Connecting dual-digit LED modu

Connecting dual-digit LED modules

Abstract: The MAX6954/MAX6955 LED display drivers allow users to drive both individual LED digits and shared segment pins. This application note details what steps must be taken to map the digits properly.

Maxim's MAX6954 and MAX6955 LED display drivers can be used to drive LED digits whose segment pins are individually available. The MAX6954/MAX6955 can also be used to drive dual-digit 7-segment LED modules which feature shared segment pins. Figure 1 shows the internal example configuration of such a device.

Figure 1. Internal configuration of a dual-digit LED module.

Up to eight dual-digit modules or 16 digits can be driven by just one MAX6954 or MAX6955. The following module digit-to-digit mapping is recommended to connect these modules to the MAX6954/MAX6955.

Module1-Digit1 -> Digit 0               DIG1 -> CC00           
Module1-Digit2 -> Digit 1               DIG2 -> CC01           

Module2-Digit1 -> Digit 2               DIG1 -> CC02          
Module2-Digit2 -> Digit 3               DIG2 -> CC03          

Module3-Digit1 -> Digit 4               DIG1 -> CC04           
Module3-Digit2 -> Digit 5               DIG2 -> CC05          

Module4-Digit1 -> Digit 6               DIG1 -> CC06           
Module4-Digit2 -> Digit 7               DIG2 -> CC07          

Module5-Digit1 -> Digit 0a       	DIG1 -> CC00        
Module5-Digit2 -> Digit 1a              DIG2 -> CC01           

Module6-Digit1 -> Digit 2a       	DIG1 -> CC02           
Module6-Digit2 -> Digit 3a     	 	DIG2 -> CC03           

Module3-Digit1 -> Digit 4a              DIG1 -> CC04           
Module3-Digit2 -> Digit 5a              DIG2 -> CC05          

Module4-Digit1 -> Digit 6a              DIG1 -> CC06           
Module4-Digit2 -> Digit 7a              DIG2 -> CC07

Table 4, Connection Scheme for Sixteen 7-Segment Digits, in the MAX6954/MAX6955 data sheet explains that digit 0, 1, 2, 3, 4, 5, 6, and 7's segment pins are identified by 1a, 1b, 1c, 1d, 1e, 1f, 1g, and 1dp; digit 0a, 1a, 2a, 3a, 4a, 5a, 6a,and 7a's segment pins are identified by 2a, 2b, 2c, 2d, 2e, 2f, 2g, and 2dp.

The scan limit should be set accordingly by writing the proper number to register 0x03. For this example with all eight modules or 16 digits, the scan-limit register should have a content of 0x07. The scan-limit register content can be changed to 0x03 if only four modules or eight digits are driven. When only half of the modules or digits are used, the module digit-to-digit mapping can be changed to the following.

Module1-Digit1 -> Digit 0               DIG1 -> CC00           
Module1-Digit2 -> Digit 1               DIG2 -> CC01           

Module2-Digit1 -> Digit 2               DIG1 -> CC02          
Module2-Digit2 -> Digit 3               DIG2 -> CC03          

Module5-Digit1 -> Digit 0a       	DIG1 -> CC00        
Module5-Digit2 -> Digit 1a              DIG2 -> CC01           

Module6-Digit1 -> Digit 2a       	DIG1 -> CC02           
Module6-Digit2 -> Digit 3a       	DIG2 -> CC03

阅读全文

led(645463) led(645463)

Dual Beam FIB(双束聚焦离子束)

Dual Beam FIB(双束聚焦离子束)机台能在使用离子束切割样品的同时，用电子束对样品断面(剖面)进行观察，亦可进行EDX的成份分析。iST宜特检测具备超高分辨率的离子束及电子束的Dual

2018-09-04 16:33:22

AD9139-DUAL-EBZ

BOARD EVAL FOR DUAL AD9139

2023-03-30 11:50:48

ADC0809数字电压表显示问题

P2for(k=0;k<1000;k++){/*lighten each LED and equal the below for loopP1=LED[digit[0]]+0x80;P2_4

2013-04-17 09:23:40

AM4378 linux Matrix图像界面中的例程：求dual_camera的源码

因为工程需求，使用parallelable camera接口读取图像，目前使用Linux Matrix图形界面中有自带的测试程序dual_camera，但是源码不清楚。尝试过使用v4l进行读取

2018-05-15 05:12:56

Error connecting to the target: (Error -1170 @ 0x0)

CCS7.3 /CC3220S-LAUNCHPAD: (Error -1170 @ 0x0) Unable to access the DAP) Error connecting

2018-06-21 15:38:33

FPGA模块调用的问题

首先向大神们致敬哈！先附上我的三个模块：1。顶层： module modu (clk50m,rst_n,in,out,clk9600);input clk50m,rst_n,in;output

2013-10-24 23:14:51

GPRS模块卡在TCP CONNECTING

用花生壳的域名能收也能发，换成ip就不行了，家里和公司的固定ip都连不上，一直卡在connecting...#if 0u8 mode=0;//0,TCPá¬½ó;1,UDPá¬½óu8 port

2019-05-28 04:37:10

Gowin I3C Dual Clock IP用户指南及参考设计

本次发布 Gowin I3C Dual Clock IP 用户指南及参考设计。Gowin I3C Dual Clock IP 的用户指南及参考设计可在高云官网下载，其中，参考设计已配置一例特定参数

2022-09-30 06:08:11

Gowin I3C Slave Dual Clock IP用户使用指南

Gowin®I3C Slave Dual Clock IP 用户指南主要内容包括功能特点、端口描述、时序说明、寄存器描述、配置调用、参考设计等，旨在帮助用户快速了解 Gowin I3C Slave Dual Clock IP 的产品特性、特点及使用方法。

2022-09-30 06:56:30

NUC123 SPI如何使用Dual I/O功能？

所使用的板子:NuTiny_NUC123 x 2 功能描述: 當我們使用SPI Flash的時候, 為了加快讀/寫速度, 有支援Dual I/O或是Quad I/O功能的型號是一大優點, 但是

2023-06-21 07:13:14

RT-Thread使用webserver的步骤

#include #include int LED1=0;int BEEP=0;#define NUM_CONFIG_CGI_URIS (sizeof(ppcURLs) / sizeof(tCGI

2023-02-24 14:47:33

VX-501-DUAL

VX-501-DUAL - Base Stations - Vectron International, Inc

2022-11-04 17:22:44

Warning: You are connecting digital power to analog ground.

Warning: You are connecting digital power to analog ground.请问高手们这个问题怎么解决？

2013-09-16 22:32:25

i.MX 7Dual产品数据手册

i.MX 7Dual数据手册

2022-12-13 06:41:09

i.MX 7Dual评估套件资料分享

i.MX 7Dual评估套件宣传手册

2022-12-13 06:57:05

single ram和dual ram的问题

求高手指点，有什么设计方法可以用一个single port ram来实现single dual port ram的功能，外部接口要一样，输出结果要一样；module new_dual ( clka

2014-02-19 09:51:44

为什么LCD显示一直停在USB Connecting？

把原程序的.hex文件下载到板子后，发现LCD显示一直停在 USB Connecting...中，是什么原因呢？程序没有改过的，SD卡8G的，是不是SD卡不支持呢？

2019-07-26 04:35:08

为什么找不到路径 dual_sbl 中的“\boards\<board_name>\dual_sbl\lpc55xx_dsbl_app\cm33_core0\tools”？

找不到路径 dual_sbl 中的“\boards\\dual_sbl\lpc55xx_dsbl_app\cm33_core0\tools”。评估套件：LPC55s69致力于辅助引导加载程序演示

2023-03-21 06:56:47

使用CS+ for CC 烧录 RH850 F1K R7F701581时报Failed in connecting by LPD.Failed in connecting by LPD.

如题：接线确认过没有问题，烧录F1L系列没有问题，换了一个PIN对PIN的的F1K后报Failed in connecting by LPD。然后使用RFP烧录该工程的.mot文件也可以烧录成功。就是使用CS+ 烧录，报连接失败。无法在线调试，有无大佬帮忙看下是怎么回事？

2019-08-19 11:23:25

具有电流均衡功能的汽车日间行车灯双串LED驱动器包括BOM及层图

描述This reference design is a dual string LED driver that implements an operational amplifier based

2018-10-15 15:02:20

在Debug时，出现 Error connecting to the target:

在Debug时，出现Error connecting to the target:(Error -1135 @ 0x0)The emulator reported an error. Confirm

2018-11-13 14:49:26

在用CCS5.5Debug时遇到Error connecting to the target问题

在debug时，出现C28xx:Error connecting to the target:(Error -1135 @ 0x0)The emulator reported an error.

2019-11-06 11:48:23

基于GW1N-4芯片的DUAL BOOT下载方案

为了满足用户对 GW1N-4 FPGA 的 DUAL BOOT 功能需求，在现有芯片下载电路基础上，通过增加少量外部电路实现其功能，考虑不同用户电源设计不同，提供了两种电路形式。通过电路仿真和板级验证该电路均能满足DUAL BOOT 下载需求。

2022-09-28 06:52:39

当大范围结构定点分析观察 Dual-Beam FIB满足不了时怎么办？

一般而言，若是小范围且局部的Cross section分析，我们会建议您使用Dual-Beam FIB，拥有边切边拍，让您快速取得结构图。然而，若是遇到PCB、3D 芯片、硅穿孔结构(TSV

2019-08-15 14:11:25

怎么将5digit BCD转换为BIN

你好，请帮助我一个使用汇编语言的人将5digit BCD转换为BIN 非常感谢以上来自于谷歌翻译以下为原文 hello, please can help me someone one

2019-03-26 15:02:12

怎么通过vivado 2014.3进行编码？

七段显示器的阴极（显示为SSeg_CA）时。我把信号放到LED上，看看它在读什么，我正在读8'b00000000。我已经验证了秒，小时，小时状态正在改变，因为我也想要它们（也通过LED）。有人可以帮忙

2020-03-26 09:50:23

我在 measurent &automation explorer上可以看到设备但是总是显示connecting to camera

我在 measurent &automation explorer上可以看到设备但是总是显示connecting to camera，旁边显示一个红色的小×号

2016-01-30 11:56:12

无线技术干货大荟萃——无线 ConnecTIng

无线 ConnecTIng 点击查看博文：物联网简介工业应用中的蓝牙低功耗借助无线®网状网络解决方案扩展连接边界 Wittra公司带来了采用Sub-1GHz和低功耗蓝牙®技术的“移动

2018-06-21 13:40:23

求Error connecting to the target(Error - 1143 @0x0)问题解决办法

调试6678过程中，给两个核烧写程序，烧完出现如下错误：Error connecting to the target(Error - 1143 @0x0)C66xx_0: Error

2018-06-21 04:25:20

用于MV/LV配电的自动功率因数控制器包括BOM及层图

are cascaded to drive four digit SS LED display with decimal point.Relay/ Transistor output switching &ndash(...)

2018-09-13 08:44:52

能控制7位7段LED显示2 HC595吗

我能控制7位7段LED显示2 HC595吗？？？？如果是，那么它是怎样的呢？请发送任何代码的例子！！！！！！！谢谢！！以上来自于百度翻译以下为原文 CAN I CONTROL 7DIGIT

2019-01-17 07:25:49

请问Psoc6 DFU支持MDIO接口Dual-app升级吗？

你好，我需要使用PSoc6做MDIO Dual-app升级，但是看了PSoC 6 MCU Device Firmware Update Software Development Kit Guide

2024-02-18 06:11:57

请问STM32 flash dual bank擦除失败怎么解决？

429 FLASH 为1M, 我想配置为dual bank，每块512M.设置DB1M成功。现在想擦除dual bank 15 sector, 即#define

2018-09-19 09:24:23

那位大神帮我看看三位半的数字电压表

***it led=P0^7;unsigned int h;unsigned char digit[4]; unsigned char table[]={0xc0

2015-05-22 23:09:20

MAX15034 pdf datasheet (Config

range of 4.75V to 5.5V or 5V to 28V. A mode select input allows for a dual-output supply or connecting two phases together for a single-output

2008-08-18 12:54:13

ICL7135 pdf datasheet (BCD Out

The Intersil ICL7135 precision A/D converter, with its multiplexedBCD output and digit drivers

2008-12-22 20:57:36

Dual Polarity Antennas

Dual Polar

2009-03-16 09:25:12

AD9627-11,pdf datasheet (Digit

The AD9627-11 is a dual, 11-bit, 105 MSPS/150 MSPS analog-to-digital converter (ADC). The AD9627-11

2009-09-08 08:34:42

LM3503,pdf datasheet (Dual-Dis

The LM3503 is a white LED driver for lighting applications.For dual display backlighting

2009-09-30 09:07:45

LM27965,pdf datasheet (Dual Di

The LM27965 is a highly integrated charge-pump-based dual-display LED driver. The device can drive

2009-09-30 09:13:51

ADP1655,datasheet,pdf(Dual LED

The ADP1655 is a very compact, highly efficient, dual white LED flash driver for high resolution

2009-10-22 10:25:13

ICL7129,pdf,datasheet,Digit LC

The Intersil ICL7129 is a very high performance 41/2-digit,analog-to-digital converter

2010-03-24 10:49:15

CAT4134-500 mA Dual Channel Mo

CAT4134 pdf,datasheet 500 mA Dual Channel Movie/Flash LED Driver The CAT4134 is a high power

2010-04-12 14:57:17

TLC7135,pdf (4 1/2-Digit Preci

technology. These 4 1/2-digit, dual-slope-integrating, analog-to-digital converters (ADCs) are designed to provide interfaces to both a m

2010-06-03 17:26:15

5.5-Digit Multimeter, B-Size A

The AgilentE1326B autoranging 5.5-Digit Multimeter is aB-size, 2-slot, register-based VXI module.

2010-07-09 17:34:28

AS1105,pdf (4-Digit LED Driver

The AS1105 is a LED driver for 7 segment numeric displays of up to 4 digits. The AS1105 can

2010-09-06 09:24:44

AS1100,pdf (8-Digit LED driver

The AS1100 is an LED driver for 7 segment numeric displays of up to 8 digits. The AS1100 can

2010-09-06 09:31:15

FAN6791/FAN6793,pdf (Highly In

The highly integrated FAN6791/3 dual PWMcombination controller provides several features toenhance

2010-10-26 15:10:42

Tech Brief 2: Dual-Polarity Am

in traditional operational amplifier (op amp) circuits. Examples are given for typical op amp configurations (inverting, non-inverting) where the digit

2009-04-20 16:41:54