完善资料让更多小伙伴认识你，还能领取20积分哦，立即完善>
3天内不再提示
|
在淘宝上买的
PCB板，在本
论坛下载的程序不能用，经过修过P1口改成P3口，可以正常点亮，音频和按键接口不知道要改那个地方，本人是菜鸟，请大师傅指导一下
#include #include #define uchar unsigned char #define uint unsigned int uchar display[8][8]; /*rank:A,1,2,3,4,I,心,U*/ uchar code table_cha[8][8]={0x51,0x51,0x51,0x4a,0x4a,0x4a,0x44,0x44,0x18,0x1c,0x18,0x18,0x18,0x18,0x18,0x3c,0x3c,0x66,0x66,0x30,0x18,0xc,0x6,0xf6,0x3c,0x66,0x60,0x38,0x60,0x60,0x66,0x3c,0x30,0x38,0x3c,0x3e,0x36,0x7e,0x30,0x30,0x3c,0x3c,0x18,0x18,0x18,0x18,0x3c,0x3c,0x66,0xff,0xff,0xff,0x7e,0x3c,0x18,0x18,0x66,0x66,0x66,0x66,0x66,0x66,0x7e,0x3c}; /*the "ideasoft"*/ uchar code table_id[40]={0x81,0xff,0x81,0x00,0xff,0x81,0x81,0x7e,0x00,0xff,0x89,0x89,0x00,0xf8,0x27,0x27,0xf8,0x00,0x8f,0x89,0x89,0xf9,0x00,0xff,0x81,0x81,0xff,0x00,0xff,0x09,0x09,0x09,0x01,0x0,0x01,0x01,0xff,0x01,0x01,0x00}; /*railway*/ uchar code dat[128]={0x0,0x20,0x40,0x60,0x80,0xa0,0xc0,0xe0,0xe4,0xe8,0xec,0xf0,0xf4,0xf8,0xfc,0xdc,0xbc,0x9c,0x7c,0x5c,0x3c,0x1c,0x18,0x14,0x10,0xc,0x8,0x4,0x25,0x45,0x65,0x85,0xa5,0xc5,0xc9,0xcd,0xd1,0xd5,0xd9,0xb9,0x99,0x79,0x59,0x39,0x35,0x31,0x2d,0x29,0x4a,0x6a,0x8a,0xaa,0xae,0xb2,0xb6,0x96,0x76,0x56,0x52,0x4e,0x6f,0x8f,0x93,0x73,0x6f,0x8f,0x93,0x73,0x4a,0x6a,0x8a,0xaa,0xae,0xb2,0xb6,0x96,0x76,0x56,0x52,0x4e,0x25,0x45,0x65,0x85,0xa5,0xc5,0xc9,0xcd,0xd1,0xd5,0xd9,0xb9,0x99,0x79,0x59,0x39,0x35,0x31,0x2d,0x29,0x0,0x20,0x40,0x60,0x80,0xa0,0xc0,0xe0,0xe4,0xe8,0xec,0xf0,0xf4,0xf8,0xfc,0xdc,0xbc,0x9c,0x7c,0x5c,0x3c,0x1c,0x18,0x14,0x10,0xc,0x8,0x4}; /*railway 2*/ uchar code dat2[28]={0x0,0x20,0x40,0x60,0x80,0xa0,0xc0,0xe0,0xe4,0xe8,0xec,0xf0,0xf4,0xf8,0xfc,0xdc,0xbc,0x9c,0x7c,0x5c,0x3c,0x1c,0x18,0x14,0x10,0xc,0x8,0x4}; /*railway 3*/ uchar code dat3[24]={0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x16,0x26,0x36,0x46,0x56,0x66,0x65,0x64,0x63,0x62,0x61,0x60,0x50,0x40,0x30,0x20,0x10}; /*3p char*/ uchar code table_3p[3][8]={0xff,0x89,0xf5,0x93,0x93,0xf5,0x89,0xff,0x0e,0x1f,0x3f,0x7e,0x7e,0x3f,0x1f,0x0e,0x18,0x3c,0x7e,0xff,0x18,0x18,0x18,0x18}; /*ini tializtion That is to initialize the program . It is write to set the timer in c52 mcu. So the program can renovate the led_3d_cube in fixed time use the interrupt function.*/ void sinter() { IE=0x82; TCON=0x01; TH0=0xc0; TL0=0; TR0=1; } void delay5us(void) //误差 -0.026765046296us STC 1T 22.1184Mhz { unsigned char b; for(b=7;b>0;b--); //for(a=2;a>0;a--); } void delay(uint i) { while (i--){ delay5us();}//12t的mcu 注释这个延时即可 } /*To judge the num bit*/ uchar judgebit(uchar num,uchar b) { char n; num=num&(1< n=1; else n=0; return n; } /*To figure out the round number*/ uchar abs(uchar a) { uchar b; b=a/10; a=a-b*10; if (a>=5) b++; return b; } /*To figure out the absolute value*/ uchar abss(char a) { if (a<0) a=-a; return a; } /*The function can comparat the character. And remove the big one to the back.*/ void max(uchar *a,uchar *b) { uchar t; if ((*a)>(*b)) { t=(*a); (*a)=(*b); (*b)=t; } } /*The function is to figure out the max number and return it.*/ uchar maxt(uchar a,uchar b,uchar c) { if (a if (a return a; } void clear(char le) { uchar i,j; for (j=0;j<8;j++) { for (i=0;i<8;i++) display[j][i]=le; } } void trailler(uint speed) { char i,j; for (i=6;i>=-3;i--) { if (i>=0) { for (j=0;j<8;j++) display[j][i]=display[j][i+1]; } if (i<4) { for (j=0;j<8;j++) display[j][i+4]=0; } delay(speed); } } void point(uchar x,uchar y,uchar z,uchar le) { uchar ch1,ch0; ch1=1< if (le) display[z][y]=display[z][y]|ch1; else display[z][y]=display[z][y]&ch0; } void type(uchar cha,uchar y) { uchar xx; for (xx=0;xx<8;xx++) { display[xx][y]=table_cha[cha][xx]; } } /*The first variable is the distance from the midpoint. The second is the layer. the third is the flash speed of the time between each two point. The forth is the enable io,it controls weather draw or claen.*/ void cirp(char cpp,uchar dir,uchar le) { uchar a,b,c,cp; if ((cpp<128)&(cpp>=0)) { if (dir) cp=127-cpp; else cp=cpp; a=(dat[cp]>>5)&0x07; b=(dat[cp]>>2)&0x07; c=dat[cp]&0x03; if (cpp>63) c=7-c; point (a,b,c,le); } } void line(uchar x1,uchar y1,uchar z1,uchar x2,uchar y2,uchar z2,uchar le) { char t,a,b,c,a1,b1,c1,i; a1=x2-x1; b1=y2-y1; c1=z2-z1; t=maxt(abss(a1),abss(b1),abss(c1)); a=x1*10; b=y1*10; c=z1*10; a1=a1*10/t; b1=b1*10/t; c1=c1*10/t; for (i=0;i point(abs(a),abs(b),abs(c),le); a+=a1; b+=b1; c+=c1; } point(x2,y2,z2,le); } void box(uchar x1,uchar y1,uchar z1,uchar x2,uchar y2,uchar z2,uchar fill,uchar le) { uchar i,j,t=0; max(&x1,&x2); max(&y1,&y2); max(&z1,&z2); for (i=x1;i<=x2;i++) t|=1< t=~t; if (fill) { if (le) { for (i=z1;i<=z2;i++) { for (j=y1;j<=y2;j++) display[j][i]|=t; } } else { for (i=z1;i<=z2;i++) { for (j=y1;j<=y2;j++) display[j][i]&=t; } } } else { if (le) { display[y1][z1]|=t; display[y2][z1]|=t; display[y1][z2]|=t; display[y2][z2]|=t; } else { display[y1][z1]&=t; display[y2][z1]&=t; display[y1][z2]&=t; display[y2][z2]&=t; } t=(0x01< t=~t; if (le) { for (j=z1;j<=z2;j+=(z2-z1)) { for (i=y1;i<=y2;i++) display[i][j]|=t; } for (j=y1;j<=y2;j+=(y2-y1)) { for (i=z1;i<=z2;i++) display[j][i]|=t; } } else { for (j=z1;j<=z2;j+=(z2-z1)) { for (i=y1;i<=y2;i++) { display[i][j]&=t; } } for (j=y1;j<=y2;j+=(y2-y1)) { for (i=z1;i<=z2;i++) { display[j][i]&=t; } } } } } void box_apeak_xy(uchar x1,uchar y1,uchar z1,uchar x2,uchar y2,uchar z2,uchar fill,uchar le) { uchar i; max(&z1,&z2); if (fill) { for (i=z1;i<=z2;i++) { line (x1,y1,i,x2,y2,i,le); } } else { line (x1,y1,z1,x2,y2,z1,le); line (x1,y1,z2,x2,y2,z2,le); line (x2,y2,z1,x2,y2,z2,le); line (x1,y1,z1,x1,y1,z2,le); } } void poke(uchar n,uchar x,uchar y) { uchar i; for (i=0;i<8;i++) { point(x,y,i,judgebit(n,i)); } } void boxtola(char i,uchar n) { if ((i>=0)&(i<8)) { poke(n,0,7-i); } if ((i>=8)&(i<16)) { poke(n,i-8,0); } if ((i>=16)&(i<24)) { poke(n,7,i-16); } } void rolldisplay(uint speed) { uchar j; char i,a; for (i=23;i>-40;i--) { for (j=0;j<40;j++) { a=i+j; if ((a>=0)&(a<24)) boxtola(a,table_id[j]); } delay(speed); } } void roll_apeak_yz(uchar n,uint speed) { uchar i; switch(n) { case 1: for (i=0;i<7;i++) { display[i][7]=0; display[7][6-i]=255; delay(speed); }; break; case 2: for (i=0;i<7;i++) { display[7][7-i]=0; display[6-i][0]=255; delay(speed); }; break; case 3: for (i=0;i<7;i++) { display[7-i][0]=0; display[0][i+1]=255; delay(speed); }; break; case 0: for (i=0;i<7;i++) { display[0][i]=0; display[i+1][7]=255; delay(speed); }; } } void roll_apeak_xy(uchar n,uint speed) { uchar i; switch(n) { case 1: for (i=0;i<7;i++) { line(0,i,0,0,i,7,0); line(i+1,7,0,i+1,7,7,1); delay(speed); }; break; case 2: for (i=0;i<7;i++) { line(i,7,0,i,7,7,0); line(7,6-i,0,7,6-i,7,1); delay(speed); }; break; case 3: for (i=0;i<7;i++) { line(7,7-i,0,7,7-i,7,0); line(6-i,0,0,6-i,0,7,1); delay(speed); }; break; case 0: for (i=0;i<7;i++) { line(7-i,0,0,7-i,0,7,0); line(0,i+1,0,0,i+1,7,1); delay(speed); }; } } void roll_3_xy(uchar n,uint speed) { uchar i; switch(n) { case 1: for (i=0;i<8;i++) { box_apeak_xy (0,i,0,7,7-i,7,1,1); delay(speed); if (i<7) box_apeak_xy (3,3,0,0,i,7,1,0); }; break; case 2: for (i=0;i<8;i++) { box_apeak_xy (7-i,0,0,i,7,7,1,1); delay(speed); if (i<7) box_apeak_xy (3,4,0,i,7,7,1,0); }; break; case 3: for (i=0;i<8;i++) { box_apeak_xy (0,i,0,7,7-i,7,1,1); delay(speed); if (i<7) box_apeak_xy (4,4,0,7,7-i,7,1,0); }; break; case 0: for (i=0;i<8;i++) { box_apeak_xy (7-i,0,0,i,7,7,1,1); delay(speed); if (i<7) box_apeak_xy (4,3,0,7-i,0,7,1,0); }; } } void trans(uchar z,uint speed) { uchar i,j; for (j=0;j<8;j++) { for (i=0;i<8;i++) { display[z][i]>>=1; } delay(speed); } } void tranoutchar(uchar c,uint speed) { uchar i,j,k,a,i2=0; for (i=0;i<8;i++) { if (i<7) box_apeak_xy (i+1,0,0,i+1,7,7,1,1); box_apeak_xy (i2,0,0,i2,7,7,1,0); a=0; i2=i+1; for (j=0;j<=i;j++) { a=a|(1< for (k=0;k<8;k++) { display[k][3]|=table_cha[c][k]&a; display[k][4]|=table_cha[c][k]&a; } delay(speed); } } void transss() { uchar i,j; for (i=0;i<8;i++) { for (j=0;j<8;j++) display[i][j]<<=1; } } /*From now on,the function below is to display the flash.*/ void flash_1() { clear(0); type(1,0); delay(60000); type(2,0); delay(60000); type(3,0); delay(60000); type(4,0); delay(60000); delay(60000); clear(0); rolldisplay(30000); type(0,7); delay(60000); trailler(6000); delay(60000); } void flash_2() { uchar i; for (i=129;i>0;i--) { cirp(i-2,0,1); delay(8000); cirp(i-1,0,0); } delay(8000); for (i=0;i<136;i++) { cirp(i,1,1); delay(8000); cirp(i-8,1,0); } delay(8000); for (i=129;i>0;i--) { cirp(i-2,0,1); delay(8000); } delay(8000); for (i=0;i<128;i++) { cirp(i-8,1,0); delay(8000); } delay(60000); } void flash_3() { char i; for (i=0;i<8;i++) { box_apeak_xy(0,i,0,7,i,7,1,1); delay(20000); if (i<7) box_apeak_xy(0,i,0,7,i,7,1,0); } for (i=7;i>=0;i--) { box_apeak_xy(0,i,0,7,i,7,1,1); delay(20000); if (i>0) box_apeak_xy(0,i,0,7,i,7,1,0); } for (i=0;i<8;i++) { box_apeak_xy(0,i,0,7,i,7,1,1); delay(20000); if (i<7) box_apeak_xy(0,i,0,7,i,7,1,0); } } void flash_4() { char i,j,an[8]; for (j=7;j<15;j++) an[j-7]=j; for (i=0;i<=16;i++) { for (j=0;j<8;j++) { if ((an[j]<8)&(an[j]>=0)) line(0,an[j],j,7,an[j],j,1); } for (j=0;j<8;j++) { if (((an[j]+1)<8)&(an[j]>=0)) line(0,an[j]+1,j,7,an[j]+1,j,0); } for (j=0;j<8;j++) { if (an[j]>0) an[j]--; } delay(15000); } for (j=0;j<8;j++) an[j]=1-j; for (i=0;i<=16;i++) { for (j=0;j<8;j++) { if ((an[j]<8)&(an[j]>=0)) line(0,an[j],j,7,an[j],j,1); } for (j=0;j<8;j++) { if (((an[j]-1)<7)&(an[j]>0)) line(0,an[j]-1,j,7,an[j]-1,j,0); } for (j=0;j<8;j++) { if (an[j]<7) an[j]++; } delay(15000); } } void flash_5() { uint a=15000;//a=delay char i=8,j,an[4]; //1 for (j=7;j<11;j++) an[j-7]=j; while(i--) { for (j=0;j<4;j++) { if (an[j]<8) box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1); if (an[j]<7) box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0); } for (j=0;j<4;j++) { if (an[j]>3) an[j]--; } delay(a); } //2 i=3; for (j=0;j<4;j++) an[j]=5-j; while(i--) { for (j=1;j<4;j++) { if (an[j]<4) box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1); if (an[j]<3) box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0); } for (j=0;j<4;j++) { if (an[j]>0) an[j]--; } delay(a); } //3 i=3; for (j=1;j<4;j++) an[j]=4-j; while(i--) { for (j=1;j<4;j++) { if (an[j]>=0) box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1); if (an[j]>0) box_apeak_xy(j,an[j]-1,j,7-j,an[j]-1,7-j,0,0); } for (j=1;j<4;j++) { if (an[j]<3) an[j]++; } delay(a); } //4 i=3; for (j=0;j<4;j++) an[j]=j+1; while(i--) { for (j=1;j<4;j++) { if (an[j]>3) box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1); if (an[j]>3) box_apeak_xy(j,an[j]-1,j,7-j,an[j]-1,7-j,0,0); } for (j=0;j<4;j++) an[j]++; delay(a); } //5 i=3; for (j=3;j<6;j++) an[j-2]=j; while(i--) { for (j=1;j<4;j++) { box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1); box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0); } for (j=0;j<4;j++) { if (an[j]>3) an[j]--; } delay(a); } //6 i=3; for (j=0;j<4;j++) an[j]=5-j; while(i--) { for (j=1;j<4;j++) { if (an[j]<4) box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1); if (an[j]<3) box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0); } for (j=0;j<4;j++) { if (an[j]>0) an[j]--; } delay(a); } //7 i=3; for (j=0;j<4;j++) an[j]=3-j; an[0]=2; while(i--) { for (j=0;j<3;j++) { if (an[j]>=0) box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1); if (an[j]>=0) box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0); } for (j=0;j<4;j++) { if (j<5-i) an[j]--; } delay(a); } //8 i=10; for (j=0;j<4;j++) an[j]=j-2; while(i--) { for (j=0;j<4;j++) { if (an[j]>=0) box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1); if (an[j]>=0) box_apeak_xy(j,an[j]-1,j,7-j,an[j]-1,7-j,0,0); } for (j=0;j<4;j++) { if (an[j]<7) an[j]++; } delay(a); } } void flash_6() { uchar i,j,k,z; roll_apeak_yz(1,10000); roll_apeak_yz(2,10000); roll_apeak_yz(3,10000); roll_apeak_yz(0,10000); roll_apeak_yz(1,10000); roll_apeak_yz(2,10000); roll_apeak_yz(3,10000); for (i=0;i<3;i++) { for (j=0;j<8;j++) { for (k=0;k<8;k++) { if ((table_3p[i][j]>>k)&1) { for (z=1;z<8;z++) { point (j,7-k,z,1); if (z-1) point (j,7-k,z-1,0); delay(5000); } } } } trans(7,15000); } } void flash_7() { uchar i; uint a=3000; roll_apeak_yz(0,10000); roll_apeak_yz(1,10000); roll_apeak_yz(2,10000); roll_apeak_yz(3,10000); roll_apeak_yz(0,10000); roll_apeak_yz(1,10000); roll_apeak_yz(2,10000); roll_apeak_yz(3,10000); roll_apeak_yz(0,10000); roll_apeak_yz(1,10000); roll_apeak_yz(2,10000); roll_apeak_xy(0,10000); roll_apeak_xy(1,10000); roll_apeak_xy(2,10000); roll_apeak_xy(3,10000); roll_apeak_xy(0,10000); roll_apeak_xy(1,10000); roll_apeak_xy(2,10000); roll_apeak_xy(3,10000); for (i=0;i<8;i++) { box_apeak_xy (0,i,0,7-i,i,7,1,1); delay(a); } delay(30000); roll_3_xy(0,a); delay(30000); roll_3_xy(1,a); delay(30000); roll_3_xy(2,a); delay(30000); roll_3_xy(3,a); delay(30000); roll_3_xy(0,a); delay(30000); roll_3_xy(1,a); delay(30000); roll_3_xy(2,a); delay(30000); roll_3_xy(3,a); for (i=7;i>0;i--) { box_apeak_xy(i,0,0,i,7,7,1,0); delay(a); } } void flash_8() { uchar i; for (i=5;i<8;i++) { tranoutchar(i,10000); delay(60000); delay(60000); } } void flash_9() { char i; uchar j,an[8],x,y,t,x1,y1; for (i=0;i<8;i++) { box_apeak_xy (i,0,0,i,7,7,1,1); if (i) box_apeak_xy (i-1,0,0,i-1,7,7,1,0); delay(10000); } roll_apeak_xy(3,10000); roll_apeak_xy(0,10000); roll_apeak_xy(1,10000); for (i=0;i<7;i++) { line(6-i,6-i,0,6-i,6-i,7,1); line(i,7,0,i,7,7,0); delay(10000); } for (i=0;i<8;i++) an[i]=14; for (i=0;i<85;i++) { clear(0); for (j=0;j<8;j++) { t=an[j]%28; x=dat2[t]>>5; y=(dat2[t]>>2)&0x07; t=(an[j]-14)%28; x1=dat2[t]>>5; y1=(dat2[t]>>2)&0x07; line(x,y,j,x1,y1,j,1); } for (j=0;j<8;j++) { if ((i>j)&(j>i-71)) an[j]++; } delay(5000); } for (i=0;i<85;i++) { clear(0); for (j=0;j<8;j++) { t=an[j]%28; x=dat2[t]>>5; y=(dat2[t]>>2)&0x07; t=(an[j]-14)%28; x1=dat2[t]>>5; y1=(dat2[t]>>2)&0x07; line(x,y,j,x1,y1,j,1); } for (j=0;j<8;j++) { if ((i>j)&(j>i-71)) an[j]--; } delay(5000); } for (i=0;i<29;i++) { clear(0); t=an[0]%28; x=dat2[t]>>5; y=(dat2[t]>>2)&0x07; t=(an[0]-14)%28; x1=dat2[t]>>5; y1=(dat2[t]>>2)&0x07; box_apeak_xy(x,y,0,x1,y1,7,0,1); box_apeak_xy(x,y,1,x1,y1,6,0,1); an[0]++; delay(5000); } for (i=0;i<16;i++) { clear(0); t=an[0]%28; x=dat2[t]>>5; y=(dat2[t]>>2)&0x07; t=(an[0]-14)%28; x1=dat2[t]>>5; y1=(dat2[t]>>2)&0x07; box_apeak_xy(x,y,0,x1,y1,7,1,1); an[0]--; delay(5000); } for (i=0;i<8;i++) { line(i,i,0,0,0,i,0); delay(5000); } for (i=1;i<7;i++) { line(i,i,7,7,7,i,0); delay(5000); } for (i=1;i<8;i++) { clear(0); box(7,7,7,7-i,7-i,7-i,0,1); delay(10000); } for (i=1;i<7;i++) { clear(0); box(0,0,0,7-i,7-i,7-i,0,1); delay(10000); } for (i=1;i<8;i++) { clear(0); box(0,0,0,i,i,i,0,1); delay(10000); } for (i=1;i<7;i++) { clear(0); box(7,0,0,i,7-i,7-i,0,1); delay(10000); } for (i=1;i<8;i++) { box(7,0,0,7-i,i,i,1,1); delay(10000); } for (i=1;i<7;i++) { clear(0); box(0,7,7,7-i,i,i,1,1); delay(10000); } } void flash_10() { uchar i,j,an[4],x,y,t; for (i=1;i<7;i++) { clear(0); box(0,6,6,1,7,7,1,1); box(i,6,6-i,i+1,7,7-i,1,1); box(i,6,6,i+1,7,7,1,1); box(0,6,6-i,1,7,7-i,1,1); box(0,6-i,6,1,7-i,7,1,1); box(i,6-i,6-i,i+1,7-i,7-i,1,1); box(i,6-i,6,i+1,7-i,7,1,1); box(0,6-i,6-i,1,7-i,7-i,1,1); delay(30000); } for (i=0;i<4;i++) { an[i]=6*i; } for (i=0;i<35;i++) { clear(0); for(j=0;j<4;j++) { t=an[j]%24; x=dat3[t]>>4; y=dat3[t]&0x0f; box(x,y,0,x+1,y+1,1,1,1); box(x,y,6,x+1,y+1,7,1,1); } for (j=0;j<4;j++) an[j]++; delay(10000); } for (i=0;i<35;i++) { clear(0); for(j=0;j<4;j++) { t=an[j]%24; x=dat3[t]>>4; y=dat3[t]&0x0f; box(x,y,0,x+1,y+1,1,1,1); box(x,y,6,x+1,y+1,7,1,1); } for (j=0;j<4;j++) an[j]--; delay(10000); } for (i=0;i<35;i++) { clear(0); for(j=0;j<4;j++) { t=an[j]%24; x=dat3[t]>>4; y=dat3[t]&0x0f; box(x,0,y,x+1,1,y+1,1,1); box(x,6,y,x+1,7,y+1,1,1); } for (j=0;j<4;j++) an[j]++; delay(10000); } for (i=0;i<36;i++) { clear(0); for(j=0;j<4;j++) { t=an[j]%24; x=dat3[t]>>4; y=dat3[t]&0x0f; box(x,0,y,x+1,1,y+1,1,1); box(x,6,y,x+1,7,y+1,1,1); } for (j=0;j<4;j++) an[j]--; delay(10000); } for (i=6;i>0;i--) { clear(0); box(0,6,6,1,7,7,1,1); box(i,6,6-i,i+1,7,7-i,1,1); box(i,6,6,i+1,7,7,1,1); box(0,6,6-i,1,7,7-i,1,1); box(0,6-i,6,1,7-i,7,1,1); box(i,6-i,6-i,i+1,7-i,7-i,1,1); box(i,6-i,6,i+1,7-i,7,1,1); box(0,6-i,6-i,1,7-i,7-i,1,1); delay(30000); } } void flash_11() { uchar i,j,t,x,y; uchar code daa[13]={0,1,2,0x23,5,6,7,6,5,0x23,2,1,0}; for (j=0;j<5;j++) { for (i=0;i<13;i++) { if (daa[i]>>4) { t=daa[i]&0x0f; line (0,0,t+1,0,7,t+1,1); } else t=daa[i]; line (0,0,t,0,7,t,1); transss(); delay(20000); } } for (j=1;j<8;j++) { if (j>3) t=4; else t=j; for (i=0;i<24;i+=j) { x=dat3[i]>>4; y=dat3[i]&0x0f; box_apeak_xy(0,x,y,0,x+1,y+1,1,1); transss(); delay(20000); } } for (j=1;j<8;j++) { if (j>3) t=4; else t=j; for (i=0;i<24;i+=j) { x=dat3[i]>>4; y=dat3[i]&0x0f; point (0,x,y,1); transss(); delay(20000); } } } void main() { sinter(); while(1){ // clear(0); /*play list*/ //flash_1(); clear(0); flash_2(); flash_3(); flash_4(); flash_4(); flash_5(); flash_5(); flash_6(); flash_7(); flash_8(); flash_9(); flash_10(); clear (0); flash_11(); flash_9(); flash_5(); flash_7(); flash_5(); flash_6(); flash_8(); flash_9(); flash_10(); } } //P0; //573 in //P1; //uln2803 //P2; //573 LE void print() interrupt 1 { uchar i; static uchar layer=0; P1=0; for (i=0;i<8;i++) { P2=1< P0=display[layer][i]; delay(3); } P1=1< layer++; else layer=0; TH0=0xc0; TL0=0; } 
0
|
|
相关推荐
1个回答
|
|
|
地方v第三方斯蒂芬斯蒂芬斯蒂芬宿舍的
|
|
|
|
|
你正在撰写答案
如果你是对答案或其他答案精选点评或询问，请使用“评论”功能。
嵌入式学习-飞凌嵌入式ElfBoard ELF 1板卡-shell脚本编写之变量
253 浏览0 评论
嵌入式学习-飞凌嵌入式ElfBoard ELF 1板卡-shell脚本编写之本地脚本的编写和执行
484 浏览0 评论
【xG24 Matter开发套件试用体验】深入了解Silicon Labs xG24 Matter开发套件
647 浏览0 评论
559 浏览0 评论
587 浏览0 评论
【youyeetoo X1 windows 开发板体验】少儿AI智能STEAM积木平台
10919 浏览31 评论
/6
关注我们的微信
下载发烧友APP
德赢Vwin官网 观察
版权所有 © 湖南华秋数字科技有限公司
德赢Vwin官网 （电路图） 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证：合字B2-20210191
工商网监
湘ICP备2023018690号
2904
评论
淘帖
2299
