) wifi:perform scan: ss_state=0x9, chan<2,0>, dur<0,120> D (7694) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (7694) wifi:perform scan: ss_state=0x9, chan<3,0>, dur<0,120> D (7936) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (7936) wifi:perform scan: ss_state=0x9, chan<4,0>, dur<0,120> D (8176) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (8176) wifi:perform scan: ss_state=0x9, chan<5,0>, dur<0,120> D (8418) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (8418) wifi:perform scan: ss_state=0x9, chan<6,0>, dur<0,120> D (8658) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (8658) wifi:perform scan: ss_state=0x9, chan<7,0>, dur<0,120> D (8900) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (8900) wifi:perform scan: ss_state=0x9, chan<8,0>, dur<0,120> D (9140) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (9140) wifi:perform scan: ss_state=0x9, chan<9,0>, dur<0,120> D (9380) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (9382) wifi:perform scan: ss_state=0x9, chan<10,0>, dur<0,120> D (9622) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (9622) wifi:perform scan: ss_state=0x9, chan<11,0>, dur<0,120> D (9862) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (9864) wifi:perform scan: ss_state=0x9, chan<12,0>, dur<360,360> D (10104) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (10104) wifi:perform scan: ss_state=0x9, chan<13,0>, dur<360,360> D (10344) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (10346) wifi:filter: set rx policy=4 D (10346) wifi:first chan=1 D (10346) wifi:handoff_cb: status=0 D (10348) wifi:clear rc list D (10350) wifi:clear blacklist D (10354) wifi:send disconnect event D (10356) wifi:connect status 1 -> 3 D (10360) wifi:disable connect timer D (10364) wifi:clear scan ap list D (10366) event: running post WIFI_EVENT:5 with handler 0x42078a44 and context 0x3fccd090 on loop 0x3fccc1cc[0m D (10376) esp_netif_handlers: esp_netif action disconnected with netif0x3fccced4 from event_id=5[0m D (10386) esp_netif_lwip: check: remote, if=0x3fccced4 fn=0x42072ad4 [0m D (10392) esp_netif_lwip: esp_netif_down_api esp_netif:0x3fccced4[0m D (10398) esp_netif_lwip: esp_netif_start_ip_lost_timer esp_netif:0x3fccced4[0m D (10404) esp_netif_lwip: if0x3fccced4 start ip lost tmr: no need start because netif=0x3c484900 interval=120 ip=0[0m D (10416) esp_netif_lwip: check: local, if=0x3fccced4 fn=0x42073280 [0m D (10422) esp_netif_lwip: esp_netif_update_default_netif_lwip 0x3fccced4[0m D (10428) esp_netif_lwip: call api in lwip: ret=0x0, give sem[0m D (10434) event: running post WIFI_EVENT:5 with handler 0x4200b71c and context 0x3fcdaa78 on loop 0x3fccc1cc[0m I (10444) wifi: wifi_event_handler:WIFI_EVENT_STA_DISCONNECTED D (10450) wifi:Start wifi connect D (10454) wifi:connect status 3 -> 0 D (10458) wifi:connect chan=0 D (10460) wifi:first chan=1 D (10462) wifi:connect status 0 -> 1 D (10466) wifi:filter: set rx policy=3 D (10470) wifi:clear scan ap list D (10472) wifi:start scan: type=0x50f, priority=2, cb=0x420c7d28, arg=0x0, ss_state=0x1, time=10477610, index=0 D (10482) wifi:perform scan: ss_state=0x9, chan<1,0>, dur<0,120> I (10488) wifi: retry to connect to the AP I (10534) wifi:AP not PMF Capable when STA requires, reject profile I (10636) wifi:AP not PMF Capable when STA requires, reject profile D (10728) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (10728) wifi:perform scan: ss_state=0x9, chan<2,0>, dur<0,120> D (10968) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (10970) wifi:perform scan: ss_state=0x9, chan<3,0>, dur<0,120> D (11210) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (11210) wifi:perform scan: ss_state=0x9, chan<4,0>, dur<0,120> D (11450) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (11450) wifi:perform scan: ss_state=0x9, chan<5,0>, dur<0,120> D (11692) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (11692) wifi:perform scan: ss_state=0x9, chan<6,0>, dur<0,120> D (11932) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (11932) wifi:perform scan: ss_state=0x9, chan<7,0>, dur<0,120> D (12174) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (12174) wifi:perform scan: ss_state=0x9, chan<8,0>, dur<0,120> esp32_task_info_viewer_s,23136,1950300,global_task,0,1,1080,0, FPGA_gpio_task,1,1,924,0,IDLE,1,0,800,36,IDLE,1,0,796,41,button_task,2,1,1300,0,motor_task,2,1,308,0,display_task,2,3,2552,0,adc_task,2,1,300,0,fire_level_control_a_task,2,2,1440,0,fire_level_control_b_task,2,2,1436,0,mqtt_server_rx_task,2,6,1520,0,mqtt_server_heartbeat_task,2,6,532,0,Tmr Svc,2,1,1236,0,mqtt_server_task,2,6,316,0,tiT,2,18,1352,0,wifi_app_task,2,1,100,0,ota_task,2,5,3344,0,display_port_task,2,10,1616,3,BTU_TASK,2,20,6796,0,BTC_TASK,2,19,1768,0,BleRxDataTask,2,8,1292,0,BleTxDataTask,2,8,1456,0,ipc0,2,24,840,4,ipc1,2,24,844,4,sys_evt,2,20,376,0,btController,2,23,2132,0,wifi,2,23,3944,2,esp_timer,3,22,3184,0,hciT,2,22,1484,0,esp32_task_info_viewer_e D (12414) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (12414) wifi:perform scan: ss_state=0x9, chan<9,0>, dur<0,120> D (12658) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (12660) wifi:perform scan: ss_state=0x9, chan<10,0>, dur<0,120> D (12900) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (12900) wifi:perform scan: ss_state=0x9, chan<11,0>, dur<0,120> D (13140) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (13142) wifi:perform scan: ss_state=0x9, chan<12,0>, dur<360,360> D (13382) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (13382) wifi:perform scan: ss_state=0x9, chan<13,0>, dur<360,360> D (13622) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (13624) wifi:filter: set rx policy=4 D (13624) wifi:first chan=1 D (13624) wifi:handoff_cb: status=0 D (13626) wifi:clear rc list D (13628) wifi:clear blacklist D (13632) wifi:send disconnect event D (13634) wifi:connect status 1 -> 3 D (13638) wifi:disable connect timer D (13642) wifi:clear scan ap list D (13644) event: running post WIFI_EVENT:5 with handler 0x42078a44 and context 0x3fccd090 on loop 0x3fccc1cc[0m D (13654) esp_netif_handlers: esp_netif action disconnected with netif0x3fccced4 from event_id=5[0m D (13662) esp_netif_lwip: check: remote, if=0x3fccced4 fn=0x42072ad4 [0m D (13670) esp_netif_lwip: esp_netif_down_api esp_netif:0x3fccced4[0m D (13676) esp_netif_lwip: esp_netif_start_ip_lost_timer esp_netif:0x3fccced4[0m D (13682) esp_netif_lwip: if0x3fccced4 start ip lost tmr: no need start because netif=0x3c484900 interval=120 ip=0[0m D (13694) esp_netif_lwip: check: local, if=0x3fccced4 fn=0x42073280 [0m D (13700) esp_netif_lwip: esp_netif_update_default_netif_lwip 0x3fccced4[0m D (13706) esp_netif_lwip: call api in lwip: ret=0x0, give sem[0m D (13712) event: running post WIFI_EVENT:5 with handler 0x4200b71c and context 0x3fcdaa78 on loop 0x3fccc1cc[0m I (13722) wifi: wifi_event_handler:WIFI_EVENT_STA_DISCONNECTED D (13728) wifi:Start wifi connect D (13732) wifi:connect status 3 -> 0 D (13736) wifi:connect chan=0 D (13738) wifi:first chan=1 D (13740) wifi:connect status 0 -> 1 D (13744) wifi:filter: set rx policy=3 D (13748) wifi:clear scan ap list D (13750) wifi:start scan: type=0x50f, priority=2, cb=0x420c7d28, arg=0x0, ss_state=0x1, time=13755559, index=0 D (13760) wifi:perform scan: ss_state=0x9, chan<1,0>, dur<0,120> I (13766) wifi: retry to connect to the AP I (13810) wifi:AP not PMF Capable when STA requires, reject profile I (13912) wifi:AP not PMF Capable when STA requires, reject profile D (14006) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (14006) wifi:perform scan: ss_state=0x9, chan<2,0>, dur<0,120> D (14246) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (14248) wifi:perform scan: ss_state=0x9, chan<3,0>, dur<0,120> D (14488) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (14488) wifi:perform scan: ss_state=0x9, chan<4,0>, dur<0,120> D (14728) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (14728) wifi:perform scan: ss_state=0x9, chan<5,0>, dur<0,120> D (14970) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (14970) wifi:perform scan: ss_state=0x9, chan<6,0>, dur<0,120> D (15210) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (15210) wifi:perform scan: ss_state=0x9, chan<7,0>, dur<0,120> 0 本主题由 Harmony技术专家于 2024-6-17 14:48 审核通过
2024-6-17 08:18:45　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × hgimtk 该类别下有 38 个回答。邀请回答 wang21cj 该类别下有 38 个回答。邀请回答 zyh34997 该类别下有 32 个回答。邀请回答就好国dd 该类别下有 32 个回答。邀请回答新星之火12138 该类别下有 32 个回答。邀请回答 chm5 该类别下有 32 个回答。邀请回答 heks 该类别下有 31 个回答。邀请回答 zaichenxi 该类别下有 31 个回答。邀请回答 muwersddg 该类别下有 29 个回答。邀请回答四川赵赵该类别下有 29 个回答。邀请回答 flowerddd 该类别下有 29 个回答。邀请回答 caosurround 该类别下有 28 个回答。邀请回答星星公交站该类别下有 28 个回答。邀请回答 vinww特烦恼该类别下有 28 个回答。邀请回答安德森大该类别下有 27 个回答。邀请回答 lkjflksjfsa 该类别下有 27 个回答。邀请回答 xwgc888 该类别下有 27 个回答。邀请回答 overheat 该类别下有 27 个回答。邀请回答 h1654155143.8331 该类别下有 27 个回答。邀请回答 gvjhvbc 该类别下有 27 个回答。邀请回答举报 xymbmcu 相关推荐 •esp32s3调用restart后连不上wifi怎么解决？212 • 使用VScode编辑和编译esp32-s3，目标设备选择esp32-s3时报错如何解决？387 •esp32s3调用restart后连不上wifi的原因？366 •ESP32-S3(ESP32-S2,ESP32)在商用触摸按键面板上使用安全吗？361 • 请问esp32s3调用restart后连不上wifi是什么原因呢？154 • 在esp32-s3使用esp_wifi_scan_start()开始扫描WiFi，扫描附近所有可用的AP时，可以区分是2.4g频段还是5g频段吗？80 •ESP32-S3/C3上的RSA外围设备比S2慢50%的原因？296 • VScode目标设备选择esp32-s3时报错的原因？89 • 请问ESP32-S3上摄像头，WIFI，蓝牙键鼠，蓝牙耳机对话，SD卡，USBOTG，一路串口通讯可以同时使用吗？291 •ESP32、ESP32-S3是否有类似ARM的位带操作？178 1个回答

答案对人有帮助，有参考价值0 在esp_wifi_set_config的时候主动加上wifi_config.sta.pmf_cfg.capable = true;wifi_config.sta.pmf_cfg.required = false;就OK了

2024-6-17 14:22:07 评论举报袁沁茹