资料介绍
The MAX5978 hot-swap controller provides complete protection for systems with a supply voltage from 0 to 16V. The device includes four programmable LED outputs.
The IC provides two programmable levels of overcurrent circuit-breaker protection: a fast-trip threshold for a fast turn-off, and a lower slow-trip threshold for a delayed turn-off. The maximum overcurrent circuit-breaker threshold range is set with a trilevel logic input (IRNG), or by programming through the I²C interface.
The IC is an advanced hot-swap controller that monitors voltage and current with an internal 10-bit ADC, which is continuously multiplexed to convert the output voltage and current at 10ksps. Each 10-bit sample is stored in an internal circular buffer so that 50 past samples of each signal can be read back through the I²C interface at any time or after a fault condition.
The device includes five user-programmable digital comparators to implement overcurrent warning and two levels of overvoltage/undervoltage detection. When measured values violate the programmable limits, an external active-low ALERT output is asserted. In addition to the active-low ALERT signal, the IC can be programmed to deassert the power-good signal and/or turn off the external MOSFET.
The IC features four I/Os that can be independently configured as general-purpose input/outputs (GPIOs) or as open-drain LED drivers with programmable blinking. These four I/Os can be configured for any mix of LED driver or GPIO function.
The device is available in a 32-pin thin QFN-EP package and operates over the -40°C to +85°C extended temperature range.
The IC provides two programmable levels of overcurrent circuit-breaker protection: a fast-trip threshold for a fast turn-off, and a lower slow-trip threshold for a delayed turn-off. The maximum overcurrent circuit-breaker threshold range is set with a trilevel logic input (IRNG), or by programming through the I²C interface.
The IC is an advanced hot-swap controller that monitors voltage and current with an internal 10-bit ADC, which is continuously multiplexed to convert the output voltage and current at 10ksps. Each 10-bit sample is stored in an internal circular buffer so that 50 past samples of each signal can be read back through the I²C interface at any time or after a fault condition.
The device includes five user-programmable digital comparators to implement overcurrent warning and two levels of overvoltage/undervoltage detection. When measured values violate the programmable limits, an external active-low ALERT output is asserted. In addition to the active-low ALERT signal, the IC can be programmed to deassert the power-good signal and/or turn off the external MOSFET.
The IC features four I/Os that can be independently configured as general-purpose input/outputs (GPIOs) or as open-drain LED drivers with programmable blinking. These four I/Os can be configured for any mix of LED driver or GPIO function.
The device is available in a 32-pin thin QFN-EP package and operates over the -40°C to +85°C extended temperature range.
下载该资料的人也在下载
下载该资料的人还在阅读
更多 >
- Hot Swap Controllers
- Hot Swap Controllers
- High Power Hot Swap Controllers
- MAX15091,MAX15091A数据资料 16次下载
- MAX15090,MAX15090A数据资料 16次下载
- MAX5977A,MAX5977B数据资料 15次下载
- MAX5976/MAX5976A/MAX5976B,pdf
- TPS2300,TPS2301,pdf(Dual Hot-S
- TPS2311,TPS2310,pdf(Dual Hot-S
- TPS2320,TPS2321,pdf(Dual Hot-S
- TPS2330,TPS2331,pdf(Single Hot
- MAX5970,pdf (0V to 16V, Dual H
- ADM4210,datasheet,pdf(Hot Swap
- MAX5930A/MAX5931A/MAX5931B pdf
- MAX5927A/MAX5929 pdf
- 松下Smart Projector Control App手机配置无线控制使用介绍 459次阅读
- MCUboot Swap模式升级的流程和注意事项 440次阅读
- 如何在linux系统配置交换分区(swap)呢? 1066次阅读
- OTA的swap Bank AB升级方案 1591次阅读
- 扒一扒PCIe中的Flow Control 1993次阅读
- 微软提出Control-GPT:用GPT-4实现可控文本到图像生成! 708次阅读
- 热插拔技术的详细讲解 2.3w次阅读
- 基于PCI9656和MAXII EPM1270实现数据接收卡的应用方案 2600次阅读
- 什么是Swap分区 NVMe上如何使用Swap分区 4085次阅读
- 什么是SWaP?一些直接影响SWaP的重大成就 1.5w次阅读
- Flow Control机制可以显著地提高总线的传输效率 6980次阅读
- PCIe总线必须要先完成Flow Control初始化 7779次阅读
- 采用Flow Control机制的PCIe总线 5711次阅读
- MAX5970应用电路 2656次阅读
- 亮度控制小灯电路--Brightness Control f 3707次阅读
下载排行
本周
- 1TC358743XBG评估板参考手册
- 1.36 MB | 330次下载 | 免费
- 2开关电源基础知识
- 5.73 MB | 11次下载 | 免费
- 3嵌入式linux-聊天程序设计
- 0.60 MB | 3次下载 | 免费
- 4DIY动手组装LED电子显示屏
- 0.98 MB | 3次下载 | 免费
- 5基于FPGA的C8051F单片机开发板设计
- 0.70 MB | 2次下载 | 免费
- 651单片机窗帘控制器仿真程序
- 1.93 MB | 2次下载 | 免费
- 751单片机PM2.5检测系统程序
- 0.83 MB | 2次下载 | 免费
- 8基于51单片机的RGB调色灯程序仿真
- 0.86 MB | 2次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 2555集成电路应用800例(新编版)
- 0.00 MB | 33566次下载 | 免费
- 3接口电路图大全
- 未知 | 30323次下载 | 免费
- 4开关电源设计实例指南
- 未知 | 21549次下载 | 免费
- 5电气工程师手册免费下载(新编第二版pdf电子书)
- 0.00 MB | 15349次下载 | 免费
- 6数字电路基础pdf(下载)
- 未知 | 13750次下载 | 免费
- 7电子制作实例集锦 下载
- 未知 | 8113次下载 | 免费
- 8《LED驱动电路设计》 温德尔著
- 0.00 MB | 6656次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935054次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537798次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420027次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191186次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183279次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138040次下载 | 免费
评论
查看更多