资料下载
基于TQM879006A下的1.4 −2.7 GHz ¼ W Digital Variable Amplifier
分享资料个
Applications
• 3G / 4G Wireless Infrastructure
• CDMA， TD-CDMA， WCDMA， LTE
• Repeaters • PTP Radio IF Chains
Product Features
• 1.4-2.7 GHz Frequency Range
• 31.7 dB Maximum Gain at 2 GHz
• 31.5 dB Gain Range in 0.5 dB Steps
• +43 dBm Output IP3
• +24.5 dBm Output P1dB
• 1.5 dB Noise Figure at Max. Gain State
• Fully Internally Matched Module
• Integrated Blocking Capacitors， Bias Inductors
• 3-wire SPI Control Programming
General Description
The TQM879006A is a digital variable gain amplifier （DVGA） featuring high linearity over the entire gain control range. The amplifier module features the integration of a low noise amplifier gain block， a digitalstep attenuator （DSA）， along with a high linearity ¼W amplifier. The module has the added features of integrating all matching components with bias chokes and blocking capacitors. The internal DSA offers 0.5 dB step， 6-bit， and 31.5 dB range and is controlled with a serial periphery interface （SPITM）。 The TQM879006A features variable gain from 0 dB to 31.7 dB at 2 GHz， has +43 dBm Output IP3， and +24.5 dBm P1dB.
The amplifier also has a very low 1.5 dB Noise Figure （at maximum gain） allowing it to be an ideal DVGA for both receiver and transmitter applications. The amplifier operates from a single +5V supply and is available in a compact 28-pin 6x6 mm leadless SMT package.
The TQM879006A is pin compatible with the TQM829007 （0.6-1GHz， 0.25W DVGA） and TQM879008 （1.5-2.7 GHz， 0.5W DVGA）。 This allows one to size the right type of device for specific system level requirements as well as making the DVGA family ideal for applications where a common PCB layout is used for different frequency bands.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表德赢Vwin官网 网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
- 相关下载
- 相关文章
