MAXQ7670 pdf datasheet (CAN接口的

The MAXQ7670 is a highly in tegrated solu tion f ormeasuring multiple analogsignals and outputting the results on a control area network ( CAN) bus. The dev ice operates from a single 5V supply and incorporates a high-pe rformance, 16-bit reduced instruction set computing ( RISC) core, a SAR ADC, and a CAN 2.0B controller supporting transfer rates up to 1Mbps. The 10-bit SAR ADC includes an amplifier with prog rammable g ains of 1V/V or 16V/V, 8 input channels, and conve rsion rates up to 250ksps. The eight single-ended ADC inputs can be configured as four unipolar or bipolar, fully differential inputs. For single-supply operation, the external 5V supply powers the digital I/Os and two separate integrated linearregulators that supply the 2.5V digital core and the 3.3V analog circuitry. E ach supply rail has a dedicated power-supply supervisor that provides brownout detection and power-on reset (POR) functions. The 16-bit RISC microcontroller (μC) includes 64KB (32K x 16) of nonvolatile program/data flash and 2KB (1K x 16) of data RAM. Other features of the MAXQ7670 include a 4-wire SPI™ interface, a JTAG interface for in-system programming and debugging, an integrated 15MHz RC oscillator, external crystal oscillator support, a timer/counter with PWM capability, and seven GPIO pins with interrupt and wake-up capability.

The system-on-a-chip (SoC) MAXQ7670 is a μC-based, smart data acquisition system. As a member of the MAXQ® family of 16-bit, RISC μCs, the MAXQ7670 is ideal for low-cost, low-power, embedded-applications such as automotive, industrial controls, and building automation. The flexible, modular architecture used in the MAXQ μCs allows development of targeted products for specific applications with minimal effort.

The MAXQ7670 is available in a 40-pin, 5mm x 5mm TQFN package, and is specified to operate over the -40°C to +125°C automotive temperature range.