[资料]

Design Note for DN06009/D

2009-11-20 09:04:04 3092

0 Design Note for DN06009/D 5W,CCCV Cell Phone Battery Charger This circuit presents a very simple, low cost, yet highly effective 5 watt, off-line constant current – constant voltage battery charger for cell phones or similar applications. The circuit is designed around ON’s NCP1014 integrated controller with internal mosfet in a discontinuous mode flyback topology. Current and voltage feedback are accomplished with a single optocoupler as well as providing ac mains isolation. The circuit provides a respectable output V/I load-line characteristic for battery charging over typical temperature variations. The use of an auxiliary Vcc winding on T1, although not required because of the 1014’s DSS circuitry, guarantees very low standby (no load) power consumption (< 300 mW). For maximum simplicity a half-wave input rectifier (D1) is utilized and a conducted EMI filter is provided by C1 and L1. If there are very low output line frequency ripple and/or low ac input constraints, a full bridge input rectifier is recommended. The T1 flyback transformer design is compliant enough for output voltage requirements from 4 to 6.5 volts. 6QkFn1Rz.pdf (55.22 KB, 下载次数: 0 ) [/hide] 0 IkQLhOEj.jpg (52.61 KB, 下载次数: 7)
举报淘帖0 只看该作者相关推荐 • 低功耗恒压输出降压电源转换器DN05058/D 1590 • DN05029 / D，Design Note描述了一种简单，低成本，高性能的离线正激转换器电源 1890 • DN05079 / D，Design Note提供了一种简单，适用于任何电源电压或频率的交流LED照明解决方案 1764 • DN05100D 45 W Type-C QC-2.0电源适配器解决方案设计说明 1832 • 45 W Type-C PD-2.0电源适配器解决方案设计说明 3163 • 32 W Type-C接口QC-3.0适配器解决方案设计说明 2820 • Altium Design：Getting Started with PCB Design 15406 • PCB设计规范 PCB Design Guidelines Application Note 16428 • Design Note for DN06018/D 2530 • DN06062/D pdf学习资料 3041