Adding Diagnostic Capability t

Abstract: A cost-effective procedure for adding system diagnostic, product diagnostic, output drift check, auto-zeroing capability, etc., to your products which are based on the MAX1478, MAX1452, MAX1455, MAX1457, and MAX1463 family of high-performance signal conditioning products without changing the test system or adding significant time to the calibration process.

This approach takes advantage of built-in nonvolatile flash memory included in these low-cost signal conditioners. The concept is implemented by making an accurate measurement of the output voltage at predefined reference conditions and storing it in the flash memory for future reference.

This application note describes a simple and cost-effective procedure for adding diagnostic checks to determine product functionality and sensor output drift. This enhancement can be added to any MAX14XX device with nonvolatile memory without changing the test system or adding significant time to the calibration operation.

MAX14XX signal-conditioning devices are generally used in conjunction with pressure sensors to correct their inherently large temperature error. Although the same principle applies to other types of sensors, this document refers solely to pressure-sensor applications for the sake of simplicity.

Benefits of Adding Diagnostic Capability

Checking the functionality of the signal-conditioning device.
Indicating the level of error after calibration.
Indicating drift in the sensor output. This is desirable especially in the case of absolute-pressure sensors, because loss of reference vacuum can cause output drift, which may not be easily detectable after calibration.
Verifying proper functioning and troubleshooting the test system. Changes in output voltage in the reference condition could provide hints of inaccurate pressure setting, incorrect VDD, malfunctioning ASIC, etc.

Overview

Maxim's MAX14XX series of smart signal-conditioning products include nonvolatile memory that can be used to store product-run information and calibration values. Once the device is calibrated, the output voltage (VCAL) of the device should be measured under reference conditions and the value of VCAL written to memory. Reference temperature and pressure conditions should be chosen to minimize the influence of the test system on the reference conditions. For gage-pressure devices, reference conditions are usually room temperature and atmospheric pressure. For highly accurate products, room temperature may need to be controlled and atmospheric pressure measured independently. When it comes to absolute-pressure sensors, a repeatable reference pressure must be chosen (it may not be atmospheric pressure).

Reference Temperature

Controlling the reference temperature is especially necessary for devices with a large temperature coefficient. To minimize the overhead associated with the generation of VCAL, the last calibration temperature can be used as the reference. A reasonable choice is 25°C, because it is easy to achieve and control and it is used as the reference for most specifications.

Reference Pressure

For gage-pressure sensors, use atmospheric pressure.
For absolute-pressure sensors, absolute (not gage) pressure must be used and controlled to the desired accuracy. To minimize the effect of any possible leak in the system, a pressure close to the atmospheric pressure is recommended (100kPA).
For high-pressure sensors, atmospheric pressure can be used.

Procedure for Setting Up Reference Voltage

Complete the compensation/calibration as this is normally done.
Apply the reference pressure and the temperature condition to the device.
Read the output voltage to the desired accuracy.
Store the output voltage, VCAL, in the memory.

Procedure for Using Reference Voltage

Apply the reference condition to the device.
Measure the output voltage, Vout.
Read VCAL from memory.
Compare the VOUTand VCAL values, dVOUT = VOUT- VCAL.
Take any specified action based on the value of dVOUT. For example, shut down the system, call the operator, ignore the device output, etc.

阅读全文

MAX14XX(5231) MAX14XX(5231)

DCM是什么？DCM在AUTOSAR中的位置

DCM全称Diagnostic Communication Manager，它位于AUTOSAR基础软件的服务层，它的主要作用是为开发和生产阶段提供与诊断仪交互的诊断服务。

2023-07-08 16:41:56

4205

Adding items to hidden VCC

使用AD时遇到这个问题：Adding items to hidden VCC，现在还不知道怎样解决

2016-02-26 21:58:13

T0T1定时器

单片机中T0用于定时满60后T1开始计数，程序应该怎样写，我每次都只有T0在跑，

2013-08-24 16:00:13

adding-haptic-effects-to-your-android-application

adding-haptic-effects-to-your-android-application

2013-05-16 15:52:26

AMD超威半导体一揽子热招职位分享；请有意向者将简历发送到 [email]Cherry.Zhang

Integration EngineerSr/MTS Front End Integration EngineerSr./MTS BIOS EngineerSenior Framework Diagnostic software EngineerDFT engineer

2017-02-15 15:03:49

CCIX 1.1设备必须支持PCIe 5.0 PHY或CCIX EDR PHY这两种物理层吗

层DVSEC（Designated Vendor-Specific Extended Capability）6.1 概述指定供应商特定扩展功能（DesignatedVendor-Specific

2022-08-16 15:45:06

Codec Engine的编译问题

directory. Adding codec 'viddec_copy' (ti.sdo.ce.examples.codecs.viddec_copy.VIDDEC_COPY), scratch

2018-06-21 12:41:13

DMA的链接器错误

compiled and linked fine.Now I am adding ECAN and DMA functionality, and having problems linking

2019-03-29 10:41:59

DSP仿真器驱动安装错误导致的报错及处理

Cancel:Remain disconnected from the target Diagnostic:Run diagnostic utility. 选择“retry”出下面报错信息

2018-08-17 04:50:07

ESP32S2添加IOT组件的配置出错的原因？如何解决？

;lvgl_example" version: 1-- Adding linker script C:/Users/xuyux/Desktop/esp-idf/components/esp_rom

2023-03-09 08:38:43

MSOX3014T 回收MSOX3014T

全国回收是德MSOX3014T 示波器东莞市诺展电子仪器有限公司1.高价回收倒闭工厂仪器，整批或单出，专业评估2.高价回收工厂闲置仪器，变废为宝帮您资金回笼3.高价回收个人处理仪器，全国任意地可物流

2020-02-27 14:49:37

ORCAD16.6 仿真就显示Voltage source and/or inductor loop involving L_L9. You may break the loop by adding a series resistance

这是我的电路图，仿真就显示Voltage source and/or inductor loop involving L_L9. You may break the loop by adding a series resistance。请各位大虾相助。

2018-03-25 22:16:31

OTA升级失败的原因？

硬件:esp32 dwodidf v4.4参照例子:native_ota_example写的ota程序，升级完成后，重启进入: const esp_partition_t *running

2023-02-10 08:55:18

SlIpReleasedAsync_t&SlIpLeasedAsync_t疑問

]; _u16 padding; ]SlIpLeasedAsync_t; typedef struct [ _u32 ip_address; _u8 mac[6]; _u16 reason; ]SlIpReleasedAsync_t; ＿

2018-06-07 01:25:56

Using the ATF1500(A) CPLD

flip-flops or t ransparentlatches. Register controls can be individuallyselected between global pins

2009-05-13 10:09:39

_c_int00 中的 ESM group3有错误产生，esmREG->SR1[2] == 2 。请问这是什么错误？

BEGIN (24) */ /* USER CODE END */ /*SAFETYMCUSW 5 C MR:NA"for(;;) can be removed by adding "

2018-06-21 03:46:42

ccs5.4安装失败信息

:27:31PM - F:\download\CCS5.4.0.00091_win32/baserepo/arm_mpu.txt doesn't exist 08/07/2013 17:27:31PM

2018-06-21 18:08:56

esp-idf-tools-setup-offline-4.4.2 win7安装的问题求解

Git in C:\Espressif\tools\idf-git\2.34.2\cmdgit version 2.34.1.windows.1Setting IDF_PATH:Adding

2023-02-10 08:03:28

esp-idf-tools-setup-offline-4.4.2 win7安装的问题求解

Git in C:\Espressif\tools\idf-git\2.34.2\cmdgit version 2.34.1.windows.1Setting IDF_PATH:Adding

2023-03-08 08:57:30

esp-idf-tools-setup-offline-4.4.2 win7安装错误是何原因？

Git in C:\Espressif\tools\idf-git\2.34.2\cmdgit version 2.34.1.windows.1Setting IDF_PATH:Adding

2023-03-03 07:05:56

esp32 OTA升级确定运行分区时重启的原因？

硬件:esp32 dwodidf v4.4参照例子:native_ota_example写的ota程序，升级完成后，重启进入: const esp_partition_t *running

2023-03-08 06:06:03

ssize_t与size_t的区别

ssize_t与size_t的区别：http://bbs.edu118.com/forum.php?mod=viewthread&tid=547&fromuid=231(出处: 信盈

2017-08-29 09:46:59

tds/xds 510-u***2.0仿真器连接问题

安装了tds/xds u***2.0驱动，但不管连接tds仿真器还是xds仿真器，电脑上均显示的是xds510 的设备。每次打开CCS3.3进行连接仿真器的操作时，都会提示下面的错误：an't

2016-04-07 10:33:33

【九联科技Unionpi Tiger开发板试用体验】ROS noteic rs485实时读取th10s

; diag_count_ = 0; diagnostic_updater_.update();}}uint16_t Th10sUart::check_crc(const

2022-10-19 18:25:48

中国人打造的开源RTOS，MonkeyKing v1.0 发布

hooks facilities, such as task creation, deletion and task switching User stack diagnostic CPU usage

2009-11-12 20:53:01

为E5515B和E5515C E5515-90310增加了EGPRS功能

Installation note for adding EGPRS capability to the E5515B and E5515C

2019-09-18 09:24:34

为E5515B或E5515C添加附加功能

Installation note for adding additional capability to the E5515B or E5515C

2019-09-30 14:13:29

为E5515C添加扩展频率功能

Installation note for adding Extended Frequency Capability to the E5515C

2019-10-12 10:14:20

什么原因导致OTA升级毫无征兆的重启呢?

硬件:esp32 dwodidf v4.4参照例子:native_ota_example写的ota程序，升级完成后，重启进入: const esp_partition_t *running

2023-03-03 06:44:59

使用C＃编写34970A应用程序收到错误该怎么办？

via RS232,but i'm getting an error saying that Visual Studio can't find the reference VisaComLib.I've

2019-08-01 13:13:56

信号与系统与maltab求用matlab画出矩形信号 x(t)=u(t)-u(t-2)

如题求用matlab画出矩形信号x(t)=u(t)-u(t-2)

2012-10-24 16:55:43

关于6455DSK开发板连接问题

昨天订了足足一个半月的6455EVM开发板终于到来，LZ迫不及待的打开那个大箱子试验一下，安装完所有软件和驱动之后，发现DSK6455 Diagnostic Utility这软件检测不到设备，求各位

2018-08-02 07:05:52

具有次序转向动画的汽车LED前灯TIDA-01372技术资料下载

animation with the SEPIC topology, and this design also realizes full automotive diagnostic with low

2018-07-13 09:53:37

北京2913T2903G2915T2922T彩电原理图相关资料推荐

北京2913T/2903G/2915T/2922T彩电原理图文件下载

2021-07-02 06:41:47

向流量计添加近场通信NFC功能的TI设计

描述 This TI Design demonstrates adding Near Field Communications (NFC) capability to flow meters.

2018-12-20 09:34:38

回收MSOX3024T 是德MSOX3024T

全国回收是德MSOX3024T示波器东莞市诺展电子仪器有限公司1.高价回收倒闭工厂仪器，整批或单出，专业评估2.高价回收工厂闲置仪器，变废为宝帮您资金回笼3.高价回收个人处理仪器，全国任意地可物流

2020-02-27 14:56:13

基于TPS61236适用于移动电源USB输出端口的电路设计

port of the power-bank. The reference design features a 5V and 2.4A output capability, auto detection

2018-08-30 08:57:11

增加快速切换功能和提高速度

Install note for adding Fast Switch capability and speed improvement

2019-10-10 08:30:29

如何纠正dcm缓冲区错误

modulebutwhile generating the program file its showing some errorsi tried rectifying this errors by adding buffers but didn't work

2019-07-15 15:03:19

如何解决Altium Designer中Adding items to hidden net GND

最近在做数电的课程设计，在原理图编译的时候出现两个错误：adding items to hidden net GND 和 adding items to hidden net VCC，上网找了各种

2013-06-25 19:48:27

将Wi-Fi连接添加到CAN网络的网关设计包括原理图和BOM

traffic via a web page. This connection can be used for diagnostics or to add the capability to control

2018-08-28 10:20:59

很难检测和连接上C6455 请问是什么原因？

我的是C6455DSK的板子，但是用DSK6455 Diagnostic utility 3.3检测和连接dsp时，总是会连不上，大概要重复十几分钟才可能碰运气脸上，这是为什么？

2018-08-07 08:19:06

报错求助：C28xx_CPU1: Error adding memory map range: invalid page specified

TMS320F28377S，仿真器XDS200，直接加载.out文件，报错信息：C28xx_CPU1: Error adding memory map range: invalid page

2017-10-24 14:19:16

求助创维29T99AA-T图纸

求助创维29T99AA-T图纸，与29T99AA图纸不同，先谢啦！

2010-12-26 21:16:59

求助，想把数据存入SRAM D2域缺什么才能避免Hard fault？

the switch matrix read issuing capability to 1 for the AXI D2 target (Target 2 and INI2) */*((__IO uint32_t

2022-12-30 08:46:31

用于实时衰落的N7605B Signal Studio技术概述

comprehensive diagnostic toolset for designing and verifying wireless signal processing devices.

2018-10-10 09:53:47

画原理图时的问题，求解答

用altium designer 画完原理图编译的时候总是有 adding hidden net vdd及adding items to hidden net gnd的错误，不知道怎么改求解答

2013-04-26 20:37:53

硬件没有内部时钟

is being redesigned to this capability but the question is how does one acquire time and data

2019-08-29 09:22:51

空中基站维护工具概述

The Keysight Technologies E6474A CDMA Over-Air Maintenance Tool is used to make diagnostic

2019-06-27 07:46:05

请问diagnostic测试失败意味着什么？板子有问题？

本帖最后由一只耳朵怪于 2018-6-25 10:50 编辑请问diagnostic测试失败意味着什么？板子有问题？（ps：u***和emulation这两项测试过了）。欢迎赐教，不胜感激。

2018-06-25 02:59:37

请问有能用于安全应用的ST的IC多轨电源吗？

with SPC58NE84E7 MCU. I need a Watchdog and Voltage supervisor throught serial communication for diagnostic task. #safety #spc58

2019-06-25 07:52:35

连续转向动画显示的汽车LED尾灯设计方案含PCB与物料清单

also illustrates full automotive diagnostic with low quiescent current during fault mode.主要特色Automotive

2018-10-31 17:19:27

需要HP 70120A操作和服务手册和CLIP

70120A that I need the Operation and Service manuals and CLIPs for.I need the diagnostic disk

2018-11-01 14:37:16

高度可靠的霍耳传感器接口集成方案

a method for adding diagnostic capabilities and robust protection to automotive and industrial

2008-10-06 14:33:47

HJ2021J 网络变压器

Meets IEEE 802.3u Standards.RoHS Compliant.10/100 Base-T, Surface Mount Type, Open Header.Operating

2021-08-26 12:01:36

Adding Intelligence to Lightin

Adding Intelligence to Lighting Applications -LED Lighting Design Guide LED Lighting ................................................................................................................. 3LED Applications .......

2009-03-18 22:14:15

失效分析集成电路的工具和技术

Failure analysis be defined as a diagnostic process for determining the cause of a failure. It has

2009-07-18 08:49:33

Microscale Diagnostic Techniques

The fields of micro- and nanotechnology have emerged over the past decade as a major focus of modern scientific and engineering research and technology. Driven by advances in microfabrication, the investigation, manip

2009-07-21 09:34:47

TIISOW7741数字隔离器

Isolation rating (Vrms) 5000 Surge voltage capability (Vpk) 10000 Operating t

2022-12-07 14:34:51

LT3050,pdf,datasheet (100mA, L

LT3050 - 100mA, Low Noise, Linear Regulator With Precision Current Limit And Diagnostic Functions特点

2009-09-20 07:32:28

Tiny Universal LED Driver Can

LEDs are the lighting workhorse of cell phones, MP3players and diagnostic lights in telecom

2009-09-30 19:55:10

Open Diagnostic Data Exchange(

Open Diagnostic Data Exchange(ODX) -The future of Diagnostics:Diagnostic Communication vs.

2009-10-06 14:45:03

Adding 32 KB of Serial SRAM to

Although Stellaris microcontrollers have generous internal SRAM capabilities, certain applicationsmay have data storage requirements that exceed the 8 KB limit of the Stellaris LM3S8xx seriesdevices. Since microcontrollers do not have a

2009-11-07 14:04:54

Agilent GS-8210 Wireless Hands

Features and Benefitsx Quad-band test capability x SMS test capability x Six traffic-channel test

2010-07-28 21:25:47

Agilent N2X Ethernet OAM Fault

Key FeaturesEmulate Y.1731 OAM frames over EthernetIncludes diagnostic test pattern

2010-08-04 14:05:18

TLV2370,TLV2371,TLV2372,TLV237

The TLV237x single supply operational amplifiers provide rail-to-rail input and output capability

2010-09-13 20:57:26

TLV2371-Q1,TLV2372-Q1,TLV2374-

The TLV237x single supply operational amplifiers provide rail-to-rail input and output capability

2010-09-13 21:03:22

TLV2381,TLV2382,pdf(Family of

The TLV238x single supply operational amplifiers provide rail-to-rail input and output capability

2010-09-13 21:10:00

TLV27L1,TLV27L2,pdf(Family of

The TLV27Lx single supply operational amplifiers provide rail-to-rail output capability

2010-09-14 07:24:30

MAX1455 Diagnostic Clip Boost

capability, which is very important diagnostic tool in the automotive applications. This feature can detect various failure mode of the transducer

2009-04-20 16:27:03

836

MAX1452 Diagnostic Clip Circui

output to some predefined values, also referred to as output clipping, can serve as an important diagnostic tool. The MAX1455 low-cost high-per

2009-04-20 16:28:55

1512

Adding POR Function to the MAX

The MAX1864 power-supply controller is designed for cost-effective applications such as cable modem consumer premise equipment (CPE), XDSL CPE and set-top boxes. It includes a current mode synchronized step-down controller and two positive

2009-04-29 11:35:31

664

添加诊断能力，以MAX14XX低成本高性能信号调节器-Add

Abstract: A cost-effective procedure for adding system diagnostic, product diagnostic, output drift

2009-05-04 09:51:14

502

Destructive Reset Diagnostic R

Destructive Reset Diagnostic Routine for the MAXQ1103 Abstract: The MAXQ1103 is a secure

2009-07-18 11:09:03

1211

Nano WiReach数据资料

Typical applications: Adding WiFi to serial embedded devices Replacing LAN cable using WiFi Adding SSL security to M2M solutions.

2011-09-29 17:13:56

MAX3051数据资料

in acontroller area network (CAN). The MAX3051 providesdifferential transmit capability to the bus and differentialreceive capability to the C

2012-11-15 12:06:14

I2C微型步进电动机驱动器

/diagnostic interface. It is ready to build intelligent peripheral systems where up to 32 drivers can be connected to one I2C master.

2017-09-07 13:23:45

微步进电机驱动器AMIS30623C6238G

/diagnostic interface. It is ready to build dedicated mechatronics solutions connected remotely with a LIN master.

2017-09-07 13:26:24

插座适配器系统测试方案

Traditional one-piece， clamshell-design test sockets are useful diagnostic tools for establishing or evaluating device functionality.

2017-09-11 17:47:29

MC10XS4200,10兆欧的双高端开关24V

The 10XS4200 device is part of a 24 V dual high side switch product family with integrated control， and a high number of protective and diagnostic functions.

2017-09-19 14:39:36

10兆欧的双高端开关MC10XSD200

The 10XSD200 device is part of a 36 V dual high side switch product family with integrated control， and a high number of protective and diagnostic functions.

2017-09-19 16:03:34