德赢Vwin官网
App
发帖 
提问 
发资料
发视频资料介绍
The flash boot loader code is executed every time the part is powered on or reset. The
loader can execute the ISP command handler or pass execution to the user application
code.
A LOW level, after reset, at the P0.14 pin is considered as the external hardware request
to start the ISP command handler. The boot loader samples this pin during reset.
Assuming that proper signal is present on X1 pin when the rising edge on RST pin is
generated, it may take up to 3 ms before P0.14 is sampled and the decision on whether to
continue with user code or ISP handler is made. If P0.14 is sampled LOW and the
watchdog overflow flag is set, the external hardware request to start the ISP command
handler is ignored. If there is no request for the ISP command handler execution (P0.14 is
sampled HIGH after reset), a search is made for a valid user program. If a valid user
program is found then the execution control is transferred to it. If a valid user program is
not found, the auto-baud routine is invoked.
Pin P0.14 is used as hardware request for ISP requires special attention. Since P0.14 is in
high impedance mode after reset, it is important that the user provides external hardware
(a pull-up resistor or other device) to put the pin in a defined state. Otherwise unintended
entry into ISP mode may occur.
loader can execute the ISP command handler or pass execution to the user application
code.
A LOW level, after reset, at the P0.14 pin is considered as the external hardware request
to start the ISP command handler. The boot loader samples this pin during reset.
Assuming that proper signal is present on X1 pin when the rising edge on RST pin is
generated, it may take up to 3 ms before P0.14 is sampled and the decision on whether to
continue with user code or ISP handler is made. If P0.14 is sampled LOW and the
watchdog overflow flag is set, the external hardware request to start the ISP command
handler is ignored. If there is no request for the ISP command handler execution (P0.14 is
sampled HIGH after reset), a search is made for a valid user program. If a valid user
program is found then the execution control is transferred to it. If a valid user program is
not found, the auto-baud routine is invoked.
Pin P0.14 is used as hardware request for ISP requires special attention. Since P0.14 is in
high impedance mode after reset, it is important that the user provides external hardware
(a pull-up resistor or other device) to put the pin in a defined state. Otherwise unintended
entry into ISP mode may occur.
下载该资料的人也在下载
下载该资料的人还在阅读
更多 >
- LPC2000读写EEPROM
- LPC12XX FLASH源码
- 基于NXP LPC2000的次级启动加载程序解析 1次下载
- LPC2000系列的ARM参考价格 8次下载
- LPC2200_flash内部Flash和外部Flash分散加载 16次下载
- 飞得浦LPC2000系列微处理器介绍 11次下载
- LPC2000系列ARM参考价格 18次下载
- LPC2000系列ARM参考价格 46次下载
- NXP单片机选型指南(英文版) 0次下载
- LPC2000系列单片机学习指导书(英文)
- LPC2000系列ARM硬件结构
- LPC2000系列的CAN总线验收滤波器应用
- LPC2300/LPC2400 TCP/IP Overvie
- AN10302
- LPC2000 pdf datasheet
- NAND Flash和NOR Flash的区别 1957次阅读
- FLASH器件特性 FLASH操作的电路原理详解 7467次阅读
- 一文了解SPI NAND Flash和SPI NOR Flash的区别 6319次阅读
- 使用Flash Magic工具烧录LPC系列MCU（UART/USB/SWD接口） 1w次阅读
- 不想告别Flash？教你如何继续使用Flash 1w次阅读
- 米尔科技NXP LPC1857 LPC1850 Cortex-M3开发板概述 4170次阅读
- 基于lpc1768的系统时钟设计 2918次阅读
- NOR flash和flash有什么不一样？ 1.1w次阅读
- SPI flash如何运行程序，SPI flash有哪些应用 1.8w次阅读
- SPI flash是什么,关于SPI FLASH的读写问题 10.3w次阅读
- 对lpc2000系列微控制器片内flash编程的方法 6203次阅读
- nxp单片机汇总_lpc单片机选型 1.8w次阅读
- lpc54102的特性 1869次阅读
- lpc54102引脚图_lpc54102引脚说明 2083次阅读
- 从Flash和SRAM中触发中断的过程示例 2767次阅读
上传资料赚积分下载排行
本周
- 1TC358743XBG评估板参考手册
- 1.36 MB | 330次下载 | 免费
- 2开关电源基础知识
- 5.73 MB | 11次下载 | 免费
- 3嵌入式linux-聊天程序设计
- 0.60 MB | 3次下载 | 免费
- 4DIY动手组装LED电子显示屏
- 0.98 MB | 3次下载 | 免费
- 5基于FPGA的C8051F单片机开发板设计
- 0.70 MB | 2次下载 | 免费
- 651单片机窗帘控制器仿真程序
- 1.93 MB | 2次下载 | 免费
- 751单片机PM2.5检测系统程序
- 0.83 MB | 2次下载 | 免费
- 8基于51单片机的RGB调色灯程序仿真
- 0.86 MB | 2次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 2555集成电路应用800例(新编版)
- 0.00 MB | 33566次下载 | 免费
- 3接口电路图大全
- 未知 | 30323次下载 | 免费
- 4开关电源设计实例指南
- 未知 | 21549次下载 | 免费
- 5电气工程师手册免费下载(新编第二版pdf电子书)
- 0.00 MB | 15349次下载 | 免费
- 6数字电路基础pdf(下载)
- 未知 | 13750次下载 | 免费
- 7电子制作实例集锦 下载
- 未知 | 8113次下载 | 免费
- 8《LED驱动电路设计》 温德尔著
- 0.00 MB | 6656次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935054次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537798次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420027次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191186次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183279次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138040次下载 | 免费
工商网监
评论