1 ADT74xx-ADT73xx mbed示例-电子电路图,电子技术资料网站 - 德赢Vwin官网

德赢Vwin官网 App

硬声App

0
  • 聊天消息
  • 系统消息
  • 评论与回复
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心

完善资料让更多小伙伴认识你,还能领取20积分哦,立即完善>

3天内不再提示
vwin889
德赢Vwin官网 网>电子资料下载>类型>参考设计>ADT74xx-ADT73xx mbed示例

ADT74xx-ADT73xx mbed示例

2021-03-23 | pdf | 240.89KB | 次下载 | 3积分

资料介绍

This version (03 Jan 2021 21:48) was approved by Robin Getz.The Previously approved version (26 Mar 2020 06:04) is available.Diff

EV-TempSense-ARDZ Mbed Example

The EV-Tempsense-ARDZ Mbed support software can be used as a starting point for developing your own code for Analog Devices EV-TempSense-ARDZ board in your own environment utilizing the benefits of the Mbed platform. Analog Devices is an MBED Partner and develops code on the platform for multiple products. The Analog Devices Mbed code-repo can be found in the links below.

This guide will focus on the Analog Devices SDP-K1 controller board, as it is directly compatible with the TempSense evaluation board and is an MBED-Enabled device. Customers are of course, not limited to using the SDP-K1 board for code development, given that any ARM-based, MBED-enabled board that satisfies a small set of requirements can use the provided code and it will work with only minor changes to the source (see below).

It is further assumed that SDP-K1 board will be connected to the appropriate ADT74XX/ADT73XX eval-board such as the EV-TempSense-ARDZ Evaluation board which has the ADT7320 (SPI) and ADT7420 (I2C) built in with the ability to connect external sensor via headers on the board.

Useful Links

EV-TempSense-ARDZ Mbed Software

For developing firmware code for controller boards on the Mbed platform go the link below.

EV-TempSense-ARDZ code on Mbed

Introduction

At this time Analog Devices supports Mbed code development only on the Mbed online-compiler. See here for instructions on setting up an account and using the compiler. Analog Devices may, at a later date support other offline-IDE's. This guide focuses on the SDP-K1, connected to the EV-Tempsense-ARDZ board, but it should be general enough to cover any compatible controller board (the controller board should be Mbed-enabled, and expose at least SPI or I2C and some GPIO's).

The software described below allows for an Mbed enabled controller board to be connected with an Analog Devices evaluation board. Unmodified, the code will communicate over any serial terminal emulator (CoolTerm, putty, etc) using the UART provided by the controller board over USB.

The software provides a basic user-interface for interacting with the evaluation-board. All the main functionality of the ADT73XX (SPI) and ADT74XX (I2C) is provided in the application-code in abstracted form and the user is free to customize the software to suit their own needs for working with the sensors

Quick Start

If you have some familiarity with the Mbed platform, the following is a basic list of steps required to start running the code, see below for more detail.

  • Connect the evaluation-board to the Mbed-enabled controller board.
  • Connect the controller board to your computer over USB.
  • Go to the code for this product in the Mbed compiler.
  • Ensure your controller board is selected (top right of online-compiler page)
  • Edit app_config.h to (defaults to SDP connector)
    • Enable the Arduino Header if you are not using the SDP connector. Do this by uncommenting #define ARDUINO in app_config.h
  • Compile the code.
  • After a successful compile a binary will be downloaded to your computer - store this somewhere.
  • Drag and drop this binary to the USB drive hosted by your controller board.
  • Start up a terminal emulator,
    • Find the com-port your controller board is connected on and select it.
    • Set the baud-rate for 115200 - other defaults should be fine.
    • Reset the controller board and connect.
  • Use the menu provided over the terminal window to access the evaluation board.

User Guide

Getting Started

The SDP-K1 board has two ways to connect to the EVAL-TempSense-ARDZ board, it can use the 120-pin SDP connector on the underside of the board, or the Arduino connector can be used.

The Getting Started with Mbed page describes the Arduino Uno Header, the SDP connector, pin-outs and other information related to understanding the SDP-K1 controller board.

Hardware Setup

Connecting the EV-TempSense evaluation board using the SDP connector on the K1 is the simplest and most convenient way to get up and running quickly, simply mate the two boards to together.

If using the Arduino header pins, compile the software only after uncommenting the #define ARDUINO in app_config.h

Connecting Remote Sensors

The EV-TempSense-ARDZ board supports remote ADT74XX and ADT73XX devices. These can be connected to pins at the top of the eval board using ribbon cables or jumper wires, these pins are marked in the image below. SPI devices (EVAL-ADT7320-MBZ) and I2C devices (EV-ADT7420-MBZ) connect to their respective header pins by matching the pins on the board to those labelled on the remote board.

There is no need to adjust the source code to start using the remote sensors. Selecting these devices can be done within the provided application which is described below.

Compiling and flashing firmware

ARM provide a guide to setting-up and using their online-compiler here. For the SDP-K1 the following guide can also be used to help understand the process. Specifically for the EVAL-TempSense-ARDZ evaluation board and the SDP-K1, the following steps can be used.

Go here to find the EV-TempSense-ARDZ firmware example.

EV-TempSense-ARDZ

  • Connect your controller board to your computer - your mbed-enabled board will show as a USB drive.
  • Import into your online compiler workspace by clicking the Import into Compiler button.
  • Select the newly imported program, and select your controller board (e.g. SDP-K1) - see the links above if this process is new to you.
  • Click the compile button
  • When compile is completed a .bin file will be downloaded to your system.
  • Drag and drop the binary file to your USB drive, this will flash the binary to your board.

Using the Software

The firmware is delivered as a basic, text-based user-interface that operates through a UART on the controller board using the same USB cable that is used to flash the firmware to the boards. Any terminal-emulator should work, but it is not possible for Analog Devices to test every one. It is necessary to connect a serial terminal-emulator to interact with the running firmware.

Here CoolTerm is used as an example, Analog Devices does not endorse any particular program for this, but CoolTerm works well and is made freely available, other terminals such as Tera Term, or PuTTY will work.

Set the baud-rate for 115200 and select the connected controller board’s COM port. If using CoolTerm you should be able to keep the defaults, however adjustments may need to be made to how carriage return (CR) is handled in order for everything to display correctly.

The software is designed to be straight forward to use, and requires little explanation. Simply select which interface (SPI/I2C) you would like to use, whether you want to use the internal sensor or a remote one and then simply enter a number corresponding to the required command and follow the on-screen prompts. The code is also written with a view to keeping things simple, you do not have to be a coding-ninja to understand and expand upon the delivered functions.

It is hoped that the most features of the ADT73XX and ADT74XX are coded, but it's likely that some special functionality is not implemented.

Feel free to consult Analog Devices Engineer-Zone for feature requests, feedback, bug-reports etc. My test.
下载该资料的人也在下载 下载该资料的人还在阅读
更多 >

评论

查看更多

下载排行

本周

  1. 1电子电路原理第七版PDF电子教材免费下载
  2. 0.00 MB  |  1491次下载  |  免费
  3. 2单片机典型实例介绍
  4. 18.19 MB  |  95次下载  |  1 积分
  5. 3S7-200PLC编程实例详细资料
  6. 1.17 MB  |  27次下载  |  1 积分
  7. 4笔记本电脑主板的元件识别和讲解说明
  8. 4.28 MB  |  18次下载  |  4 积分
  9. 5开关电源原理及各功能电路详解
  10. 0.38 MB  |  11次下载  |  免费
  11. 6100W短波放大电路图
  12. 0.05 MB  |  4次下载  |  3 积分
  13. 7基于单片机和 SG3525的程控开关电源设计
  14. 0.23 MB  |  4次下载  |  免费
  15. 8基于AT89C2051/4051单片机编程器的实验
  16. 0.11 MB  |  4次下载  |  免费

本月

  1. 1OrCAD10.5下载OrCAD10.5中文版软件
  2. 0.00 MB  |  234313次下载  |  免费
  3. 2PADS 9.0 2009最新版 -下载
  4. 0.00 MB  |  66304次下载  |  免费
  5. 3protel99下载protel99软件下载(中文版)
  6. 0.00 MB  |  51209次下载  |  免费
  7. 4LabView 8.0 专业版下载 (3CD完整版)
  8. 0.00 MB  |  51043次下载  |  免费
  9. 5555集成电路应用800例(新编版)
  10. 0.00 MB  |  33562次下载  |  免费
  11. 6接口电路图大全
  12. 未知  |  30320次下载  |  免费
  13. 7Multisim 10下载Multisim 10 中文版
  14. 0.00 MB  |  28588次下载  |  免费
  15. 8开关电源设计实例指南
  16. 未知  |  21539次下载  |  免费

总榜

  1. 1matlab软件下载入口
  2. 未知  |  935053次下载  |  免费
  3. 2protel99se软件下载(可英文版转中文版)
  4. 78.1 MB  |  537793次下载  |  免费
  5. 3MATLAB 7.1 下载 (含软件介绍)
  6. 未知  |  420026次下载  |  免费
  7. 4OrCAD10.5下载OrCAD10.5中文版软件
  8. 0.00 MB  |  234313次下载  |  免费
  9. 5Altium DXP2002下载入口
  10. 未知  |  233046次下载  |  免费
  11. 6电路仿真软件multisim 10.0免费下载
  12. 340992  |  191183次下载  |  免费
  13. 7十天学会AVR单片机与C语言视频教程 下载
  14. 158M  |  183277次下载  |  免费
  15. 8proe5.0野火版下载(中文版免费下载)
  16. 未知  |  138039次下载  |  免费